PDA

View Full Version : ACTIVE: MP Molds 3118 Brass Cramer PB or GC mold



2 dogs
07-28-2019, 10:41 AM
MP Molds 3118 3 Cavity Brass Cramer Plain Base or Gas Check mold Hollow Point mold on the two cavity blocks or a 6 cavity brass solid PB or GC on the four cavity blocks or an 8 cavity solid PB or GC on the aluminum blocks. This is an old Group Buy mold from the Lee era. The dimensions were taken from an old very accurate Ideal mold. This should be "ideal" for all the 32 caliber pistol shooters. It should cast at 0.314" dependent on your alloy and easily sizes smaller. The weight is as shown on the drawing dependent on your alloy of choice.

We will run this (on 2 forums) until we get the number we need (probably 34 HP molds due to current supply conditions) or more, then it is up to MiHec to decide when to make it........ it can be a long time.... be warned and no whining.

I am offering these choices: Brass 3 cavity PBHP, Brass 3 cavity GCHP, Brass 6 cavity PB solid, Brass 6 cavity GC solid, Aluminum 8 cavity PB solid and Aluminum 8 cavity GC solid.

Pins included are: For the Hollow Point Molds are 1) Large HP pin, 2) Medium Penta HP pin, 3) Cup HP pin, 4) Blank pin for a flat nose or in the case you don't want HP pins sticking out the mold.

Prices are:
3 cavity cramer HP's on two cavity brass blocks (110 euros shipped full price) - 93,5 euros with 15% off
I will have to get the other prices.

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec or contacting MP Molds directly . Invoices will be sent out via e-mail from the listed e-mail addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars dependent on the time that occurs. After you pay, the mold gets shipped.

Prices are somewhat variable due to the exchange rate.... be aware of this.

Post your disguised e-mail address (imashooter AT gmail DOT com), mold choice, number of cavities, base style (PB or GC) and number of molds wanted (one to however many).

http://i.imgur.com/2WLBxb0.jpg (https://imgur.com/2WLBxb0)

3 cavity brass Plain Base

01. eagle-rain AT cox DOT net....1 mold
02. thadd3220@ yahoo dot com....1 mold
03. Mchurdii@yahoo dot com....1 mold
04. dimner AT gmail DOT com....1 mold
05. paska_10 AT @ hotmail DOT com....1 mold
06. ieharm AT hotmail DOT com....1 mold
07. johnsmiles1961 at gmail dot com....1 mold and 1 set of handles
08. tomgarcia15 at yahoo dot com....1 mold
09. lodagener at gmail dot com....1 mold
10. tward91574ataol.com …..1 mold
11. geoffsmiller826 AT gmail DOT com....1 mold
12. mrsparkman at mrsparkman dot com....1 mold
13. ryulick at gmail dot com....1 mold
14. kc2skg AT gmail DOT com...1 mold and 1 set of handles
15. kknmp AT yahoo DOT com....1 mold
16. js DOT graham at mindspring DOT com....1 mold
17. dbn dot grizz at gmail dot com....1 mold
18. jeepers2 AT citlink DOT net....1 mold
19. Redoldspot at gmail dot com....1 mold

3 cavity brass Gas Check

01. dimner AT gmail DOT com....1 mold
02. Redoldspot at gmail dot com....1 mold and 1 set of handles
03. 6shot AT yahoo DOT com....1 mold
04. xp30br at gmail.com....1 mold
05.

6 Cavity Brass solid with GC

01. dragon813gt at yahoo dot com.... 1 mold
02. dcasad(at)hotmail(dot)com....1 mold and 1 set of handles
03. LorgioDOTbarreroATgmailDOTcom....1 mold

6 Cavity Plain Base Solid

01. dragon813gt at yahoo dot com ….1 mold
02. dcasad(at)hotmail(dot)com....1 mold and 1 set of handles
03. hplongrange at gmail dot com....1 mold
04. 314livewire at comcast dot net....1 mold

8 Cavity aluminum mold plain base

01. winchester1873jjg at gmail dot com....1 mold

reddhawkk
09-12-2019, 10:54 PM
I would be interested in a brass 3 cavity PBHP, one mold, eagle-rain AT cox DOT net

bronte454
09-18-2019, 06:03 AM
I would be interested in a 3 cavity PBHP . Email is thadd3220@ yahoo dot com

OKMike
01-19-2020, 12:01 AM
Put me down for a brass 3 cavity PBHP. Mchurdii@yahoo dot com

Dimner
02-05-2020, 03:55 PM
I would be interested in a total of two molds.

1) brass 3 cavity PBHP, one mold,
2) brass 3 cavity GCHP, one mold,


dimner AT gmail DOT com

Teemu
02-13-2020, 12:55 AM
Can I have one, 3-cavity brass PBHP
Thanks.
paska_10 AT @ hotmail DOT com

bronte454
02-28-2020, 12:06 AM
Anything going to happen with this ?

