PDA

View Full Version : ACTIVE: MP 45-70 Plinker 212gr Solid



Lakehouse2012
06-04-2019, 11:12 PM
Last Call - on 14FEB2020

Here is a new 45.2.1 design in 45-70 he calls The Plinker. I will offer it in 0.462" diameter and can be sized down to 0.454". Bob has shot this for years "and it's very accurate...."

History Lesson - It was a practice bullet for the 4570 Trapdoors during the Indian wars in the West (along with all sorts of broken down Civil War pistol ammo. It is suitable for blackpowder also.

I think this one will be fun to take these big rifles out and shoot at the range all day, not something many of us do for more than an hour before hunting season starts... :)

- 4-cav Brass or 6-cav Aluminum mold (You choose)
- Casting at .462
- Flat or Bevel base (You choose)
- Steel sprue plate
- Allen keys are included
- RCBS/Lyman top punch is included
- Uses MP mold handles or LEE 6 cavity handles (NOT included but you can add for an +$20)
- Sample of sprue lube is included (15ml)

Lube groove casts 212gr with WW

242988

Prices are with shipping included, below.

- 4 Cavity Solid Brass - 95 Euro's (80,75 Euros with discount)
- 6 Cavity solid Aluminum - 95 Euro's (80,75 Euros with discount)


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Signup list

4-cav Brass mold
1) (brass410) - 4 cavity + handles, FB - leslee one four seven @ hotmail.com
2) (Rfeustel) - 4 cavity brass, plain base, with handles. R f e u s t e l AT a t t DOT n e t
3) (Petander) - 4-cav, FB, NLG mold, + handles - petander (at) gmail (dot) com
4) (LEVERGUN) - 4 cav, flat base, + handles - levergun one at gmail.com
5) (pettypace) - 4 cavity, brass, flat base. pettypace at geemaildotcom
6) (deputydog25) - 4 cav - sfsalyers at outlook dot com
7) (osteodoc08) - 4-cav, plain base - to m g a r cia 15 at ya hoo dot com
8) (415m3) - 4 cav, PB - LGKLA1 at the geeemail . com
9) (358wcf) - 4 cav, flat base - cvcooks52 AT gmail dot com
10 (CLaypool) - 4 cav, flat base - goodfarms1 at frontier dot com
11) (Kuato) - 4 cav,FB +handles - miamileo3 at yahoo dot com
12) (daengmei) - 4-cav Brass - maengdeidoo at hotmail dot com
13) (Iron Whittler) - Brass 4cav., flat base - rockyert68 at yahoo dot com
14) (Olevern) - 4 cav, FB - midimize at yahoo dot com
15) (JPD) - 4 cav brass, flat base, + handles. - pdevers At aol Dot com
16) (james23) - 4 cav, flat base - m dot c dot berry at SaskTel dot net shipping to Canada
17) (380AUTO) - 4 cav, flat base - jason f nine five three zero at yahoo dot com
18)
19)


6-cav aluminum mold
1) (Lakehouse2012) - 6-cav, BB - sorgatz aT ameritech d0t net (honcho mold)
2) (Nueces) - 6 cav, FB - mhkilgore att mac ddot kom
3) (mag44uk) - 6 cav, FB - mag 44 uk at yahoo dot com (Send direct to me in the UK please)
4) (Reverend Al) - 6 cav, FB - lapage at telus dot net
5) (Oily) - 6 cav, FB - jadepump at pldi dot net
6) (thraxx) - 6-cav, FB - vfluckey at midco dot net
7) (Mr Smith) 6-cav, Flat base - dsmithknives@hotmail.com
8) (reddhawkk) - 6-cav alum, FB + handles - eagle-rain AT cox DOT net
9) (kawacharles) - 6-Cav, Flat Base - kawacharles1973 at g mail dot com
10)
11) (doctorggg) - 6-cav alum, flat base - gggmmg at Verizon dot net.
12) (rancher1913) - 6 cavity alum, flat base - rancher1913atyahoodotcom
13) (ascast) - 6cav, Alum, BB - z55alive At frontiernet d0t net
14) (photomicftn) - 6-cav, aluminum, FB - photomicftn at gmail dot com
15) (Gunslinger1911) - 6 cav alum, FB - gnslgr1911 at yahoo dot com
16)
17)
18)

brass410
06-05-2019, 10:06 AM
I'm in leslee one four seven @ hotmail.com 4 cavity with handles bevel base

Lakehouse2012
06-05-2019, 11:28 AM
I'm in leslee one four seven @ hotmail.com 4 cavity with handles bevel baseThanks, you are first on the list!

Sent from my SM-G920V using Tapatalk

Lakehouse2012
06-05-2019, 11:21 PM
Putting myself on the list... :) This is one will be great for 45-70, 45 Colt, and I'm sure several others!

corbinace
06-06-2019, 02:58 AM
Could you clarify the diameter please?

Picture states .460 and text mentions .462.

Thank you.

Lakehouse2012
06-06-2019, 05:49 AM
Could you clarify the diameter please?

Picture states .460 and text mentions .462.

Thank you.Diameter will be .462

Sent from my SM-G920V using Tapatalk

corbinace
06-06-2019, 02:08 PM
Diameter will be .462

Sent from my SM-G920V using Tapatalk

Thank you Lakehouse2012.

