RCBS Green Machine

[Savvy Jack]

After researching for quite some time I finally decided to get one. Tonight, all but a few "custom parts on order", I finally finished enough to demonstrate.

Machine now feeds 44-40, 44 Magnum and 45 Colt.


https://www.youtube.com/watch?v=RItQliwJ5vc&list=PL5bplooWWnaRaRXBja-37lz3Xt149HoeB&index=8

[Cougar Hunter]

Nice Jack! Your going to get a lemon to work like a peach.
I bought a new one back in '86, in 45ACP. I still use it, but gave up on the primer system shortly after purchase. I prefer to use a bench mounted primer anyway. I still use mine and if you are patient and go slow they make very nice ammo.

[OS OK]

Nice work Jack...it's good to see another old girl stomping out good ammo.

Like Hunter...I bring pre-primed brass to mine rather than wrestle with it on the press...loading ammo should be a pleasurable hobby.

https://www.youtube.com/watch?v=Tji-7WRA3DA&t=2s

If you ever break your inertia puller...you can fashion a nice 'T' handle from what's left to replace that black ball, it's comfy to use this way...

https://i.imgur.com/ZeybYIH.jpg

[Savvy Jack]

Nice guys!!!

Lets keep'em going.

I am getting some primer tubes that will fit in the primer slot. I see several folks doing that with these.
I am certainly never in a hurry but should certainly be faster with the primer tubes.

Here is my youtube playlist that somewhat shows my ignorance and progress!!

https://www.youtube.com/playlist?list=PL5bplooWWnaRaRXBja-37lz3Xt149HoeB