2 dogs
04-08-2020, 06:08 PM
Anything going to happen with this ?

Yes Sir, we are active and my spies tell me we are getting close.....

2 dogs
04-08-2020, 06:16 PM
Updated to reflect 6 molds. There are currently 17 molds on the other forum. So we are close to getting this one ready to close. I believe 10 more molds on both forums would do it for us.

harm
04-24-2020, 10:53 AM
I'd like a 3-cavity Brass PBHP - ieharm AT hotmail DOT com

osteodoc08
05-01-2020, 12:24 AM
3 cav brass PBHP tom gar cia 1 5 at yahoooooo dot com

2 dogs
05-21-2020, 11:35 AM
updated to 9 molds

Renego
05-21-2020, 01:57 PM
I'll take one mold: Brass 3 Cavity PBHP Renegado at twc dot com

harm
05-22-2020, 04:46 PM
I see I'm listed for two of these - pretty excited about it but still should only be down for one.

ddixie884
05-22-2020, 05:47 PM
Nice..............

Rick B
05-25-2020, 12:55 PM
Currently signed up on the other forum. This is the ultimate 32-20 bullet. Crimp groove has been added in the exact location to maintain proper OAL in 1873 & 1892 Winchester’s. Could also be sized down for a variety of 30 caliber cartidges. Really looking forward to loading and testing this offering.
Rick

AggieEE
05-26-2020, 04:19 PM
3 cav HPGC brass all pins 1 mold. dale1 at idworld dot net

Dimner
05-27-2020, 01:29 PM
Currently signed up on the other forum. This is the ultimate 32-20 bullet. Crimp groove has been added in the exact location to maintain proper OAL in 1873 & 1892 Winchester’s. Could also be sized down for a variety of 30 caliber cartidges. Really looking forward to loading and testing this offering.
Rick
I'm buying this for my savage1899 in 303 sav, my sav340 in 30wcf, and my 1903a4. This profile at .312 has worked great in all 3 formats. I can't wait for some HPs to try!

Rick B
05-28-2020, 10:50 AM
That’s the beauty of this particular bullet. The ultimate 32-20 design that can be also be sized and used in all the 30 caliber cartridges. Should work great in a 30-30. Looking forward to trying it in a 30 Carbine. Hope it feeds. Also waiting to try this design in the 30 caliber Contender barrels also.
Rick

2 dogs
06-01-2020, 04:28 PM
Updated 10 molds

2 dogs
06-01-2020, 04:28 PM
I see I'm listed for two of these - pretty excited about it but still should only be down for one.

Fixed it. Thanks!

dragon813gt
06-21-2020, 08:38 AM
1 - Brass 6 cavity GC Solid
dragon813gt at yahoo dot com

Ramslammer
06-21-2020, 07:58 PM
G'Day
What will the 8 cav cost?
thanks

2 dogs
07-15-2020, 11:42 PM
G'Day
What will the 8 cav cost?
thanks

We generally don't get the final cost until closer to the buy. Especially on some of these buys that go on for quite awhile. You can PM Miha and ask or I can just sign you up and you can always opt out.

2 dogs
07-15-2020, 11:43 PM
Updated

Renego
08-18-2020, 04:20 PM
2 dogs,

I have changed email address. Please change order info for
3 Cavity Brass Plain base for

"09. Renegado at twc dot com....1 mold"

to "lodagener at gmail dot com....1 mold"

Thanks.

barefooter175
08-29-2020, 03:22 AM
One - Aluminum 8 cavity PB solid

barefooter175
winchester1873jjg at gmail dot com

sixshot
09-05-2020, 11:11 AM
I'll take one in 3 cavity HPGC. Plain base please. 6shot@Yahoo.com

Thanks, Dick

2 dogs
09-08-2020, 07:05 PM
updated

tward
09-12-2020, 09:33 AM
Iím in for a 3 cavity plain base! tward91574ataol.com

kirb
10-03-2020, 02:42 PM
I would like a brass 3 cavity hp plain base
Thanks
Kirb

xp30br at gmail.com

mattw
10-03-2020, 03:34 PM
Can you tell me the diameter this will drop, more or less? I am thinking of using it in 32 H&R, would like .312 or .313.

sixshot
10-03-2020, 10:47 PM
Please delete!! I want the original plain base, sorry!

Dick

dragon813gt
10-10-2020, 01:11 PM
Put me down for another mold
6 cavity PB Solid
dragon813gt at yahoo dot com

2 dogs
11-01-2020, 03:53 PM
I would like a brass 3 cavity hpgc
Thanks
Kirb

I need your email address Sir.

2 dogs
11-01-2020, 03:54 PM
Can you tell me the diameter this will drop, more or less? I am thinking of using it in 32 H&R, would like .312 or .313.