Nueces
06-06-2019, 03:24 PM
Put me down for a 6 cavity aluminum with flat base

mhkilgore att mac ddot kom

Lakehouse2012
06-06-2019, 09:27 PM
Thanks Nueces, I've got you on the list.


Put me down for a 6 cavity aluminum with flat base

mhkilgore att mac ddot kom

mag44uk
06-12-2019, 04:11 PM
One 6 cavity aluminium flat base. mag 44 uk at yahoo dot com
Send direct to me in the UK please!

Lakehouse2012
06-12-2019, 07:02 PM
One 6 cavity aluminium flat base. mag 44 uk at yahoo dot com
Send direct to me in the UK please!

You've got it, your on the list! Thanks

Reverend Al
06-13-2019, 11:21 PM
OK, I'm in ... one 6 cavity aluminum with flat base please ...

lapage at telus dot net

Please note that I'm in Canada and will need "Special Shipping" via Post rather than DHL!

Thanks!

Lakehouse2012
06-14-2019, 12:48 AM
OK, I'm in ... one 6 cavity aluminum with flat base please ...

lapage at telus dot net

Yes Sir, you are on the list!

Oily
06-15-2019, 03:13 AM
One six cavity aluminum flat base jadepump at pldi dot net

Lakehouse2012
06-15-2019, 07:37 AM
One six cavity aluminum flat base jadepump at pldi dot netCool, ive got you on the list!

Sent from my SM-G920V using Tapatalk

Lakehouse2012
06-30-2019, 07:54 AM
Sunday bump, this would be a great coyote round or plinker at the range...

Sent from my SM-G920V using Tapatalk

Lakehouse2012
07-09-2019, 12:09 AM
Monday Bump

thraxx
07-09-2019, 08:21 AM
I'll take a 6-cav aluminum flat base, please - vfluckey at midco dot net

Lakehouse2012
07-09-2019, 08:31 AM
I'll take a 6-cav aluminum flat base, please - vfluckey at midco dot netThanks thraxx, ive got you on the list

Sent from my SM-G920V using Tapatalk

Lakehouse2012
07-17-2019, 12:24 AM
Who else wants to try this one!

no34570
07-24-2019, 07:05 PM
Can I ask,what mold handles fit the 6 cavity mold.?

no34570
07-24-2019, 07:10 PM
Sorry,did not see that Lee mold handles fit,am I bad:oops:

Lakehouse2012
07-24-2019, 08:20 PM
Can I ask,what mold handles fit the 6 cavity mold.?A picture is worth a 1000 words. [emoji16]

Ive modified the handles on all my MP molds, but these are his and work great for all 4,6 and 8-cav molds.https://uploads.tapatalk-cdn.com/20190725/4474800afd2cea0f49f34a37741511fa.jpg

Sent from my SM-G920V using Tapatalk

no34570
07-25-2019, 07:39 AM
Okay
Please put me down for a 6 cavity aluminum with flat base.
no34570 at gmail dot com
Thank you !

no34570
07-25-2019, 07:41 AM
A picture is worth a 1000 words. [emoji16]

Ive modified the handles on all my MP molds, but these are his and work great for all 4,6 and 8-cav molds.https://uploads.tapatalk-cdn.com/20190725/4474800afd2cea0f49f34a37741511fa.jpg

Sent from my SM-G920V using Tapatalk

Nice,look like good mold handles.

Lakehouse2012
07-25-2019, 07:55 AM
Okay
Please put me down for a 6 cavity aluminum with flat base.
no34570 at gmail dot com
Thank you !Thank you sir, ive got you on the list.

Sent from my SM-G920V using Tapatalk

Beagle333
08-07-2019, 06:52 PM
4 cav brass, flat base, please. [smilie=s:
shutupandjump at yahoo dot com


Changed mind.... please swap to 6-cav aluminum, flat base. Thanks.
Will send PM about it.

Lakehouse2012
08-08-2019, 10:21 AM
4 cav brass, flat base, please. [smilie=s:
shutupandjump at yahoo dot comSorry for the delay sir, ive updated you on the list.

Thanks,

Sent from my SM-G920V using Tapatalk

reddhawkk
08-16-2019, 08:56 PM
Put me in for a 6-cavity aluminum flat base with handles; eagle-rain AT cox DOT net

Lakehouse2012
08-17-2019, 07:06 PM
Put me in for a 6-cavity aluminum flat base with handles; eagle-rain AT cox DOT net

Thanks Redhawk, I've added you to the list.

Lakehouse2012
08-19-2019, 11:31 PM
This one is going to Active, per Miha's direction. Lets see how many we can get!

brass410
08-20-2019, 09:30 AM
can you change me from bevel base to flat base please I'm number one on the 1st list sorry bout that I haven't a clue as to what I was thinking.

Lakehouse2012
08-20-2019, 10:42 AM
can you change me from bevel base to flat base please I'm number one on the 1st list sorry bout that I haven't a clue as to what I was thinking.No problem, got you fixed up

Sent from my SM-G920V using Tapatalk

Lakehouse2012
09-12-2019, 07:49 AM
Miha will only be shipping via DHL from now on and i think no more invoicing, rather youll be notified the order is ready and you purchase (similar pay methods) on his website.

