Remmy4477
06-23-2019, 08:46 AM
Marlin 1894S in 44-40, Micro groove, .431 bore.
Our Lyman 427098 drops at .428, wheel weights, too small.
My Lyman 429421 drops at .431, this one feeds right through my 1894S in 44mag and is accurate in that rifle.
Made a few dummy rounds with the 429421 for the 44-40, they actually cycle fine through the action but you must coax them into the chamber with the lever as they seem to catch on the top? of the chamber, once started they go right in.
Factory ammo cycles right through it but again bullets are .427-.428.
Not certain I want to buy another mold or just get some from a boolit supplier?
Probably 200grn + ??
I like the NOE designs, the Lyman 427666, but hear the molds are hit and miss for diameters dropped.
Not much for Lee molds, me and aluminum molds do not work well together!
Just wondering what options and designs, boolit wise are out there?
Rifle will be used for 100 meter silhouette shoots.
Our Lyman 427098 drops at .428, wheel weights, too small.
My Lyman 429421 drops at .431, this one feeds right through my 1894S in 44mag and is accurate in that rifle.
Made a few dummy rounds with the 429421 for the 44-40, they actually cycle fine through the action but you must coax them into the chamber with the lever as they seem to catch on the top? of the chamber, once started they go right in.
Factory ammo cycles right through it but again bullets are .427-.428.
Not certain I want to buy another mold or just get some from a boolit supplier?
Probably 200grn + ??
I like the NOE designs, the Lyman 427666, but hear the molds are hit and miss for diameters dropped.
Not much for Lee molds, me and aluminum molds do not work well together!
Just wondering what options and designs, boolit wise are out there?
Rifle will be used for 100 meter silhouette shoots.