View Full Version : Uberti porn
Just some pics
Got my new Uberti 3 1/2" CMS Sat.
258274
5 1/2 inch gun is my AWA longhorn , Ive had for 20 year. That AWA is a little, wee bit, nicer than the uberti alot slicker lighter action. Though the Uperti is a very nice gun.... I'll probably put wolff springs in the Ub
Thats a Tom Tidmore holster that arrived the same time. He makes a very nice colt SA holster
258275
Now to sling some lead 8-)
.
FLINTNFIRE
03-09-2020, 01:13 AM
Top 1873 rifle all 4 pistols to left in picture are uberti right top pistol is a pietta and lower right a ruger wrangler 258278
Lloyd Smale
03-09-2020, 05:41 AM
some fine guns there
Idaho45guy
03-09-2020, 06:03 AM
I'm amazed at the quality of my Uberti/Cimmaron Arms 1873 Peacemaker...
258280
Top 1873 rifle all 4 pistols to left in picture are uberti right top pistol is a pietta and lower right a ruger wrangler 258278
Is one or two of those ubertis the 1860 long grip frame model?
I'm thinkin' of gettin one with the 1860 grip- 4.6 barrel
I wish te offered more 45-70 etc chambered rifles
redhawk0
03-09-2020, 09:05 AM
That 3.5" CMS is gorgeous. Very nice indeed.
redhawk
FLINTNFIRE
03-09-2020, 10:52 AM
I am not sure of the grip frame , tell you the truth I have 1860 reproduction revolvers and I did not compare them , the ubertis were firing pin on hammer still , 38/357 had the screw holding cylinder pin in , all of them except it have had the pin ground so as to have no blocking the hammer with pin pushed in deeper , I bid on a 32-20 32 h&r short barrel but it went way higher then I was willing to go , the ubertis were between 300-315 used but they show no wear other then one in 32-20 has a chip out of grip up high the rifle was used also for 725 and it did not look used at all , I have a 45-70 in a hunter lite wished it looked more like the one in hombre , local gun shop guy made the comment about me going cowboy . I just have always liked the single actions and that 45 colt rifle is so fun to shoot , 32-20 pistol is a hoot also , my preferred carry when out in woods was a ruger blackhawk but the ubertis get carried now .
El Patrón Grizzly Paw model is the 1973 colt with the longer 1860 grip frame installed
258313
Note The grip frame is longer kind of like the longer Ruger super blackhawk long grip frame
Oh,,, I just ordered a Wolff spring kit for my new Uberti,
now I need to re stock up on cast boolits :Fire:
LUBEDUDE
03-09-2020, 05:05 PM
Uberti ‘66
https://uploads.tapatalk-cdn.com/20200309/ef0908f98da544533167a12787ccad28.jpg
bedbugbilly
03-09-2020, 09:03 PM
Sinful . . . . . simply sinful . . . . . I had to tell all my Uberties to cover their eyes and not look . . . . .
Idaho45guy
03-09-2020, 10:00 PM
I have two other Uberti firearms as well.
A Silver Boy .22 and an 1885 Winchester high wall in .45-70 govt.
258336
258337
LUBEDUDE
03-10-2020, 04:17 PM
Pair of Uberti/Cimarron 44 Specials with Elephant Ivory
https://uploads.tapatalk-cdn.com/20200310/865fecbed6424232e95e0391118442e3.jpg
Idaho45guy
03-10-2020, 04:30 PM
Those are COOL! ^^
There are so many model on cimarron's site it is confusing what the difference is in alot of them. Descriptions aren't very informative. I was thinking the Frontiers were all 22s.
What are the Frontiers compared to the same models of the non frontiers?
And the 'Value' guns- brass grip frames ????
What is the difference between model # PP332 and # CA332 ?
https://www.cimarron-firearms.com/products/revolvers/single-actions.html
e
.
Chill Wills
03-10-2020, 10:51 PM
I have two other Uberti firearms as well.
A Silver Boy .22 and an 1885 Winchester high wall in .45-70 govt.
258336
258337
Idaho45guy, Is that a Raton, certificate sticker on the butt of your Winchester 1885?
Idaho45guy
03-10-2020, 11:10 PM
Idaho45guy, Is that a Raton, certificate sticker on the butt of your Winchester 1885?
Yes it is. My dad used it there before gifting it to me. I've only shot it at the Ben Avery range in Arizona for the monthly matches and the state championship match.