This is going to be a HUGE time saver for

Sent from my SM-G920V using Tapatalk

Petander
09-12-2019, 12:31 PM
Interesting.

Is a No Lube Groove -version possible?

Lakehouse2012
09-12-2019, 02:39 PM
Interesting.

Is a No Lube Groove -version possible?Absolutely, sign up

Sent from my SM-G920V using Tapatalk

Petander
09-12-2019, 03:08 PM
Great,

I'd like a brass 4-cavity flat base No-Lube-Groove mold plus Mihec handles.

petander (at) gmail (dot) com thank you

Lakehouse2012
09-12-2019, 09:41 PM
Thanks you are on the list!


Great,

I'd like a brass 4-cavity flat base No-Lube-Groove mold plus Mihec handles.

petander (at) gmail (dot) com thank you

Reverend Al
10-02-2019, 03:43 PM
Miha will only be shipping via DHL from now on ...

Dang! That is some bad news for those of us out of country (Canada in my case). Courier services absolutely rape us at the border for any imports. Without asking your permission they automatically send your package to their own company's "brokerage" firm and then charge you excessive fees to clear a parcel that would come to your door via Post with a minimal $10 "small package" import fee. The courier service might charge from $50 to $100 to "import" you parcel and if you don't pay the fees when they arrive at your door they won't give you the parcel. Domestic deliveries aren't a problem ... they only do this on imported goods. I sure hope that they will still allow the option of Post for out of country deliveries ...

:mad:

LEVERGUN
10-21-2019, 09:22 AM
sign me up for 4 cavity, flat base, with handles, brass
levergun
one
at gmail.com

Lakehouse2012
10-21-2019, 02:24 PM
sign me up for 4 cavity, flat base, with handles, brass
levergun
one
at gmail.comIve got you on the list, thankyou!

Sent from my SM-G920V using Tapatalk

Lakehouse2012
10-21-2019, 02:26 PM
Dang! That is some bad news for those of us out of country (Canada in my case). Courier services absolutely rape us at the border for any imports. Without asking your permission they automatically send your package to their own company's "brokerage" firm and then charge you excessive fees to clear a parcel that would come to your door via Post with a minimal $10 "small package" import fee. The courier service might charge from $50 to $100 to "import" you parcel and if you don't pay the fees when they arrive at your door they won't give you the parcel. Domestic deliveries aren't a problem ... they only do this on imported goods. I sure hope that they will still allow the option of Post for out of country deliveries ...

:mad:Im not really sure how to respond to this email other than to hope Miha reads and responds for all our friends in Canada.

@MiHec

Sent from my SM-G920V using Tapatalk

Stig
10-25-2019, 04:54 AM
Would be very interested in this mould if you ship internationally? I live in Norway

Best wishes
Stig

Gamsek
10-25-2019, 04:59 AM
Would be very interested in this mould if you ship internationally? I live in Norway

Best wishes
Stig

He does. He is from Slovenia/EU and he ships worldwide, now preferably with DHL service (very fast).

MiHec
10-25-2019, 06:31 AM
Dang! That is some bad news for those of us out of country (Canada in my case). Courier services absolutely rape us at the border for any imports. Without asking your permission they automatically send your package to their own company's "brokerage" firm and then charge you excessive fees to clear a parcel that would come to your door via Post with a minimal $10 "small package" import fee. The courier service might charge from $50 to $100 to "import" you parcel and if you don't pay the fees when they arrive at your door they won't give you the parcel. Domestic deliveries aren't a problem ... they only do this on imported goods. I sure hope that they will still allow the option of Post for out of country deliveries ...

:mad:

When you join GB, make sure that you state that you are from Canada (or from country with similar "problem") and I will make "special" shipping

Lakehouse2012
10-25-2019, 06:40 AM
Would be very interested in this mould if you ship internationally? I live in Norway

Best wishes
StigSure do Stig, post what you want.

Sent from my SM-G920V using Tapatalk

Stig
10-26-2019, 01:25 AM
Sure do Stig, post what you want.

Sent from my SM-G920V using Tapatalk

Excellent! Could you put me down for a 4-cavity, flat base, brass mould, please?

gits1972 at gmail dot com

Lakehouse2012
10-26-2019, 08:27 AM
Excellent! Could you put me down for a 4-cavity, flat base, brass mould, please?

gits1972 at gmail dot comYes sir Mr Stig, ive got you on the list!



Sent from my SM-G920V using Tapatalk

no34570
10-28-2019, 08:22 PM
Lakehouse2012
Can you put on my order please,Shipping to Australia so that Mihec knows
I am #7 in the 6 cavity aluminium mould.
Thanks mate.

Lakehouse2012
10-28-2019, 09:03 PM
Lakehouse2012
Can you put on my order please,Shipping to Australia so that Mihec knows
I am #7 in the 6 cavity aluminium mould.
Thanks mate.

Yes Sir, I've updated you!

