PDA

View Full Version : ReRun - Mihec 359640 158gr HP or 170gr Solid Dual Crimp Groove



Pages : [1] 2

Lakehouse2012
05-22-2019, 11:19 PM
LAST Call on 03AUG2020

MiHec 359640 Cramer HP in 2 or 4-cav HP or 6-cav solid brass or 8-cav solid aluminum.

Here is the original GB done by the Designer, Bob (45.2.1) http://castboolits.gunloads.com/showthread.php?58932-359640PB-HP-45-2-1-Design-Group-Buy-INTERESTED

With Miha's permission and a big Thanks to the original designer 45.2.1 we are going to run this group buy again. This is has been run 5 times and everyone has raved about this bullet!!
It shoots well in everything I have ever shot it in from my N frame to my SP101 and my lever guns. This is a very accurate and great one bullet, for all occasions mold!!!

This is a dual use 357 boolit, the top crimp groove is for the short N-frame S&W 357 cylinders and the bottom crimp groove is for the 38 Special and long 357 Mag cylinder wheel guns. Meplat to crimp groove is 0.318-in and 0.357-in.” Weight is approximately 158gr HP and 170gr solid. I have a solid version of this mold and it casts 0.359-in with WW and 2% tin. Standard Lee 6 cavity handles will work. Miha also offers his higher quality handles too that can be added to the order.

Here is a little eye candy to look at from past runs.

This buy is going to offered in -

242269

Cramer Pins included: 1) Large HP, 2) Penta HP, 3) Small HP, 4) Cup HP, 5) Blank pin for flat nose

- 2 Cavity HP all pins included 95 Euro's (80,75 with discount)

- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)

- 6 Cavity solid Brass 95 Euro's (80,75 with discount)

- 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)

The above prices include discount!

If there is interest in Hi Tek design we can do that too we will leave it up to demand.

The price will be converted to dollars at the time of invoicing thru paypal and the discount will be applied then.
If you do not do paypal contact Miha directly and he will work out the details with you.


This buy is set up to go into last call at 20 molds and then it will close when Miha calls it. These runs take a while some times and patience is required he has done a lot to speed up production with a bigger facility and more equipment but it is still a time consuming process and let's give him some grace to make these fine molds!
No one else is producing a Cramer style mold with these kind of options for pins and the price!


This group buy is set up with a 15% discount it is applied at the time of check out.

He is still closing out some molds on his web site but those are for in stock molds only to help make room on the shelves......


Sign up list

2-cav HP in Brass
1)
2) (soflarick) - 2-cav HP all pins - soflarick at bellsouth . net
3) (saturn) - 2 cavity, HP all pins - saharahg@yahooDOTcom
4) (dimaprok) - 2 cav, HP, all pins - dimaprok at gmail dot com
5) (bronte454) - 2 cav, HP all pins - thadd3220 at yahoo dot com.
6) (BHiggins) - 2 Cav, HP all pins - bhiggins @ bcahs(dot)com
7) (Hardtail) - 2-cav HP all pins +handles - phett1958 At gmailDOTcom
8) (xiholdtruex) - 2 cav HP with all pins - xiholdtruex at gmail dot com
9) (cephas53) - 2-Cav, HP all pins - cephas53 at windstream.net
10)



