PDA

View Full Version : MiHec Brass 360640 HP/ Aluminum 8 Cavity Solid ReRun



Wasalmonslayer
06-25-2019, 11:27 PM
MiHec 360640 Cramer HP in 2 cav or 4 cav hp or 6 cav solid brass or 8 cav solid aluminum.
This is a run of an earlier design produced by BRP. This will be a single crimp groove, cramer brass HP mold that is suitable for the 38 Special, 357 Magnum and other suitable caliber handguns with cylinders long enough to suit them. It will cast at 0.360". The original weight was about 140 gr as a hollow point, which is the only way i've shot it. The nose design is exactly like the 359640 as made by MiHec ahead of the crimp grooves. It is VERY accurate as can be attested to by several board members here in either design. A blank plug will provide that as well as a round and penta HP depending on what was wanted. The following is the discussion thread.
The Meplate to crimp groove distance is .340.

Below are the images of this bullet.
It cast around 155 as a solid.
This is a great bullet in many applications!
It fly's like a lazer in every gun I have shot it in. The only guns I have had an issue with getting it to fit is the N frame smiths with their short cylinders.....
Besides that gun it has been super in everything else 38 special/ 357 Mag/9mm heavy weight!
244154244155260348



Cramer HP 2 or 4 Cavity lube groove style all pins included GC or PB is now an option

6 Cavity Brass lube groove solid
8 Cavity Lee Style aluminum lube groove solid



all pins included by default.

prices:

2 Cavity HP: 95 euros including shipping, all pins, top punch and allen keys
4 Cavity HP: 135 euros including shipping, all pins, top punch and allen keys

6 Cavity Solid Brass: 95 euros including shipping, top punch and allen keys
8 Cavity Solid Aluminum lee style: 95 euros including shipping, top punch and allen keys
The conversion of Euro's to dollars will happen when Miha sends the invoice via PayPal.
GROUP BUY DISCOUNT OF 15% GIVEN AT TIME OF INVOICE

Please post your disguised email address and what mold you would like.

Wasalmonslayer
06-25-2019, 11:28 PM
Sign Up List -

Solid design
1)
2)
3)

HP design
1) mopedmedic AT hotmail DOT com - 2 Cav HP PB
2) Robert dot Davisson at Comcast dot net - 4 Cav HP GC
3) max at yvmarine dot com - 4 Cav HP GC
4)
5)

Lakehouse2012
06-26-2019, 07:28 PM
Bump, i have this mold and its fantastic for large revolver load fun!

Sent from my SM-G920V using Tapatalk

Wasalmonslayer
07-07-2019, 10:56 PM
Bumpski

Wasalmonslayer
07-27-2019, 02:10 PM
Bumpski

KVO
07-30-2019, 03:06 PM
Not much data on this bullet and it historically seems to have lost some press to its bigger double crimp groove brother, the 359-640. To set the record straight, this design is neck and neck for accuracy with the former. Also my most used 357 bullet.

Winchester 1892 @40 yd, 4x LER scope. 10 shot groups, load data on targets:
246011
246012
6" Dan Wesson, Ultradot @ 25yd, 6 shots:
246013

Wasalmonslayer
08-11-2019, 09:59 AM
Anyone have any interest in this one??

Wasalmonslayer
09-04-2019, 03:54 PM
Bump for a great design [smilie=s:

NYBushBro
09-25-2019, 09:00 PM
SIGN ME UP for a 2-cavity HP (w/ ALL pins - PENTA too!)

mopedmedic AT hotmail DOT com

PS: This HP is the equivalent of the "9MM HAMMER"!

Wasalmonslayer
09-27-2019, 03:58 PM
SIGN ME UP for a 2-cavity HP (w/ ALL pins - PENTA too!)

mopedmedic AT hotmail DOT com

PS: This HP is the equivalent of the "9MM HAMMER"!


You are added.

Thank You!

Wasalmonslayer
09-29-2019, 11:09 AM
Sunday rattle to the top

Wasalmonslayer
12-10-2019, 12:03 PM
Bumpski

hicard
01-10-2020, 08:35 PM
Any chance of getting one with gas checks.

Wasalmonslayer
01-12-2020, 01:25 PM
Any chance of getting one with gas checks.

If there was enough interest I am sure Miha would cut them.
Not sure if his current cherry cuts Gc or Pb. I will reach out this week to him and ask.

Wasalmonslayer
02-22-2020, 03:48 PM
Bump it

Wasalmonslayer
03-01-2020, 10:59 AM
Sunday bumpity

Wasalmonslayer
04-10-2020, 12:44 AM
Bumpski

Gofaaast
04-15-2020, 11:24 PM
I am interested and would sign up if a group buy is started.

Wasalmonslayer
04-15-2020, 11:49 PM
I am interested and would sign up if a group buy is started.

This is how group buys start.
We need so many to get rolling and this starts it as it moves forward it will go to an active buy once we hit 10 hollow point 4 Cavity commitments.

Thank you!

Ronic
04-16-2020, 09:01 PM
Well now that I have a new 586-8 on the way I guess I need this as well.

Robert dot Davisson at Comcast dot net 4 cav HP GC

Wasalmonslayer
05-04-2020, 09:14 AM
Well now that I have a new 586-8 on the way I guess I need this as well.

Robert dot Davisson at Comcast dot net 4 cav HP GC


You are added

Thanks

Wasalmonslayer
05-29-2020, 11:58 AM
Letís kick this one in the shorts boys super accurate and now an option of Gas Check thatís never been an option on these!

Ronic
06-21-2020, 10:15 AM
With this now having a gas check, I'm thinking this would be great in the 350 Legend.

Wasalmonslayer
06-22-2020, 10:04 PM
With this now having a gas check, I'm thinking this would be great in the 350 Legend.

I think you might be on to something here with use in the legend :)

rintinglen
06-23-2020, 03:16 PM
I have this in a 2 cavity and heartily endorse it for 38 Spl/357 revolvers, as well as the 357 Rossi 92. Mine is a plain base and I am contemplating getting one as a gas check HP.

Wasalmonslayer
06-30-2020, 09:49 AM
Now is the time :)

Billwnr
07-16-2020, 11:06 AM
I will take a 4 cavity HP Plain Base mould. sbwarner at nctv.com. Bill Warner

Wasalmonslayer
07-16-2020, 11:17 AM
I will take a 4 cavity HP Plain Base mould. sbwarner at nctv.com. Bill Warner


You are added sir

Thank you!

Billwnr
08-01-2020, 10:24 PM
Max, you can take me off this one. I signed up on the one that's in the active group buys. thanks, Bill

Wasalmonslayer
08-05-2020, 08:42 PM
Max, you can take me off this one. I signed up on the one that's in the active group buys. thanks, Bill

Done deal