Chill Wills
03-11-2020, 12:40 AM
Yes it is. My dad used it there before gifting it to me. I've only shot it at the Ben Avery range in Arizona for the monthly matches and the state championship match.
Nice! Well, there is a good chance I know him. ...Or at least of him.
Love Life
03-11-2020, 08:53 AM
I have to much fun with this little one.
258421
Here she is with new grips:
258422
258423
258424
oneofsix
03-11-2020, 09:23 AM
Mine in 45C
https://uploads.tapatalk-cdn.com/20200311/866a0ba5491f957cec959517b1b1dd72.jpg
Sent from my LG-H820 using Tapatalk
I have to much fun with this little one.
258421
Here she is with new grips:
258424
What brand/ kind of holster is that?
Is that a cimarron/ pietta 'New Sheriff' or Fontier Sheriff ?.... I dont know the difference ?
.
Mine in 45C
https://uploads.tapatalk-cdn.com/20200311/866a0ba5491f957cec959517b1b1dd72.jpg
Sent from my LG-H820 using Tapatalk
I cant find that one with the 3 1/2 inch barrel on cimmarons website... Is that called a Thunderer or a Lightning?
?
LUBEDUDE
03-11-2020, 10:58 AM
I have to much fun with this little one.
258421
Here she is with new grips:
258422
258423
258424
Those are gorgeous grips LL.
LUBEDUDE
03-11-2020, 10:59 AM
Uberti/Taylors’73
https://uploads.tapatalk-cdn.com/20200311/5a91cb156c2272d70820f610ce37fd3d.jpg
oneofsix
03-11-2020, 11:08 AM
I cant find that one with the 3 1/2 inch barrel on cimmarons website... Is that called a Thunderer or a Lightning?
?I had to dig out the box, couldn't remember.
It's a Thunderer.
Sent from my LG-H820 using Tapatalk
Love Life
03-11-2020, 12:07 PM
It’s the frontier sheriff.
It’s the frontier sheriff.
Cimarron rep told me the "Frontier sheriff" #PP332 is made by Pietta, and the "New Sheriff" CA332 is made by Uberti
interesting
Love Life
03-11-2020, 06:50 PM
Probably. Both are spaghetti guns. Pietta doesn’t have the safety junk.
I have a Pietta 1851 cap and ball gun, bout 20 years old, its well made
And now I have a Uberti shortstroke CMS 3 1/2 '' directly from Uberti, Might have to try a Cimarron SA next
kbstenberg
03-11-2020, 07:27 PM
I have to resist! I have to resist!!
375supermag
03-11-2020, 07:35 PM
I have to resist! I have to resist!!
Resistance is futile.
You will comply with the need to acquire multiple Uberti Cimarron firearms.
FLINTNFIRE
03-11-2020, 08:01 PM
My ubertis only had the cylinder pin as the safety, hammer still had firing pin on it , same as pietta I bought it had a 2 position pin also , not needed and soon it was removed , the newer ubertis cattleman2 has a transfer bar system . I like them without any added on safety ideas .
If1Hitu
03-11-2020, 09:40 PM
Top 1873 rifle all 4 pistols to left in picture are uberti right top pistol is a pietta and lower right a ruger wrangler 258278Now that some awesome porn you have there.
Are the Pietta's as nice, fit / finish/ quality as the Uberti's ?
:Fire: :veryconfu:popcorn:
FLINTNFIRE
03-11-2020, 10:29 PM
Mine was nicely fit and other then brass backstop at a glance they look as good to me , I have some pietta 1860 revolvers that I have had for quite awhile and I like them.
elmacgyver0
03-11-2020, 10:31 PM
I just bought a Uberti Cattleman about a week ago.
It has a transfer bar inside of the hammer and a firing pin on the hammer.
The firing pin is not long enough to touch the primer unless the trigger is pulled, quite a novel idea.
Retains the original look but with the added safety of a transfer bar.
They still tell you to load only five though.
LUBEDUDE
03-12-2020, 10:25 AM
Pair of Cimarron 1851 Open Top cartridge conversions.
(I put the snakes on before Cimarron offered them)
https://uploads.tapatalk-cdn.com/20200312/3fbb12e837ac258d54d89026d2f6f16c.jpg
Anybody Have one with the Brass Trigger guard/ grip frame
Looks like thats the Uberti Hombre(matte blue) or THe Cimmaron Pistolero by Pietta (std blue)
The brass Grip Frame models are less $$ too
Pistolero
.258490
Hombre
258491
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.