4-cav HP in Brass
1) (Rancher1913) - 4 cav HP brass - rancher1913 at yahoo dot com - Zip 80701
2) (Michael J. Spangler) - 4 cav HP Brass - spanglerknives at me dot com - Zip 02719
3) (Lakehouse2012) - 4 cav, HP - sorgatz At ameritech d0t net - Zip 48442 (Honcho)
4) (pahrumpcaveman) - 4 Ca HP all pins included - m1shooter2 at hotmail
5) (ryan) - 4 cav HP Brass - dearborn416 AT yahoo DOT com
6) (spur0701) - 4 cav brass HP, plain base - Jeffery.Thorpe@verizon dot net
7) (Greg S) - 4 cav Brass, with all pins - gp spero 64 @ g mail dot com - 97302
8) (glockky) - 4 cavity HP, all pins + handles - twgrubb3 at g mail dot com
9) (ChuckjaxFl) - Needs 2 sets of pin ONLY of HP pins - (ChuckJaxFL) - chuck dot falls at gmail dot com
10) (salty dog) - 4 cav HP - va dot griz at gmail dot com
11) (Michael J. Spangler) - 4 cav HP Brass - spanglerknives at me dot com - Zip 02719
12) (big bore nut) - 4 cav HP all pins, GC in the largest diameter offered - greggoryashley AT yahoo dot com
13) (Eddie17) - 4 cav HP with all pins, FB - SS fasteddie at m s n dot com
14) (Stmtrn) 4-cav with all the goodies - Bbenj1967@g maildot com
15) (Txcowboy52) - 4-cav HP Brass - ricky_taylor62ATYAhooDotcom
16) (drfroglegs) - 4 Cavity Brass HP with + handles. - Drfroglegs at yahoo dot com
17) (bushog) - 4 Cavity HP, - boo-haaa at hotmail dotcom
18) (Pepe Ray) - 4 cav HP with all pins, +Handles - addiel at myottmail dot com
19) (Andy45) - 4-cavity UP with all pins, plain base - Laszlo nh at Comcast dot net
20) (Bigbore5) - 4 cav brass hp +handles - Waynehager5 AT gmail DOT com
21) (Billwnr) - 4 cav, HP with all pins + Handles - sbwarner at nctv dot com.
22) (cja245) - 4 cav HP mold with all pins, +handles - cja245 at gmail dot com
23) (Sc0) - 4 cavity HP brass all pins + handle - I v t d i at y a h o o dot com
24) (dalek) - 4 Cavity HP all pins - raubvogel on gee-mail
25) (GL49) - 4 cav HP, all pins - larrybohn at ashlandhome dot net
26) (kingstrider) - 4-cav, hollow point with all pins - overunderhunter at yahoo dot com
27) (monkey wrangler) - 4 cavity brass HP with all pins - mgehlen mesa At aol dot com
28) (rototerrier) - 4 cavity brass HP with all pins - p d a n 2 9 9 3 over at the g mail
29) (Duke3026) - 4cav brass all pins - Duke3026 at gmail
30) (DanInCt) - 4-cav brass all pins - Dan Eschner at Gm Ail dOT Com
31) (475AR) - 4 cavity brass with all pins - sddeem AT hotmail Dot com
32) (Trimjoe) - 4cav brass all pins - joeolin13 at gmail.com
33) (Bucko) - 4 cav, all pins - laedco58 at gmail.com
34) (ShootNSteel) - 4 Cav HP all pins - jmakosky16 at g mail dot com
35) (1I-Jack) - 4 Cav HP all pins included +handles - nw_trader at hotmail
36) (AZBrian) - 4 cav, HP, NLG +Handles - brian.dinse at yahoo dot com
37) (CoolHandMoss) - 4 cav brass, all pins +handles - Atobwill at gmail
38) (RT4406) - 4 cav HP, all pins, NLG - RT4406 at aol dot com
39) (rcn11thacr) - 4 Cav HP, NLG, +handles - Redoldspot at gmail dot com
40) (Smokedog2) - 4 cav HP brass, pins +handle - jeffm004 at gmail dot com - Zip 45042
41) (dperk) - 4 cav, HP, all pins - fuelinjected -at -gmail
42) (johnfl) - 4 cav, HP all pins - wind 28631 AT gmail dot com
43) (Double D) - 4-cav HP all the pins - l t c d u g g i n s (AT) gmail dot com
44) (FLYCUTTER) - 4-cav, HP, FB, w/all pins -RunderscoreKARKatATTdotNET
45) (TimD) - 4-cav, HP all pins, + HANDLES - kc2skg AT gmail DOT com
46) (Jlw6636) - 4-Cav HP, all pins, NLG - Jlw6636 @ sc Dot rr Dot com
47) (Wasalmonslayer) - 4 Cav HP, NLG - Max at yvmarine dot com
48) (osteodoc08) - 4-cav, HP all pins - t om ga rcia 15 at yahooo Dot CoM
49) (dg31872) - 4-cav, all pins - dgd dot 72 dot 2011 At g mail dot Com.
50) (pack3480) - 4 cav HP Brass all pins, NLG +handles - dcasad(at)hotmail(dot)com
51) (Kelz213) - 4 Cav HP all pins - Spr 02 que at gmail (dot) com
52) (Keith429421) - 4-cav HP all pins - dannybritton at att . net
53) (Capt.Red.44) 4 cav, brass, all HP pins, PB +handles - Capt.tipton at G Mail. Com
54)
55)
56)



