View Full Version : Looking for a lee .360 lube sizing die
Tripplebeards
11-04-2019, 03:43 PM
Well I just slugged my 35 Whelen and it’s slugs between .358” to .358 & 1/2” so my factory .358” sizer isn’t going to work. I figured before I start polishing my die id check and see if anybody’s got an extra one out there they’re not using,thanks.
cwlongshot
11-04-2019, 04:23 PM
That’s a custom one for LEE.
(Unless someone has a used one)
CW
Tripplebeards
11-04-2019, 05:56 PM
That’s a custom one for LEE.
(Unless someone has a used one)
CW
Yeah, I know. I traded my .358” lee sizer to a member here a few years back for his die he polished out to .359”...and it’s .358” diameter( I just sized a boolit with it and measured)... so I’m back to the drawing board.
Tripplebeards
11-04-2019, 07:44 PM
Well I just followed this YouTube video and did the same till it sized to .360” so I’m good now.
https://youtu.be/IEa2jeV-BKs
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.