PDA

View Full Version : locking nuts for the old C&H dies



stevenjay1
09-02-2019, 10:23 PM
does anyone know where I can find the thin 7/8x14 locking nuts for the old C&H die sets?
Thanks, Steve

NyFirefighter357
09-03-2019, 06:46 AM
https://www.mcmaster.com/hex-jam-nuts

https://www.fastenal.com/products/details/36268

https://www.google.com/search?client=firefox-b-1-d&q=7/8-14+thin+nut&sa=X&ved=2ahUKEwixkuqwurTkAhWIjVkKHUZGAV0Q1QIoAnoECAoQA w&biw=802&bih=643

https://www.google.com/search?client=firefox-b-1-d&biw=802&bih=643&ei=d0NuXcqOO4a85gK8gaSYDg&q=7%2F8-14+jam+nut&oq=7%2F8-14+jam+nut&gs_l=psy-ab.12..0j0i8i30l2.234447.235735..238085...0.5..0.9 2.256.3......0....1..gws-wiz.......0i71j0i7i30j0i8i7i30.4QW8rWES5rY&ved=0ahUKEwiKpvXnu7TkAhUGnlkKHbwACeMQ4dUDCAo

salpal48
09-03-2019, 08:02 AM
call CH4d directlyOr go on Ebay
Ask for Denny

stevenjay1
09-03-2019, 05:12 PM
thanks for the leads. I should have been a little more specific. I need about thirty nuts. I previously checked with 4d and they no longer use the two nut locking system, others are out of stock or sell by the 1000. I lucked into a large group of old C&H Dies that were all missing the locking nuts. I could use the RCBS or Lyman or Lee locking rings but I wanted to keep the dies as original as possible. I doubt I'll use these but they do make a nice display Thanks, Steve

pwc
11-08-2019, 10:07 PM
Are you going to use the dies; go to home depot, doesn't have to be thin.

If you are just going to dosplay, keep looking.

All my "old" is still productively working