Auction, Some RCBS dies

[cat-mechanic]

OK, here goes nothing. Tired of looking at these. Bidding starts at $1. Add $8 for shipping in a small flat rate box and these will get to your door for your high bid.

Bidding will run until Sunday 11-17-19 at noon AZ time.

RCBS 38/357 grouping of dies. First is a size die, marked 38-357 Size 82 has no decapper stem. Next is a seat die, marked 357 MG #3 80 and has the seat stem in it. Then universal size die body that has a decapper stem in it, marked 38 SPC The decapper stem also has the expander built into it. Circled in green in picture

RCBS 30 Carbine, universal size die body with a 30 carbine expander in it. Circled in Blue in picture

https://www.AR15.Com/media/mediaFiles/48955/InkedRCBS_Dies_LI_jpg-1131621.JPG

[cat-mechanic]

Anybody? I didn't think my starting price was that high. :D

[lonewelder]

$1 on the 38 dies to get things started

[Jniedbalski]

I would bid but I already have a 38 /357 die. Nice looking

[Jackpine]

I will bid it to the top. A whole $2 for the 38s and $1 for the 30 carbine, to get it going.

[Blazenet]

$4.00 on the 38's and $2.00 on the carbine

[cat-mechanic]

$4.00 on the 38's and $2.00 on the carbine

Blazenet, they all go for one money. So you are in for $4 for everything.

[6bg6ga]

The full length resizing die non carbide?

[metricmonkeywrench]

why not $6 for the set...

The .38 set is an older steel (non carbide) set

[cat-mechanic]

Correct, there is no carbide in these. The 38 seat die was made in 1980 and the size die was made in 1982. All steel.

[cat-mechanic]

1 day left, Get your bids in.

[cat-mechanic]

2 hours left.