Krud Kutter

[Fly]

For you guys that wet tumble your brass, I have started using Krud Kutter & it is amazing. I have tryed everything under the sun. Dawn with vinigar lemon shine, Purple Power & so on. I had a contractor years back tell me to try Krud Kutter in my pressure washer for the siding on my house. I did
& never looked back. The other day I picked some up at Lowes & thought I wonder how good this would work on wet tumbling my brass. Dumped a
small amount in with just warm water, nothing else. Run it a couple of hours & WOW. It did a great job. Primer pockets clean, & inside inside the cases
sparkled. Most likely there are others here that use it, but first for me.

Fly:grin:

[dangitgriff]

Ok, I’ll try it, but which flavor are you recommending? There are several formulations available.
R/Griff

[nun2kute]

what are the active ingredients ?

[Fly]

I,m using the original cleaner degreaser. Ingredients? I will have to go out to my shop to see, but I will. It is a water based cleaner that
is safe to use around the house & to environment I do know that.

Fly

[Fly]

what are the active ingredients ?
Here you go! https://www.rustoleum.com/product-catalog/consumer-brands/krud-kutter/cleaners-and-stain-removers/original-krud-kutter

Fly

[charlie b]

Interesting ingredients. Alcohol and lye seem to be the most 'active'.

[ndnchf]

Lye? Yikes, that's some strong stuff. I assume you rinse the brass afterwards.

[remy3424]

I use that to clean the glass on the door of my smoker...I don't have the need to get my brass any cleaner than ground walnut gets it.

[Half Dog]

That’s great news. Can you let us know if the brass maintains its shine after a few months?

[Fly]

Well it has for the last week. We will see. Like I said I have cleaned the siding on my house & used it as a house
hole cleaner, & it works great.

Fly

[Alferd Packer]

Any ammonia in it?

[M-Tecs]

I was surprised by how many product in the Krud Kutter line. https://www.rustoleum.com/product-catalog/consumer-brands/krud-kutter/