6-cav Solid Brass
1) (redhawk357mag) - 6 Cav, - redhawk357magATgmailDOTcom - Zip 73533
2) (bushog) - 6 Cavity solid Brass - boo-haaa at hotmail dotcom
3) (DW475) - 6 cav solid, brass - dcw038 at msn dot com.
4)
5)
6)


8-cav solid in Aluminum
1) (ChuckJaxFL)- 8 Cavity Alum - chuck dot falls at gmail dot com
2) (Olsmoky) - 8 cav alum, NLG - olsmoky95 at gmail.com
3) (Olsmoky) - 8 cav alum, NLG - olsmoky95 at gmail.com
4) (KVO) - 8 cav alum, NGL - Bulls (underscore) Eye (underscore) 264 at hotmail dot com
5) (JAMESGR) - 8 cav alum, +handles - bri1590@charter dot net.
6) (AZBrian) - 8 cav alun, NLG, +handles - brian.dinse at yahoo dot com.
7) (pack3480) - 8 cav Solid Alum, NLG +handles - dcasad(at)hotmail(dot)com
8) (pack3480) - 8 cav Solid Alum +handles - dcasad(at)hotmail(dot)com
9)
10)
11)
12)

Wasalmonslayer
05-22-2019, 11:33 PM
This is a dandy design boys!
Hop on and get yourself one.
It shoots really well in everything I have tried it in rifle or pistol.
I have shot if from super mild to super wild and it out performs most other bullet designs I have tried.

rancher1913
05-23-2019, 07:12 AM
4 cav hp brass, rancher1913 at yahoo dot com, 80701

Michael J. Spangler
05-23-2019, 07:35 AM
4 CAV Brass. All Pins. spanglerknives at me dot com
02719

Kawacharles
05-23-2019, 12:27 PM
8-Cav Solid Aluminium

kawacharles1973 at g mail dot com

hicard
05-23-2019, 05:40 PM
4 CAV Brass. All Pins. hicard21 at outlook dot com

Lakehouse2012
05-23-2019, 10:54 PM
Thanks Gentlemen, I've got you on the list.


4 CAV Brass. All Pins. hicard21 at outlook dot com


8-Cav Solid Aluminium

kawacharles1973 at g mail dot com


4 CAV Brass. All Pins. spanglerknives at me dot com
02719


This is a dandy design boys!
Hop on and get yourself one.
It shoots really well in everything I have tried it in rifle or pistol.
I have shot if from super mild to super wild and it out performs most other bullet designs I have tried.


4 cav hp brass, rancher1913 at yahoo dot com, 80701

hicard
05-25-2019, 11:14 AM
I am #3 on the list and went to check my mold inventory and found out that I already have this mold so I am going to have to ask to be removed from the list. Sorry for the error. hicard21atoutlookdotcom

Lakehouse2012
05-27-2019, 08:49 PM
No Problem Sir, Ive updated the list.