I would say closer to .314" but you can email Miha to be sure.

2 dogs
11-01-2020, 03:56 PM
updated

kirb
11-01-2020, 06:25 PM
Sorry xp30br at gmail.com

Thanks kirb

JohnSmiles
11-10-2020, 10:16 PM
3 cavity brass Plain Base please
johnsmiles1961 at gmail dot com

2 dogs
11-24-2020, 07:03 PM
updated

Max2005
12-08-2020, 11:15 PM
Put me down for 1 of the 3 cavity PBHP.

geoffsmiller826 AT gmail DOT com

35 Whelen
12-24-2020, 02:44 PM
Sign me up for 1 ea. Brass 3 cavity GCHP.

ggibbs08 at yahoo dot com

chsparkman
12-29-2020, 12:44 PM
I would like one Brass 3 cavity PBHP. Thanks
mrsparkman at mrsparkman dot com

2 dogs
01-22-2021, 12:41 PM
updated to reflect 20 molds

MrWolf
01-22-2021, 06:27 PM
I would like one Brass 3 cavity PBHP. Thanks
ryulick at gmail dot com

2 dogs
01-28-2021, 12:48 AM
updated

Namadji
01-30-2021, 02:03 AM
Put me down for one 3 cavity brass PBHP please.
jeepers2 AT citlink DOT net

DBN
02-07-2021, 11:56 PM
Put me down for a 3 cavity pbhp please. dbn dot grizz at gmail dot com

Rick B
02-08-2021, 12:26 AM
Please add a 6 cavity PB brass mold to the growing list. Thanks again for Honcho'ing this group buy. hplongrange at gmail dot com.
Rick

Two Barrels
02-08-2021, 09:57 PM
Please add me to the list for (1) brass mold, 3 cavity, PBHP.

js DOT graham at mindspring DOT com

Thanks!

Rick B
02-12-2021, 09:52 PM
This group buy is at 19 each 3 cavity molds on the S. A. site. 21 each 3 cavity molds on Cast Boolits. That puts our pin count at 120 each, this exceeds the 100 pin minimum. Hope this Group Buy is on Miha's run list.
Rick

19112TAP
02-16-2021, 01:41 PM
Please add me to the list for (1) brass mold, 3 cavity, PBHP.

kknmp AT yahoo DOT com

TimD
03-15-2021, 11:03 AM
Please put me down for One 3 Cavity, Brass, PBHP, + HANDLE

kc2skg AT gmail DOT com

Thanks,
Tim

Cimarron Red
03-20-2021, 01:45 PM
A quick question on this design: Can anyone tell me the diameter of the nose at several points, say .100" and .200" ahead of the crimp groove? I ask because I have several N.O.E., .314" molds that drop bullets that are too fat, and the bullets have to be jammed into the rifling. So I cannot use these molds. Thanks.

dg31872
03-24-2021, 10:46 AM
I would like a gas checked mould. DGD dot 72 dot 2011 At g mail dot com.

pack3480
03-29-2021, 08:08 AM
One brass 6 cav PB solid and handle
One brass 6 cav GC solid and handle

dcasad(at)hotmail(dot)com

JohnSmiles
03-30-2021, 08:20 PM
3 cavity brass Plain Base please
johnsmiles1961 at gmail dot com

Could you add handles please?

Lakeland terrier
04-13-2021, 12:04 PM
Could I please have a brass 3 cavity PBHP mould

Coldweld AT live DOT com

JohnSmiles
04-17-2021, 08:08 PM
Remove my name. Sorry, but I will not spend another dime, or another minute on this site, currently run by facebook fact checker wannabes.
This used to be a great place.
A damned shame.

No_1
04-18-2021, 06:55 AM
Remove my name. Sorry, but I will not spend another dime, or another minute on this site, currently run by facebook fact checker wannabes.
This used to be a great place.
A damned shame.

Good bye John. I hope you find peace.

Lakeland terrier
04-25-2021, 06:39 AM
How close are we to hitting the target for completion of the order ?

35 Whelen
04-25-2021, 09:47 AM
Please remove my name from the list.

Thanks.

35W

dg31872
04-25-2021, 10:18 AM
Please withdraw my name from this group buy.

Green Frog
04-29-2021, 02:03 PM
OK, it’s a year and a half in. What is the current order count? Is this anywhere close to coming to fruition? Has Mihec put it on his work schedule yet?

Green Frog

AggieEE
05-04-2021, 01:53 PM
I have to drop out due to health reasons. dale1 at idworld dot com. Sorry guys.

35 Whelen
05-04-2021, 10:26 PM
Sorry, forgot my email address.

Please remove ggibbs08 at yahoo dot com.

Thanks.

Lakeland terrier
05-05-2021, 09:38 AM
Please remove my name off the list.
Thank you

HATCH
05-05-2021, 11:14 AM
2 Dogs hasn't logged into CB since Feb.

