PDA

View Full Version : 40/10mm Lego



nhyrum
06-27-2019, 03:28 PM
This might be an interesting one. I know for sure I'd be down for a mould, only if it had both the top nub and bottom neck hole. Pc'd yellow and a sharpie and you have shootable Lego's

Sent from my SM-G930V using Tapatalk

marlin39a
06-27-2019, 03:54 PM
I have interest in 10mm molds. I have no clue what you are suggesting.

nhyrum
06-27-2019, 03:55 PM
Whoops, forgot the photohttps://uploads.tapatalk-cdn.com/20190627/c32451d0cab447af1f6347be4b6db873.jpg

Sent from my SM-G930V using Tapatalk

Michael J. Spangler
06-27-2019, 11:04 PM
Make it in 38 or 45 and I’m in.

Littlewolf
07-02-2019, 05:03 PM
.358 and .452 besides .403

pjames32
07-04-2019, 12:35 PM
I'm interested in 40 cal.

thraxx
09-06-2019, 09:46 AM
I'd be in just for the novelty of it. I see it being a hollow base design.

I just saw an old lyman mold with a nose profile that looked almost exactly like the top of the head.

thraxx
11-26-2019, 10:00 AM
bump to top, to move this request next to the other one.

bowfin
12-10-2019, 03:41 PM
I would buy the .40 caliber version as that is the actual size of a Lego head. As a former tool & die guy, I was always very impressed that the Lego parts of thousands of different shapes and sizes always fit snug, but not to snug, with every other part made over the years. Figuring in shrinkage of parts and expansion of molds can be tricky to calculate.

ddixie884
12-15-2019, 11:40 PM
So kewlll...........

Michael J. Spangler
02-29-2020, 08:09 PM
Any luck with this one?

Lakehouse2012
03-01-2020, 11:15 AM
Any luck with this one?I drew it up and then got sidetracked... I will post tonight when I get back from shooting banquet.

Sent from my SM-A102U using Tapatalk

Michael J. Spangler
03-01-2020, 03:18 PM
Awesome!!
Thank you!

NYBushBro
03-02-2020, 04:19 PM
Pics!

Michael J. Spangler
03-06-2020, 12:04 PM
I drew it up and then got sidetracked... I will post tonight when I get back from shooting banquet.

Sent from my SM-A102U using Tapatalk

the suspense is killing me! If we made it hollow base/point they would actually snap into echother.... this seems like a hellion point to me but I guess the increased cost would make most people shy away especially for a novelty bullet to begin with

Lakehouse2012
03-08-2020, 10:08 PM
the suspense is killing me! If we made it hollow base/point they would actually snap into echother.... this seems like a hellion point to me but I guess the increased cost would make most people shy away especially for a novelty bullet to begin with

Alright, alright, here's what I've got so far.....

258272

258273

I've set it up as as HP from the nose for 40 and 10mm....

Depending on what the take-rate is, we can talk about if this should stay as a HP or just be a solid... I think a solid would be 99% as effective and just as much of a conversation starter...

Michael J. Spangler
03-08-2020, 10:46 PM
Alright, alright, here's what I've got so far.....

258272

258273

I've set it up as as HP from the nose for 40 and 10mm....

Depending on what the take-rate is, we can talk about if this should stay as a HP or just be a solid... I think a solid would be 99% as effective and just as much of a conversation starter...

I think solid would be fine.
What are the chances of this cherry being able to run for different diameters? 38/40/44/45?
I know the 40 was the original idea.
Powder coating these yellow and hand painting some smileys on them is going to be so much fun.

Lakehouse2012
03-08-2020, 10:54 PM
I think solid would be fine.
What are the chances of this cherry being able to run for different diameters? 38/40/44/45?
I know the 40 was the original idea.
Powder coating these yellow and hand painting some smileys on them is going to be so much fun.

I'm glad you are on board with the solid, will make the GB run so much faster... (2-years sucks)

If I setup the geometry correctly, Miha should be able to "wobble" in all the diameters from one cherry. I'll call him this week and make sure he is on board with my logic.

Michael J. Spangler
03-09-2020, 06:35 PM
I think that would be the best bet and allow the maximum amount of buyers.
I for one don’t shoot or own a 40 at all but if worse comes to worst I think I would buy a 2 cavity just to make legos for friends.

Lakehouse2012
03-12-2020, 12:28 PM
I agree with you, I'm the same, no 40's in my safe.

I can definitely create this in 9mm to start. However, Miha is going through some tough times right now, and has asked us not to list any new designs until he figures some things out on his end. I'm respecting that and so patiently waiting until he gives the green light.

So- when he's ready, I'll start this one in 9mm for sure. We can still post if interested on this thread, in preperation.


I think that would be the best bet and allow the maximum amount of buyers.
I for one don’t shoot or own a 40 at all but if worse comes to worst I think I would buy a 2 cavity just to make legos for friends.

jessdigs
03-19-2020, 12:06 AM
I would be interested in one for .40 and if a 9mm happens I'm in for that too. I would not care of it is Hp or solid as long as it looks like a Lego head.
The yellow with Smiley's would make me smile for sure.

Sent from my Pixel 4 XL using Tapatalk

skrapyard628
03-19-2020, 11:49 AM
Im in for a .40 version. Just seeing a little smiley face on a loaded cartridge would never fail to put a smile on my face too.

thraxx
03-19-2020, 12:45 PM
Alright, alright, here's what I've got so far.....

258272

258273

I've set it up as as HP from the nose for 40 and 10mm....

Depending on what the take-rate is, we can talk about if this should stay as a HP or just be a solid... I think a solid would be 99% as effective and just as much of a conversation starter...

I think you've got the hollow on the wrong end... the "peg" should be solid.

Littlewolf
03-19-2020, 05:22 PM
yes the peg would be the nose with the normally MPmolds hollow point pins now being hollow socket base. i'd be in for .312 , .358 , .403 , .452

Valley-Shooter
04-26-2020, 10:57 AM
I up for a solid 40 cal 2 cavity mould.
I'd prefer NOE as a manufacturer.

Sent from my Pixel 4 XL using Tapatalk

davek8s
04-27-2020, 07:53 PM
Iím in for 9mm and 45 on this one.


Sent from my iPhone using Tapatalk

jessdigs
09-07-2020, 03:34 AM
Any movement on this one?


Sent from my iPhone using Tapatalk Pro