I am #3 on the list and went to check my mold inventory and found out that I already have this mold so I am going to have to ask to be removed from the list. Sorry for the error. hicard21atoutlookdotcom

sfcairborne
05-28-2019, 09:11 PM
4 cav brass all pins
Mywhittyoneatyahoodotcom

Lakehouse2012
05-28-2019, 10:08 PM
Thanks Sir, I've got you added.


4 cav brass all pins
Mywhittyoneatyahoodotcom

sfcairborne
06-04-2019, 06:15 PM
Put me down for another:
6 cav brass solid
mywhittyoneatyahoodotcom

super6
06-05-2019, 05:17 PM
4 cav brass all pins
Super6 @hotmaildotcom
29710

Lakehouse2012
06-05-2019, 11:11 PM
Put me down for another:
6 cav brass solid
mywhittyoneatyahoodotcom

Ive added you on, thanks!

Lakehouse2012
06-05-2019, 11:13 PM
4 cav brass all pins
Super6 @hotmaildotcom
29710

I've got you on super6, thank you!

Lakehouse2012
06-30-2019, 07:55 AM
Sunday bump

Sent from my SM-G920V using Tapatalk

Kawacharles
07-01-2019, 04:20 PM
Can you put me out of the list? Sorry, and thanks!

Lakehouse2012
07-02-2019, 07:31 AM
Can you put me out of the list? Sorry, and thanks!No problem, ive removed you from this one.

Sent from my SM-G920V using Tapatalk

Lakehouse2012
07-28-2019, 06:52 PM
Sunday Bump for a phenomenal 357 load!

spur0701
08-06-2019, 09:14 PM
I'm in for a 4 cavity brass HP version, plain based please........email Jeffery.Thorpe@verizon dot net Thanks

Lakehouse2012
08-06-2019, 10:19 PM
I'm in for a 4 cavity brass HP version, plain based please........email Jeffery.Thorpe@verizon dot net Thanks

I've got you on the list, Thank you!

Michael J. Spangler
09-22-2019, 07:35 PM
Bumping it up for the Sunday night surfers that might want to order a mold and get this buy rolling.

sfcairborne
09-23-2019, 10:05 PM
Gotta come off the order list for both. Please remove me

Echd
09-23-2019, 10:49 PM
This is a truly excellent mold. If I didnt already have an 8 cav and a 4cav hp, I'd definitely be getting another.

I honestly doubt you will find a better 38 caliber design.

Lakehouse2012
09-24-2019, 06:04 AM
Gotta come off the order list for both. Please remove meIve removed yoi

Sent from my SM-G920V using Tapatalk

RedHawk357Mag
09-24-2019, 12:31 PM
6 Cavity Brass. redhawk357magATgmailDOTcom
Zip 73533
thank you

Sent from my XT1650 using Tapatalk

Lakehouse2012
09-25-2019, 08:44 AM
6 Cavity Brass. redhawk357magATgmailDOTcom
Zip 73533
thank you

Sent from my XT1650 using TapatalkThanks, ive added you to the list

Sent from my SM-G920V using Tapatalk

NYBushBro
09-30-2019, 10:58 AM
Is it possible to ask Miha to also offer this in his usual 2-cavity brass HP? Every one of my other Miha molds are 2-cavity, which is why I ask. You might get others (like myself) to sign up for this one. Thanks.

Lakehouse2012
09-30-2019, 11:09 AM
Is it possible to ask Miha to also offer this in his usual 2-cavity brass HP? Every one of my other Miha molds are 2-cavity, which is why I ask. You might get others (like myself) to sign up for this one. Thanks.Yes, you can have it in 2 cav HP. Post exactly what you want with email, etc and i will modify the thread tonight.

Sent from my SM-G920V using Tapatalk

NYBushBro
09-30-2019, 09:15 PM
Yes, you can have it in 2 cav HP. Post exactly what you want with email, etc and i will modify the thread tonight.

Sent from my SM-G920V using Tapatalk

Please sign me up for a 2-cavity HP brass mold w/ all pins (including penta).

mopedmedic AT hotmail DOT com. ZIP 12550

Lakehouse2012
09-30-2019, 09:25 PM
Please sign me up for a 2-cavity HP brass mold w/ all pins (including penta).

mopedmedic AT hotmail DOT com.