Kawacharles
11-07-2019, 04:01 PM
Please put me on the list: 6-Cavity Flat Base Aluminium

kawacharles1973 at g mail dot com

tdoor4570
11-07-2019, 04:09 PM
Don't understand Euros how much are the molds in dollars

Lakehouse2012
11-07-2019, 04:12 PM
Please put me on the list: 6-Cavity Flat Base Aluminium kawacharles1973 at g mail dot comThanks Sir, your on the list

Sent from my SM-G920V using Tapatalk

Lakehouse2012
11-07-2019, 04:15 PM
Don't understand Euros how much are the molds in dollarsIts a moving target, right now 81 euros is about 90 USD

Sent from my SM-G920V using Tapatalk

Reverend Al
11-11-2019, 08:18 PM
When you join GB, make sure that you state that you are from Canada (or from country with similar "problem") and I will make "special" shipping

Awesome! Thank you Sir!

DeputyDog25
11-14-2019, 09:11 AM
Please put me down for a 4 cavity brass.
sfsalyers at outlook dot com

Lakehouse2012
11-14-2019, 11:55 AM
Please put me down for a 4 cavity brass.
sfsalyers at outlook dot comIve got you on the list, thanks.

Sent from my SM-G920V using Tapatalk

BLACKOUT
11-24-2019, 09:24 PM
Ive got you on the list, thanks.

Sent from my SM-G920V using Tapatalk

Is it too late to add my order and when do you need the money?

Wots
11-24-2019, 10:34 PM
Looking for load data source for for this 45-70 212gr.
Thanks!

Lakehouse2012
11-24-2019, 11:21 PM
Is it too late to add my order and when do you need the money?

Blackout, you are fine on the timing.

Post if you want 4 or 6 cavity and flat or bevel base, and put a disguised email on here. I'll get you added to the list. When the group buy molds get built, Miha will send you an email directly, to pay him through Paypal.

Thanks,

Lakehouse2012
11-24-2019, 11:27 PM
Looking for load data source for for this 45-70 212gr.
Thanks!

I see Accurate and Hodgden have data for 250g, and I only spent a few min looking. I'm certain there are plenty of loads out there, and some of it will have to be safe development of the loads.

BLACKOUT
11-24-2019, 11:47 PM
Make it a six cavity aluminum flat base.
blackout @ bflood@cox.net

Lakehouse2012
11-25-2019, 12:25 AM
Make it a six cavity aluminum flat base.
blackout @ bflood@cox.netYes sir, you are on the list.

Sent from my SM-G920V using Tapatalk

Wots
11-25-2019, 11:01 AM
Ahh so using the 250 g data is a good starting point for a 212 g?

osteodoc08
11-26-2019, 06:30 PM
Four cavity plain base

to m g a r cia 15 at ya hoo dot com

Lakehouse2012
11-26-2019, 08:25 PM
Four cavity plain base

to m g a r cia 15 at ya hoo dot comThanks, ive got you on the list.

Sent from my SM-G920V using Tapatalk

415m3
11-26-2019, 08:42 PM
Shot my Trapdoor for the first time today....put me in for the plinker!

4 cav PB brass please

LGKLA1 at the geeemail . com

Lakehouse2012
11-26-2019, 10:23 PM
Shot my Trapdoor for the first time today....put me in for the plinker!

4 cav PB brass please

LGKLA1 at the geeemail . com

Yes Sir, I've got you on the list!

This one is building steam fast, a few more and this one will go into last call!

Reverend Al
11-27-2019, 05:58 PM
Yes Sir, I've got you on the list!

This one is building steam fast, a few more and this one will go into last call!

Woo Hoo!

[smilie=w:

358wcf
11-29-2019, 07:58 PM
Kindly add me to the list, please: 4 cav brass mold, flat base-- just the thing for FUN! cvcooks52 AT gmail dot com many thanks!

Lakehouse2012
11-29-2019, 11:54 PM
Kindly add me to the list, please: 4 cav brass mold, flat base-- just the thing for FUN! cvcooks52 AT gmail dot com many thanks!

Yes Sir, you are on the list.

doctorggg
12-11-2019, 03:13 PM
I'll take a 6-cav aluminum flat base, please - gggmmg at Verizon dot net. Thanks

longbow
12-11-2019, 10:49 PM
Not sure why I am reading this thread since I don't have a .45-70 anymore (yes, I know, I should have one and may again).

I see comments about looking for load data. The Lyman Ideal handbook #40 has load data for this very boolit:

http://www.goodrichfamilyassoc.org/44_Special_Articles/Lyman%20Ideal%20%2340-1955.pdf

Well, a load anyway.

longbow

Lakehouse2012
12-12-2019, 04:20 PM
I'll take a 6-cav aluminum flat base, please - gggmmg at Verizon dot net. ThanksIve got you on the list, thanks

Sent from my SM-G920V using Tapatalk

Lakehouse2012
12-12-2019, 04:21 PM
@MiHec

Miha, this order has 20 solids and is now in last call.

Sent from my SM-G920V using Tapatalk

CLAYPOOL
12-14-2019, 02:35 AM
Johnboy at fake net. 4 cavity brass flat base....

Lakehouse2012
12-14-2019, 07:24 AM
Johnboy at fake net. 4 cavity brass flat base....Thanks, ive added you

Sent from my SM-G920V using Tapatalk

fgd135
12-16-2019, 01:30 PM
Whoa, sounds fun!
If not too late for last call--I'd like a brass 4 cavity flat base.
dave dot 304 at tdsmail dot com

Thanks!

