View Full Version : Any issues with shooting jacketed bullets and then powder coated bullets?
Triggerfinger
01-19-2020, 09:01 AM
Can i shoot jacketed bullets and then powder coated bullets without cleaning the barrel? Any issues with copper fouling and then shooting PC bullets?
charlie b
01-19-2020, 09:34 AM
Depends on your barrel, but, no you will probably not have an issue. Just more cleaning than PC bullets alone :)
Rcmaveric
01-19-2020, 10:01 AM
A couple of jacket bullets help clean out a barrel.
Sent from my SM-G965U using Tapatalk
Kraschenbirn
01-19-2020, 12:56 PM
Actually, I've noticed that I seem to get almost NO copper fouling in my CF rifles when I shoot jacketed after a 'few'...maybe, 25 or so...rounds of PC'd.
Bill
Triggerfinger
01-19-2020, 07:52 PM
Thanks guys, I'll see how this works in my 308.
frankmako
01-19-2020, 11:21 PM
i do it all the time. pc or fmj bullets mix. never had any problems.
Phlier
01-28-2020, 11:20 AM
A "Day at the Range" for me means shooting 500 to 1,000 rounds of PC'd 9mm through one gun. About a year or so ago, I started shooting one mag of FMJ's at the end of the day's shoot to make the barrel easier to clean. It worked so well that I'm still doing it.
charlie b
01-28-2020, 11:29 PM
You guys must have 'smoother' barrels than I do. :)
I did a shoot with cast and then jacketed in my .308. The results were good. Less than 1 MOA with my cast bullets at 200yd and then two groups of ten with jacketed that were a bit more than 1/2MOA (8-12mph cross wind). I will repeat this a few more times just to see how things go but I am happy with it.
I still get copper fouling in the bore, just not as much. Keep in mind that this barrel has always had a lot of copper fouling when shooting jacketed.
GregLaROCHE
01-29-2020, 12:59 AM
I shoot a round or two of smokeless, usually PCed, after shooting BP in my .45/70. It makes clean up a lot easer.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.