Great timing, I just sat down to comp to make nightly updates. You are on the list!

NYBushBro
10-07-2019, 09:54 AM
Bttt...

Michael J. Spangler
11-18-2019, 05:18 PM
Bump.

What is the rough lead time on this?
I haven’t done a group buy in a while. Do we wait to hit the quantity or for Mina to have an opening in his schedule?
Thanks!

Lakehouse2012
11-19-2019, 08:01 AM
Bump.

What is the rough lead time on this?
I haven’t done a group buy in a while. Do we wait to hit the quantity or for Mina to have an opening in his schedule?
Thanks!

Even though this is a rerun, miha needs to have a minimum order of pins. So official answer is 25, 4-cav HP molds. But Miha has the say if he wants to run with less.

@MiHec - any thoughts on this one?

Sent from my SM-G920V using Tapatalk

Michael J. Spangler
11-25-2019, 09:03 PM
Heads up all. There are a couple of these molds in stock on his website.
1 of the 6 cavity solids.
https://www.mp-molds.com/product/359-640-solid-plain-base-8-cavity-mold/

3 of the 2 cavity HP
https://www.mp-molds.com/product/359-640-hollow-point-plain-base-cavity-mold/

I picked up a solid while I wait for the 4 cavity HP to run.

vtech26
11-25-2019, 09:12 PM
4 cav brass HP mold please.
Vtech26atyahoo.com



Sent from my SM-G965U using Tapatalk

Lakehouse2012
11-25-2019, 11:06 PM
4 cav brass HP mold please.
Vtech26atyahoo.com



Sent from my SM-G965U using Tapatalk

Yes Sir, I've added you to the list.

Thanks!

Lakehouse2012
11-26-2019, 12:07 AM
Heads up all. There are a couple of these molds in stock on his website.
1 of the 6 cavity solids.
https://www.mp-molds.com/product/359-640-solid-plain-base-8-cavity-mold/

3 of the 2 cavity HP
https://www.mp-molds.com/product/359-640-hollow-point-plain-base-cavity-mold/

I picked up a solid while I wait for the 4 cavity HP to run.With Miha's Black-Friday sale going on right now, these are a fantastic price! If you are looking for fast turnaround on a solid or 2-cav, dont wait, these will sell out!

Sent from my SM-G920V using Tapatalk

RKJ
11-26-2019, 08:19 AM
I've been watching thingy for awhile and am finally going to jump in. I'd like the 4 cavity brass all pins. Bopilar at fidmail.com. Thanks. Now I might have to sell my Saeco 158GC mold.😇

Lakehouse2012
11-26-2019, 08:34 AM
I've been watching thingy for awhile and am finally going to jump in. I'd like the 4 cavity brass all pins. Bopilar at fidmail.com. Thanks. Now I might have to sell my Saeco 158GC mold.[emoji56]RKJ - thank you, ive added you to the list.

Sent from my SM-G920V using Tapatalk

glockky
11-27-2019, 11:07 AM
twgrubb3 at g mail dot com. 6 cavity solid brass with handles

Lakehouse2012
11-27-2019, 11:15 AM
twgrubb3 at g mail dot com. 6 cavity solid brass with handlesIve added you to the list.

Sent from my SM-G920V using Tapatalk

glockky
12-20-2019, 06:58 PM
Care to change mine to 4 cavity hp all pins.
twgrubb3 at g mail dot com

Lakehouse2012
12-21-2019, 01:36 PM
Care to change mine to 4 cavity hp all pins.
twgrubb3 at g mail dot com

I've modified you on the list, thanks

NYBushBro
03-02-2020, 01:06 PM
Bttt...