Lakehouse2012
12-16-2019, 04:15 PM
Whoa, sounds fun!
If not too late for last call--I'd like a brass 4 cavity flat base.
dave dot 304 at tdsmail dot com

Thanks!Thanks, you are on the list

Sent from my SM-G920V using Tapatalk

Lakehouse2012
01-07-2020, 12:09 AM
This one has 22 orders on a solid, it could also be moved up in line, once the cherry is made.

Only 3 more gets Last Call

big bore nut
02-12-2020, 01:52 PM
greggoryashley at yahoo dot com 1 6 cavity aluminum PB

alamogunr
02-12-2020, 03:25 PM
I'll take one-6 Cavity solid Aluminum
alamogunr AT charter DOT net

Reverend Al
02-12-2020, 04:14 PM
Are we getting close to production on this one yet?

Lakehouse2012
02-12-2020, 08:32 PM
greggoryashley at yahoo dot com 1 6 cavity aluminum PB

Thanks, I've added you to the list!

Lakehouse2012
02-12-2020, 08:34 PM
Thanks John, I've got you on the list!

I'll take one-6 Cavity solid Aluminum
alamogunr AT charter DOT net

Lakehouse2012
02-12-2020, 08:35 PM
Are we getting close to production on this one yet?

Wow, this one got a shot-in-the arm today, we need 1 more order to put this into last call, it's close(r) now.

daengmei
02-14-2020, 07:38 PM
4-cav Brass mold, 1 please
maengdei at Hotmail dot com

Lakehouse2012
02-14-2020, 11:49 PM
Thanks daengmei! You make 25, so going into Last Call!!!


4-cav Brass mold, 1 please
maengdei at Hotmail dot com

Lakehouse2012
02-14-2020, 11:51 PM
@MiHec this one is now in Last Call.

Sent from my SM-A102U using Tapatalk

BLACKOUT
03-24-2020, 08:40 PM
What would be a good powder for these, I will be shooting out of CVA hunter- 24" barrel?

Beagle333
03-24-2020, 09:47 PM
Hooray!!!

Reverend Al
03-25-2020, 02:26 AM
Good news ... been patiently waiting for this one to happen ...

:drinks:

CLAYPOOL
03-25-2020, 10:25 PM
# 10 on the 4 cavity brass should read as follows; goodfarms1 at frontier dot com for the address you want sorry about that. I got straightened out on the hornet bullet listing...

alamogunr
03-25-2020, 11:53 PM
Please remove me from the list. (alamogunr) - 6 Cav Alum - alamogunr AT charter DOT net

I've got too many things going on right now and not enough time to work with another mold.

Thanks, John

BLACKOUT
03-27-2020, 11:24 PM
Do we know when the order for these will be summited?

Lakehouse2012
03-29-2020, 09:57 AM
# 10 on the 4 cavity brass should read as follows; goodfarms1 at frontier dot com for the address you want sorry about that. I got straightened out on the hornet bullet listing...

I've modified your email


Please remove me from the list. (alamogunr) - 6 Cav Alum - alamogunr AT charter DOT net

I've got too many things going on right now and not enough time to work with another mold.

Thanks, John

John, no problem, I've removed you


Do we know when the order for these will be summited?

Blackout, no not exactly, but being its in last call and a solid, would lean towards a month or so

BLACKOUT
03-29-2020, 11:22 AM
Okay thank you!

Reverend Al
04-26-2020, 07:01 PM
Is this mould in production yet, or just in "last call"?

Lakehouse2012
04-27-2020, 04:13 PM
Is this mould in production yet, or just in "last call"?It's in last call. Miha has been notified and he is working on getting it made.

Sent from my SM-A102U using Tapatalk

BLACKOUT
05-09-2020, 11:00 AM
How's the progress on these molds?

Lakehouse2012
05-09-2020, 12:16 PM
How's the progress on these molds?I've been asking Miha, so far no finish date. I will assume it's at least a month out.

Sent from my SM-A102U using Tapatalk

BLACKOUT
05-10-2020, 12:06 AM
Okay, just looking forward to trying them out!

Reverend Al
05-27-2020, 06:54 PM
Just finished casting some Lee 405 grain hollow base boolits today ... could have cast twice as many if I had my new 212 grain mould ... and faster since the Lee is single cavity ...

[smilie=l:

Iron Whittler
05-27-2020, 08:56 PM
I'll take ONE, Brass 4cav., flat base. rockyert68 at yahoo dot com. Iron Whittler :Fire:

Lakehouse2012
05-27-2020, 10:05 PM
I've added you Iron, thank you!

Reverand - I hear ya!!! Would be nice to have this sooner than later. Miha is dealing with a very serious event.




I'll take ONE, Brass 4cav., flat base. rockyert68 at yahoo dot com. Iron Whittler :Fire:


Just finished casting some Lee 405 grain hollow base boolits today ... could have cast twice as many if I had my new 212 grain mould ... and faster since the Lee is single cavity ...

[smilie=l:

Wots
05-31-2020, 10:18 PM
I know I'll regret it if I don't get it.

4 cavity, bevel base with handles

Wots9099 At gmail dot com

Lakehouse2012
06-01-2020, 08:00 AM
Thanks Sir, I've got you on the list!

We will be in last call now with 26 molds!


I know I'll regret it if I don't get it.

