Grip-n-pull

[trapper9260]

Some one I know sent me link on this and wonder if anyone has one and try it on cast boolits.
https://grip-n-pull.com/

[NoZombies]

Some one I know sent me link on this and wonder if anyone has one and try it on cast boolits.
https://grip-n-pull.com/

I had one nearly identical, though of much older manufacture, and it did just fine at pulling cast, but like anything else, deformed them enough that the bullets weren't re-loadable. Fine for pulling ammo down, but the cast bullets went back in the pot for remelt. A pair of old dull side cutters have the same end effect, are cheaper, and more universal, so that's what I went back to.

[trapper9260]

Ok that is what I was wonder about ,I will stick with the hammer puller I use then,I can reuse the boolits that way. It looks like would be ok with jacket bullets for what I seen on the video.