ChuckJaxFL
04-05-2020, 09:01 PM
I’m in - 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)

chuck dot falls at gmail dot com


Also, would it be possible to purchase a complete pin set for a 2 cav, without ordering the mold? I already have a 2 cav HP Mold, but some missing/damaged pins.


Sent from my iPad using Tapatalk

Lakehouse2012
04-07-2020, 12:34 AM
I’m in - 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)

chuck dot falls at gmail dot com


Also, would it be possible to purchase a complete pin set for a 2 cav, without ordering the mold? I already have a 2 cav HP Mold, but some missing/damaged pins.


Sent from my iPad using Tapatalk

Hi Chuck,

I've added you to the 8-cav and also added you under the 4-cav HP for pins only. hopefully Miha understands my note. Thanks

ChuckJaxFL
04-07-2020, 07:41 PM
Hi Chuck,

I've added you to the 8-cav and also added you under the 4-cav HP for pins only. hopefully Miha understands my note. Thanks

Thank you kindly. However, I'd only need enough pins for a 2 cavity mold.

vtech26
04-11-2020, 07:32 PM
Really looking forward to this mold!

vtech26
04-13-2020, 08:04 AM
Really looking forward to this mold!Please remove me from this group buy. Mihac had the mold I wanted.

Sent from my SM-G965U using Tapatalk

Lakehouse2012
04-13-2020, 05:35 PM
Please remove me from this group buy. Mihac had the mold I wanted.

Sent from my SM-G965U using Tapatalk

I've removed you from the list, glad he had what you wanted.

pahrumpcaveman
04-15-2020, 02:04 PM
I'd like the 4 Cavity HP all pins included 135 Euro's (114,75 with discount) please .. m1shooter2 at hotmail

Lakehouse2012
04-16-2020, 10:36 PM
I'd like the 4 Cavity HP all pins included 135 Euro's (114,75 with discount) please .. m1shooter2 at hotmail

Thankyou Sir, I put you in slot #4 of the HP section.

RKJ
04-18-2020, 01:12 AM
Lakehouse2012, Could you remove me from the GB also? Thank You, RKJ.

Lakehouse2012
04-18-2020, 10:24 AM
Lakehouse2012, Could you remove me from the GB also? Thank You, RKJ.No problem, I've removed you from the list.



Sent from my SM-A102U using Tapatalk

Greg S
04-18-2020, 05:09 PM
Add me to the list for a brass 4c with all pins. gpspero at g mail dot com. 97302

salty dog
05-20-2020, 07:11 AM
Sign me up for a 4 cav HP please. va dot griz at gmail dot com

Lakehouse2012
05-20-2020, 08:06 AM
Add me to the list for a brass 4c with all pins. gpspero at g mail dot com. 97302

Thanks, I added you in slot #7.

Lakehouse2012
05-20-2020, 08:08 AM
Sign me up for a 4 cav HP please. va dot griz at gmail dot com

Thanks Sir, I've added you to the list.

Onebad06vtx
05-21-2020, 04:45 PM
Put me down for a 4 cavity brass all pins.
Onebad06vtx at aol.com

Lakehouse2012
05-22-2020, 12:01 AM
Put me down for a 4 cavity brass all pins.
Onebad06vtx at aol.com

Thanks, I've got you on the list.

ddixie884
05-22-2020, 05:46 PM
Heck of a bullet................

vtech26
05-27-2020, 07:42 PM
Yeah, I really like this bullet as well. Anyone know if there is the same mold for 44 SPC / 44 Mag with the two crimp grooves?

Sent from my SM-G965U using Tapatalk

Michael J. Spangler
05-27-2020, 07:52 PM
I don’t think he does it with the 2 crimp grooves but he does have the same profile in just about all the popular diameters.
Beautiful design for sure.
I scored a couple solid moulds in this configuration and love them so much I can’t wait for the hollow point run.

Gamsek
05-28-2020, 01:15 AM
Yeah, I really like this bullet as well. Anyone know if there is the same mold for 44 SPC / 44 Mag with the two crimp grooves?

