PDA

View Full Version : Lyman 452-66



sgms18
01-11-2020, 06:09 PM
Can yall tell me anything about this mold? I can't seem to find a good picture of what this bullet looks like. Just that it's a 200gr bevel base flat nose. Is that right? Also why is this a 5 digit designation instead of 6 digits?

skeettx
01-11-2020, 07:33 PM
Early Ideal mold
215 grain
Old number is 45266, new number is 452066,
Discontinued

Nice 45 ACP bullet

https://www.three-peaks.net/bullet_molds.htm

https://www.bullseyeforum.net/t242-185g-or-200g-for-the-long-line

sgms18
01-11-2020, 08:16 PM
Early Ideal mold
215 grain
Old number is 45266, new number is 452066,
Discontinued

Nice 45 ACP bullet

https://www.three-peaks.net/bullet_molds.htm

https://www.bullseyeforum.net/t242-185g-or-200g-for-the-long-line

Thank you! That new part number helps alot.

GBertolet
01-11-2020, 08:49 PM
I have this mold in 4 cavity. A friend had given me a handfull of these bullets to try, and wow did they shoot great. I had been looking for one of these for several years, until I found one for sale on the other cast bullet forum. It was only made for about 2 years in the early 1980's. It is 215 grains, and actually more of a boattail than a bevel base. To this point, it is the most accurate bullet I have found for my Clark Longslide. Mine tends to cast a little on the large side, @ .455. The bullet basically looks like a 452460 without the boattail.

sgms18
01-11-2020, 10:33 PM
I really appreciate the info. Yall just helped me get a great Ebay deal on a 4 cavity w/handles.

Burnt Fingers
01-12-2020, 02:15 PM
I really appreciate the info. Yall just helped me get a great Ebay deal on a 4 cavity w/handles.


Ya mind telling me what ya got that for? I had looked at that mold but didn't bid on it. I had recently picked up a 452630 four cavity so I passed on the 45266

sgms18
01-12-2020, 02:35 PM
I was the only bid. $59.99
With shipping & tax it was 80 & some change

Good Cheer
01-13-2020, 06:23 PM
It's also a good mold for Dragoons and Walkers.

GBertolet
01-13-2020, 07:11 PM
Being mine drops out at .455, as well as being good for my longslide, it is also perfect unsized, for my S&W 25-2, that has .456 cylinder throats.

Burnt Fingers
01-18-2020, 12:37 PM
I was the only bid. $59.99
With shipping & tax it was 80 & some change

Not bad at all.