Let me give yall a basic run down on the current Group Buy status.

Basically ALL group buys are sitting still.
The manufacturers aren't running them. They can barely keep up with regular orders.

2 dogs
05-05-2021, 11:46 AM
Updated

If you want to be taken off the list please list your email address so I don't have to go find it.

If these group buys take too long then perhaps they are not for you.

Thanks for your patience.

2 dogs
05-05-2021, 11:47 AM
Please remove my name off the list.
Thank you

I got it taken off for you but please provide your email address so the honcho doesn't have to go find it.

2 dogs
05-05-2021, 11:47 AM
I have to drop out due to health reasons. dale1 at idworld dot com. Sorry guys.

My best to you Sir. I hope you get better and come back to us.

2 dogs
05-05-2021, 11:48 AM
OK, it’s a year and a half in. What is the current order count? Is this anywhere close to coming to fruition? Has Mihec put it on his work schedule yet?

Green Frog

Sir, you might want to email Miha directly. I am standing by until he gives the word to close this buy.

2 dogs
05-05-2021, 11:49 AM
Please withdraw my name from this group buy.

I got it taken off for you but please provide your email address so the honcho doesn't have to go find it.

2 dogs
05-05-2021, 11:52 AM
How close are we to hitting the target for completion of the order ?

Sir, you might want to email Miha directly. I am standing by until he gives the word to close this buy.

2 dogs
05-05-2021, 11:56 AM
Some of these group buys have taken 3 years in my experience. However Miha has always delivered.

I have us at 27 molds.

Lakeland terrier
05-05-2021, 12:19 PM
Coldweld AT live DOT com

Email as requested for removal !

Rick B
05-05-2021, 12:21 PM
Thanks for updating this Group Buy thread. 19 molds on the Single Action site also. Combined total of 47.
Rick

Dimner
05-05-2021, 03:06 PM
Is the honcho activitly communicating with Miha on where we are at with number of molds having been signed up for? (47 total) or is this group buy setup for Miha to check this thread and the other forum on his own?

Rick B
05-05-2021, 05:09 PM
With the current medical and political issues. Anything firearms related has been affected. Mold producers like M&P, Accurate and NOE are way behind. For example Tom at Accurate, in the past listed a 10 day turnaround time. Normally it was actually 2-3 days. Last time I looked it was 10 weeks. Resale and auction prices are at a all time high. Watched a buy it now, new 4 cavity M&P go for 249.00 several days ago.

Due to the current situation, business as usual is out the door. As Two Dogs stated, Miha has always managed to fulfill group buys. Now more than ever, one needs a great deal of patience. A quick heads up to Miha wouldn't hurt.
Rick

HATCH
05-05-2021, 05:17 PM
As I mentioned above, this is effecting EVERY group buy regardless of who is honcho or the manufacturer.

2 dogs
05-09-2021, 08:52 AM
Is the honcho activitly communicating with Miha on where we are at with number of molds having been signed up for? (47 total) or is this group buy setup for Miha to check this thread and the other forum on his own?

Sir, Miha knows where to find us. He will let us know when we are ready. I have been running group buys for quite some time and this kind of wait is pretty normal. Hold fast guys.

rcn11thacr
05-20-2021, 03:36 PM
I’m in. Brass 3 cav GC HP, all pins
Redoldspot at gmail dot com

2 dogs
05-21-2021, 11:02 AM
updated

imsoooted
05-28-2021, 04:33 PM
I’d like a brass 6 cavity PB solid please.

I need your email address to add you to the list please.
314livewire at comcast dot net

2 dogs
06-10-2021, 01:36 PM
updated

TimD
06-11-2021, 10:57 AM
I noticed I am listed twice:

3 cavity brass Plain Base

14. kc2skg AT gmail DOT com...1 mold and 1 set of handles
19. kc2skg AT gmail DOT com....1 mold and 1 set of handles

I only need one.

Thanks!

2 dogs
06-12-2021, 11:41 AM
Fixed. Thank you Sir.

rcn11thacr
07-10-2021, 09:06 AM
I’m in. Brass 3 cav GC HP, all pins
Redoldspot at gmail dot com
Please add:
Brass 3 cav PB HP, all pins.

Total of two molds

2 dogs
07-16-2021, 09:27 AM
Updated

Camba
08-17-2021, 11:57 AM
I would like a 6 cavity brass solid gas check.
LorgioDOTbarreroATgmailDOTcom
Thanks

2 dogs
08-25-2021, 07:37 PM
Noted.

rcn11thacr
09-05-2021, 04:11 PM
I’m in. Brass 3 cav GC HP, all pins
Redoldspot at gmail dot com
Please add handles to my order

2 dogs
09-08-2021, 11:57 PM
updated