Sent from my SM-G965U using Tapatalk

https://www.mp-molds.com/product/mp-44-444-295-grain-hollow-point-mold-multichoice/

Not for 44spc/44Mag but he made one with 3 (?) for 44 Mag/ 444 Marlin

big bore nut
05-30-2020, 10:50 PM
Put me down for a 4 cav. HP with all pins Gas Check in the largest diameter offered greggoryashley AT yahoo dot com

Lakehouse2012
06-01-2020, 07:57 AM
Thank you Sir, I've added you on the list.


Put me down for a 4 cav. HP with all pins Gas Check in the largest diameter offered greggoryashley AT yahoo dot com

Eddie17
06-01-2020, 08:47 AM
I would like the 4 cavity brass with all pins.
SS fasteddie at m s n dot com

Lakehouse2012
06-01-2020, 09:12 AM
Awesome, I've added you to the list. Do you want FB or GC on the base?



I would like the 4 cavity brass with all pins.
SS fasteddie at m s n dot com

Eddie17
06-01-2020, 09:48 AM
Flat base
Thanks

Lakehouse2012
06-01-2020, 09:56 AM
Flat base
Thanks

ok, updated

Stmtrn
06-11-2020, 01:12 AM
I'll go for a four cavity with all the goodies. Bbenj1967@g maildot com

Lakehouse2012
06-11-2020, 11:35 PM
Thank you Sir, I've added you on!


I'll go for a four cavity with all the goodies. Bbenj1967@g maildot com

Txcowboy52
06-17-2020, 04:56 PM
Please sign me up for a 4 cavity HP Brass Thank you ricky_taylor62ATYAhooDotcom

Lakehouse2012
06-17-2020, 10:45 PM
I've added you onto the list, Thanks!


Please sign me up for a 4 cavity HP Brass Thank you ricky_taylor62ATYAhooDotcom

Wasalmonslayer
06-27-2020, 12:32 PM
Can you throw me on this one Chief 2 Cav please
Max at yvmarine dot com

Lakehouse2012
06-28-2020, 01:57 AM
RKJ - thank you, ive added you to the list.

Sent from my SM-G920V using Tapatalk

Yes Sir, you are on the list now, Thanks Max!!

drfroglegs
06-29-2020, 10:34 PM
Sign me up for a 4 Cavity Brass HP with a set of handles.

Drfroglegs at yahoo dot com

Lakehouse2012
06-30-2020, 12:27 AM
Sign me up for a 4 Cavity Brass HP with a set of handles.

Drfroglegs at yahoo dot com


thanks, I've added you!

bushog
07-02-2020, 10:29 AM
Please add me for:

One, 4 Cavity HP

and

One 6 Cavity solid Brass

boo-haaa at hotmail dotcom

Thanks!

Lakehouse2012
07-05-2020, 11:13 PM
Thanks Bushhog,

I've put you down for both molds on separate lines.


Please add me for:

One, 4 Cavity HP

and

One 6 Cavity solid Brass

boo-haaa at hotmail dotcom

Thanks!

Pepe Ray
07-06-2020, 01:03 PM
Please add me to the list for a 4 cav HP with all pins ,Plus Handles.
Thanks, Pepe Ray

addiel at myottmail dot com

Lakehouse2012
07-09-2020, 07:51 PM
Please add me to the list for a 4 cav HP with all pins ,Plus Handles.
Thanks, Pepe Ray

Hi Ray,
I've added you to the list, However I need your disguized email to get you finished here.

Pepe Ray
07-10-2020, 12:16 PM
I corrected post #82 - - -PR

Lakehouse2012
07-11-2020, 12:18 AM
I corrected post #82 - - -PR

Thanks Sir, I've updated you on the list.

Andy45
07-11-2020, 09:28 PM
Please add me for a 4-cavity UP with all pins, plain base.
Laszlo nh at Comcast dot net
Andy

Lakehouse2012
07-12-2020, 10:37 PM
Thanks Andy45, I've got you on the list!



