View Full Version : marlin 336 38-55 re-bore
Pioneer2
07-03-2019, 12:11 AM
Got her out to the range today and with a 375296/273gr FN GC over 32 gr of IMR 3031 in Starline long cases and Fed LRP's managed a 1" 3 shot group at 100 yards benched with a 4x Leupold.Velocity unknown at this time but it should relax moose and mule deer just fine if I get my draws.They were sized .379 as that as small a sizer as I had taking them down from .381 The groove is cut .376 1-16" but these big bullets feed fine so I guess I'm ok there.Formerly a early 1950's 30-30 half mag carbine 20" not a waffle top but pre -crossbolt safety.
Texas by God
07-03-2019, 12:21 AM
That sounds like a stomping load for sure. Re bored or rebarreled? You are ready to hunt.
Harleysboss
07-04-2019, 09:18 AM
I just got off the phone with JES Re-bore and have made arrangements to send off my newly acquired Win 94 Canadian Centennial 30-30. It has the octagon barrel and will become a 38-55. I know that may make some collectors cringe but I'm not from Canada, the rifle is in good shape but no means a collector and with the octagon barrel I figure it should be a cowboy caliber.
Texas by God
07-04-2019, 10:59 AM
Dang hot and facing the morning sun; I did better after I smoked the front sight. Then I quit before I was totally sweat- wet.....
I love my JES 38--55.https://uploads.tapatalk-cdn.com/20190704/b62af9171ee26753eedf5f27a12b4f0d.jpg
Sent from my SAMSUNG-SM-G930A using Tapatalk
Pioneer2
07-04-2019, 08:24 PM
Any idea of the velocity of that load? Looks fine as well I have 10 lbs of that so may see how it shoots as well.My Marlin didn't care for RE#7 much so far.
Uncle Grinch
07-04-2019, 09:36 PM
TBG.... nice sharp photography of a nice Winchester. I’ve got one by JES done on a Marlin Texan.
Texas by God
07-04-2019, 11:23 PM
TBG.... nice sharp photography of a nice Winchester. I’ve got one by JES done on a Marlin Texan.Marlin Texan? Now you're just bragging! And so would I! I'm going to get my shooting done before dawn tomorrow, then back to brush hogging[emoji58]
Sent from my SAMSUNG-SM-G930A using Tapatalk
Pioneer2
07-09-2019, 12:07 PM
Well I got my antlerless moose,mule doe and mule buck tags.Looks like the 38-55 re-bore will get baptized in November Lord willing.
Texas by God
07-09-2019, 03:54 PM
Any idea of the velocity of that load? Looks fine as well I have 10 lbs of that so may see how it shoots as well.My Marlin didn't care for RE#7 much so far.I haven't chrono'd it but my shoulder tells me it's around 13-1400 fps.[emoji16]
Good luck on your hunts. Go forth and poke REAL .38 CALIBER holes in said animals!
Sent from my SAMSUNG-SM-G930A using Tapatalk
Prodigal Son
07-09-2019, 05:46 PM
Would love to be where Pioneer 2 will be this fall!
Pioneer2
07-10-2019, 07:56 PM
Load chronied 1619 fps today.
Pioneer2
07-11-2019, 05:30 PM
Load chronied 1619 fps today.Wonder if I should try some .377 dia before ordering some in bulk? Groove is .376 and the caster doesn't make .378
Pioneer2
08-09-2019, 02:08 AM
Hell ,I just went and ordered 500 /.379's as they chamber and shoot well.
ole_270
08-09-2019, 08:28 AM
I haven't chrono'd it but my shoulder tells me it's around 13-1400 fps.[emoji16]
Good luck on your hunts. Go forth and poke REAL .38 CALIBER holes in said animals!
Sent from my SAMSUNG-SM-G930A using Tapatalk
Might be a tad higher as I get 1400 with 21 gr and a tuft of dacron in my 20" JES Marlin.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.