NorthMoccasin
12-01-2019, 12:27 PM
Recently I have been playing with cast in several 25 cal. rifles, to include 25-20, and 2 25-35 AI's. Then I remembered a Ruger 250 Savage AI in the back of the safe that had not been fired in 10 years or so. On paper, not the best candidate for a CB rifle, short neck, too much powder capacity, etc. But I put together a set of loads using the molds I have (Lyman 257418, 257312 and 257420) Surprise! with 10.0 Gr of Unique, groups are hovering around 1/2 to 5/8 inch at 50 yards. For a light weight sporter with a 3x9 scope I am quite pleased. All but the 257420 are seated well below the bottom of the case neck, but it does not seem to matter. More experiments with different charges and powders such as SR4759 and AA5744 are in order. Got a new mold, the RCBS 25-85, a plain base to add to the fun.