Suggestions on a gunsmith for cut, thread and flute on a Savage Bolt gun.

[bluejay75]

Greetings Gents,

I am in the RDU Triangle/ Fort Bragg area of NC. I would like to deal with someone local but would not be opposed to shipping for good work.

Any suggestions welcome.

Want to get a Savage 308 cut to 16.5 threaded and fluted maybe cerakoted or duracoated too.

Bluejay

[John Taylor]

I can do cut, crown, thread and flute. Don't do finish work.

[waksupi]

Keep in mind the barreled action must be fully inletted before sending out the metal for finish. A pro gun builder may be able to pull it off without putting marks on the barreled action, but it takes a lot of experience to do it.

[bluejay75]

Anyone else have any suggestions?

I had the Savage done locally but would love if I could find someone to work on some Handi rifle barrels.

[Jniedbalski]

You can look on line for prefit barrels and do it your self for the savage.If you can find the size and fluted barrel you want. A lot of premium barrel companies out there and some you can order size fluting and finish .