4 cavity, bevel base with handles

Wots9099 At gmail dot com

JPD
06-15-2020, 02:10 AM
If possible, please put me in for:

A 4 cavity brass, flat base, and a set of handles.

pdevers At aol Dot com

Thank you sir.

Lakehouse2012
06-16-2020, 03:34 PM
Absolutely, I've added you onto the list!

Thanks!



If possible, please put me in for:

A 4 cavity brass, flat base, and a set of handles.

pdevers At aol Dot com

Thank you sir.

fgd135
06-21-2020, 05:13 PM
Any more info on when this might happen?

ascast
06-21-2020, 05:21 PM
is this order closed as of now?

ascast
06-21-2020, 05:23 PM
if not closed, put me in for a Aluminum, 6cav, bevel base z55alive@frontiernet.net

Lakehouse2012
06-22-2020, 03:23 PM
if not closed, put me in for a Aluminum, 6cav, bevel base z55alive@frontiernet.net

Thanks, I've added you to the list!

Lakehouse2012
06-22-2020, 03:27 PM
Any more info on when this might happen?

We have 28 molds on order now, Miha should be cutting cavities pretty quick. I just tried calling him but no answer. Europe does a lot of "holiday" time in the summer months, so we just have to be patient... :)

BLACKOUT
06-22-2020, 05:50 PM
Okay thank you for the update ! I looking forward to trying these out!

james23
07-02-2020, 11:07 PM
I will take one aluminum , flat base for m dot c dot berry at SaskTel dot net shipped to Canada thanks

Lakehouse2012
07-05-2020, 11:08 PM
Thanks James,

I've got you on the list. Should start moving soon!

I will take one aluminum , flat base for m dot c dot berry at SaskTel dot net shipped to Canada thanks

photomicftn
07-17-2020, 11:13 AM
I'll take a 6-cavity, aluminum, FB

photomicftn at gmail dot com

Thank you

Lakehouse2012
07-17-2020, 03:21 PM
Excellent, I've added you to the list!

Thanks,


I'll take a 6-cavity, aluminum, FB

photomicftn at gmail dot com

Thank you

Gunslinger1911
07-17-2020, 08:22 PM
I gotta quit coming to this folder !!!!!!!!!!!

6 cav alum, flat base please

gnslgr1911 at yahoo dot com

Lakehouse2012
07-17-2020, 11:12 PM
LOL - I like you coming to this folder, dont stop.... :)

Thanks, I've added you to the GB.



I gotta quit coming to this folder !!!!!!!!!!!

6 cav alum, flat base please

gnslgr1911 at yahoo dot com

45 hunter
07-18-2020, 03:13 PM
How are molds coming along?

Lakehouse2012
07-20-2020, 07:02 AM
I have a status request into Miha, waiting for feedback...

Sent from my SM-A102U using Tapatalk

45 hunter
07-20-2020, 12:36 PM
Okay thank you!

photomicftn
08-03-2020, 05:09 PM
I know I'm a late joiner, but I was waiting to hear too . . .



I have a status request into Miha, waiting for feedback...

Sent from my SM-A102U using Tapatalk

Lakehouse2012
08-03-2020, 09:09 PM
I know I'm a late joiner, but I was waiting to hear too . . .

I spoke with Miha today, Europe does Holiday from July-mid August, but he is telling me that very quickly he is going to clear the log-jam. I'm putting an email together tonight with a list of all the molds that need delivery, this one is VERY close.

45 hunter
08-05-2020, 10:05 AM
Awesome, thanks for the update!

joatmon
08-09-2020, 04:07 PM
About how much in dollars is this.
Thanks Aaron

Lakehouse2012
08-09-2020, 11:55 PM
About how much in dollars is this.
Thanks Aaron

Aaron,

This is a ball-park only, the value of the US dollar to Euro changes daily, but right now it's $93 UDS plus shipping, but minus any discount Miha would give because its a group buy.

I hope this helps,

Lakehouse

45 hunter
08-26-2020, 08:54 PM
How is the progress on these molds?

Lakehouse2012
08-27-2020, 11:20 AM
How is the progress on these molds?

Hi 45,

I am waiting for an update from Miha. I thought they came back from Holiday last week but he might be taking more time due to Covid. I will update folks as soon as I hear back from him, promise.

Thanks,

Lakehouse2012

photomicftn
09-10-2020, 11:18 AM
Have you heard anything new on this buy?

I’ve bought three molds from Miha since the last update, and all were posted the day after I paid, so I can report they’re still alive over there in Slovenia;-)


Hi 45,

I am waiting for an update from Miha. I thought they came back from Holiday last week but he might be taking more time due to Covid. I will update folks as soon as I hear back from him, promise.

Thanks,

Lakehouse2012

Lakehouse2012
09-10-2020, 10:05 PM
No Sir, I'm sorry I dont have any update from Miha. I agree that someone is shipping off-the-shelf molds out his door, but there has been no feedback on the GB's. I'm going to call him at my 12am EST (his 6am) before I go to bed tonight. Sometimes I have better luck with the call. Fingers crossed...



Have you heard anything new on this buy?

