Brno 22 Hornet

[iomskp]

I just picked up a old Brno Fox 22 Hornet, I was wondering if anybody is casting for 22 hornets and what moulds are they using.

[cwtebay]

I have used a Lyman 225438 (41gr weight with plumbing scrap) with very good results as long as I keep my velocity <1750fps. Otherwise I get crazy leading. Accuracy is 1.25 moa in a Savage 340A. Puts the smack on ground squirrels for my son!!

Sent from my Pixel 3 XL using Tapatalk

[10x]

NOE 37 grain 10 cavity mold
Five with Gas check, five with plain base
Plain base with powder coat and 2.5 grains of Dupont Bulk give a jagged 1/2 inch hole at 25 yards.

[Intel6]

For my magazine fed Anschutz's I also like the NOE 37 gr. bullet, it i my primary bullet for .22 hornet. For some of my single shots in Hornet I also like the NOE 45 gr. WFN bullet.

In the pic below I show some culls as examples L t R:

NOE copy of the RCBS 55 gr.
NOE 45 gr. WFN plain base but I also hav a GC version
NOE 37 gr.

249477

[mvozz]

I saw some folks casting for the 17 Hornet so I decided to try some for my Ruger #3 22 Hornet. NOE seems to be working good for me! By the way, this is 10 shots!
249487