I’ve bought three molds from Miha since the last update, and all were posted the day after I paid, so I can report they’re still alive over there in Slovenia;-)

Lakehouse2012
09-11-2020, 01:11 AM
Talked with Miha tonight. Hes REALLY busy, but this GB is nearing close. Several weeks it will get put into closed status, in case you are still sitting on the fence.

no34570
09-11-2020, 01:39 AM
Lakehouse2012
I am #7 in the 6 cavity mold,sorry have to pull out,all money is going towards my repayments on my loan,so sorry :(

Lakehouse2012
09-11-2020, 09:17 AM
Lakehouse2012
I am #7 in the 6 cavity mold,sorry have to pull out,all money is going towards my repayments on my loan,so sorry :(

No problem, I've removed you.

380AUTO
09-11-2020, 09:29 AM
Is it too late to add my name to the list?

If so I would like a 4 cavity brass flat base

jason f nine five three zero at yahoo dot com

Lakehouse2012
09-11-2020, 10:40 AM
No problem, I've added you onto the list.

Thanks


Is it too late to add my name to the list?

If so I would like a 4 cavity brass flat base

jason f nine five three zero at yahoo dot com

photomicftn
09-11-2020, 11:21 AM
Talked with Miha tonight. Hes REALLY busy, but this GB is nearing close. Several weeks it will get put into closed status, in case you are still sitting on the fence.

Thanks for the update.

legendhunter
10-01-2020, 06:03 PM
Just checking to see if there has been any progress. Thank you!

Lakehouse2012
10-02-2020, 08:50 PM
Just checking to see if there has been any progress. Thank you!I cant report anything new, but I'm confident that Miha is working on this and will be shipping soon...

Sent from my SM-A102U using Tapatalk

legendhunter
11-02-2020, 06:31 PM
Are we getting any closer?

Mr Smith
11-03-2020, 06:54 PM
Am I to Late? If not. I would like an Aluminum, Six cavity, Flat base. dsmithknives@hotmail.com

Lakehouse2012
11-03-2020, 08:03 PM
Am I to Late? If not. I would like an Aluminum, Six cavity, Flat base. dsmithknives@hotmail.com

Hi, I've put you in slot #7 of the 6-cav.

Thank you!!

Lakehouse2012

Mr Smith
11-04-2020, 02:33 PM
When will I need to pay for the mold?

Lakehouse2012
11-05-2020, 01:36 AM
When will I need to pay for the mold?

MP molds (Miha) will send you an email, which says you to pay a specific amount for the mold. You will know specifically when he writes :)

daengmei
11-22-2020, 12:29 PM
could you update my email address, it's now maengdeidoo at hotmail dot com

Wots
11-22-2020, 12:51 PM
Lakehouse2012
I am #14 in the 4-cav Brass mold. Please take me off the buy.
Thanks

Lakehouse2012
11-22-2020, 09:01 PM
Lakehouse2012
I am #14 in the 4-cav Brass mold. Please take me off the buy.
Thanks


could you update my email address, it's now maengdeidoo at hotmail dot com

Daengimei- I've updated your email

Wot- I've removed you from the GB

Olevern
12-01-2020, 02:51 PM
I would like a brass 4 cav. if not too late.
thanks,vern

midimize at wildblue dot net

Oh, flat base if you will

Lakehouse2012
12-01-2020, 04:03 PM
I would like a brass 4 cav. if not too late.
thanks,vern

Hi Vern, absolutely. Will you just edit your post and add a disguised email on there please.

Olevern
12-01-2020, 06:09 PM
done, thanks
vern

Lakehouse2012
12-01-2020, 09:30 PM
Thanks, I put you in spot #14 of the 4-cav with a FB


done, thanks
vern

fgd135
12-15-2020, 05:18 PM
Please remove me from the wait list. Thanks!

Lakehouse2012
12-15-2020, 11:32 PM
Please remove me from the wait list. Thanks!

Ok, you are off the list. Wishing you a Merry Christmas!

Olevern
12-16-2020, 07:21 AM
Lakehouse, if you have a means of communicating with MP, I wonder if you could ask him if he could make me new pins (blank and hollow point) for my MP brass mold #MP 252 44. I lost the pin kit in a fire, but the mold wasn't stored in the same place so now have a unusable mold with no pins. Thanks,
Olevern

Beagle333
12-18-2020, 09:46 PM
Not sure it'll ever happen.

273510

Lakehouse2012
12-19-2020, 06:33 PM
Hi Olevern,

I did text him the day you wrote this, but haven't gotten any reply.


Lakehouse, if you have a means of communicating with MP, I wonder if you could ask him if he could make me new pins (blank and hollow point) for my MP brass mold #MP 252 44. I lost the pin kit in a fire, but the mold wasn't stored in the same place so now have a unusable mold with no pins. Thanks,
Olevern

Beagle333 - LOL hopefully he's not leaving any of us at the alter...


Not sure it'll ever happen.

273510

Olevern
12-19-2020, 08:59 PM
Thanks, Lakehouse, I'm sure he will respond in due time

Gunslinger1911
12-20-2020, 03:32 PM
Waiting for the best is nerve wracking !!!! But worth it !!!!!

CLAYPOOL
12-20-2020, 11:02 PM
I am hoping we have a merry "MIHA CHRISTMAS".......

Pirate69
12-26-2020, 04:57 PM
How do you think this mold would work with a 458 Win Mag?

Lakehouse2012
12-26-2020, 07:22 PM
How do you think this mold would work with a 458 Win Mag?

Sorry Pirate, I dont own any 458 win mag, so I wont be helpful, but I'm sure there are several folks on here that will chime in.

legendhunter
01-18-2021, 01:30 PM
Please remove my name from the list, blackout, bflood at cox Dot net. I found the same bullet mold from a US company in a 224gr. and there in stock !

Lakehouse2012
01-18-2021, 01:36 PM
Please remove my name from the list, blackout, bflood at cox Dot net. I found the same bullet mold from a US company in a 224gr. and there in stock !

You are removed from the list, thanks.

legendhunter
01-18-2021, 01:42 PM
Thank you!

big bore nut
02-05-2021, 04:06 PM
Please take me off the list.

Lakehouse2012
02-05-2021, 05:25 PM
I've updated you.


Please take me off the list.

Mr Smith
04-13-2021, 05:47 PM
Dang, I just turned 70 the other day. Hope I dont die before we get this mold.

415m3
06-06-2021, 12:38 AM
Well, we hit the 2 year mark. Surely that’s a record?

Lakehouse2012
06-06-2021, 01:03 AM
I know guys, these GB's arent moving as fast as we would like, Miha is having his share of problems getting bodies to do the work and materials. All I can ask is that we remain patient. This one has a lot of orders and will get cut, I'm REALLY wanting this one to run also, for my 45-70...


Dang, I just turned 70 the other day. Hope I dont die before we get this mold.


Well, we hit the 2 year mark. Surely that’s a record?

rancher1913
06-06-2021, 09:13 AM
Put me down for a 6 cavity aluminum with flat base, hopefully it gets run before another year passes

rancher1913atyahoodotcom

Lakehouse2012
06-06-2021, 01:08 PM
I put you on slot #12 of the 6-cav.

Agreed, fingers crossed


Put me down for a 6 cavity aluminum with flat base, hopefully it gets run before another year passes

rancher1913atyahoodotcom

Kuato
08-02-2021, 11:16 PM
I know it's kinda late, but can I jump in on this deal?

Olevern
08-03-2021, 08:34 PM
can you change my email address to midimize at yahoo dot com?

Lakehouse2012
08-03-2021, 11:47 PM
I know it's kinda late, but can I jump in on this deal?

Absolutely! Just post the details of what you wat here and I'll add you.

Lakehouse2012
08-03-2021, 11:48 PM
can you change my email address to midimize at yahoo dot com?

Yes Sir, I've got you updated on this one as well. Thanks!

Lakehouse2012
08-03-2021, 11:49 PM
NOTE----- I REALLY hope this one runs soon!!! I need some tack-time on the carbine...

Kuato
08-04-2021, 12:21 AM
Great!
I'm in for a 4 cav fb + handles

miamileo3 at yahoo dot com

Thanks!

Lakehouse2012
08-04-2021, 11:35 PM
Thanks, I've got you in slot #11


Great!
I'm in for a 4 cav fb + handles

miamileo3 at yahoo dot com

Thanks!

Stig
09-16-2021, 03:35 AM
Could I please be removed from the list? I have sourced a mold elsewhere.

gits1972@gmail.com

pettypace
09-16-2021, 06:35 AM
I'll take one: 4 cavity, brass, flat base. pettypace at geemaildotcom

Lakehouse2012
09-16-2021, 11:33 AM
Hi Stig, I've removed you from the list.

Pettypace - I've added you into spot #5 where Stig was. Thank you!


Could I please be removed from the list? I have sourced a mold elsewhere.

gits1972@gmail.com


I'll take one: 4 cavity, brass, flat base. pettypace at geemaildotcom

Beagle333
09-16-2021, 11:49 AM
4-cav Brass mold
2) (beagle333) - 4 cav brass, flat base, shutupandjump at yahoo dot com

Please remove me from this buy. Thank you.

Lakehouse2012
09-16-2021, 11:52 AM
4-cav Brass mold
2) (beagle333) - 4 cav brass, flat base, shutupandjump at yahoo dot com

Please remove me from this buy. Thank you.

I've removed you from the list, thanks!

Mr Smith
09-25-2021, 11:57 AM
So what's up with this? Gonna happen, or not?

Lakehouse2012
09-29-2021, 12:26 AM
So what's up with this? Gonna happen, or not?

All of Miha's Group Buys will definitely "happen". It's a matter of when. He's busy, there are material shortages, labor issues and the problems seems universal. I know we all want these molds for hunting season, I'm doing all I can to push for them to close and ship.

Rfeustel
01-25-2022, 02:43 AM
Hi, I didn’t see a close post. If still open, please put me down for a 4 cavity brass, plain base, with handles. R f e u s t e l AT a t t DOT n e t

Lakehouse2012
01-26-2022, 12:59 AM
Hi Rfeustel,

Now I understand your PM to me. I have added you onto this GB, you are all set. Miha will send you an email when he is ready to ship these molds. I dont have a date at this time, but we are hopeful it will be soon. You are in spot #2


Hi, I didn’t see a close post. If still open, please put me down for a 4 cavity brass, plain base, with handles. R f e u s t e l AT a t t DOT n e t

380AUTO
02-12-2022, 08:18 PM
Still looking forward to this one.