Please add me for a 4-cavity UP with all pins, plain base.
Laszlo nh at Comcast dot net
Andy

Buck Butcher
07-13-2020, 02:51 PM
I’d like to be added to the HP 4 cavity brass mold list.

marks vw at aol dot com

Thanks!

Lakehouse2012
07-13-2020, 04:12 PM
Perfect, I've got you on the list!



I’d like to be added to the HP 4 cavity brass mold list.

marks vw at aol dot com

Thanks!

bowfin
07-14-2020, 01:58 PM
264813

These were cast from almost pure lead and loaded to 850 fps. The 640 is the one on the top, a Keith SWCHP on the bottom.

bowfin
07-14-2020, 02:02 PM
264818

Another (grainy) picture of the same bullets, with the Keith bullet showing more shank than the 640. I was looking for a cast boolit to reliably expand at .38 special +P velocities. I am going to drop the velocity down to 800 and see how they do.

These were all captured in water jugs. They went through a five gallon water jug and caught in the second one.

Billwnr
08-01-2020, 10:22 PM
I will take a 4 cavity brass HP with all pins. sbwarner at nctv dot com.

Lakehouse2012
08-01-2020, 11:03 PM
Thanks, I've added you to the list.



I will take a 4 cavity brass HP with all pins. sbwarner at nctv dot com.

Billwnr
08-01-2020, 11:17 PM
I think I also need to ask for handles.

cja245
08-03-2020, 06:38 PM
Please add me for a 4 cavity Brass HP mold with all pins, plus handles

cja245 at gmail dot com

Lakehouse2012
08-03-2020, 08:24 PM
I've added handles onto your order Sir.


I think I also need to ask for handles.

Lakehouse2012
08-03-2020, 09:14 PM
This GB is now in Last Call, will run very quickly!!

Sc0
08-06-2020, 05:37 AM
4 cavity HP brass all pins + handle, I v t d i at y a h o o dot com

Lakehouse2012
08-06-2020, 08:01 AM
4 cavity HP brass all pins + handle, I v t d i at y a h o o dot com

SC0, thanks, I've added you to the list.

dg31872
08-09-2020, 03:39 AM
Please add me for one four cavity brass hollow point with all pins.
dgd dot 72 dot 2011 AT gMail dot Com

Lakehouse2012
08-09-2020, 11:57 PM
Please add me for one four cavity brass hollow point with all pins.
dgd dot 72 dot 2011 AT gMail dot Com

Thanks Sir, I've added you to the list.

Billwnr
08-12-2020, 04:43 PM
I'll be glad when this finally goes to cutting and delivering moulds. I've been having problems getting an accurate load in my .357. Found out the mould thought was big enough mikes out at .356 as from the mould. I need that bigger diameter bullet.

Eddie17
08-20-2020, 04:59 PM
Any update on status?

Lakehouse2012
08-20-2020, 05:30 PM
Any update on status?

You must have read my mind, I pinged Miha less than an hour ago. He hasnt responded, but it's also very late at night for him. I'll let you all know when I get a response.

GL49
08-22-2020, 09:00 AM
Please add me to the list.
larrybohn at ashlandhome dot net
4 cav HP, all pins

Thanks.

Lakehouse2012
08-22-2020, 11:51 AM
Excellent, you are on the list!


Please add me to the list.
larrybohn at ashlandhome dot net
4 cav HP, all pins

Thanks.

Michael J. Spangler
08-22-2020, 11:58 AM
I am so exited for this mould. I can’t wait to play with the HP options in my ballistic gel.

kingstrider
08-24-2020, 08:27 PM
If it is not too late I want to sign up:

4-cavity brass hollow point with all pins

overunderhunter at yahoo dot com

Lakehouse2012
08-25-2020, 01:57 AM
If it is not too late I want to sign up:

4-cavity brass hollow point with all pins

overunderhunter at yahoo dot com

Your all set to go. thankyou

dg31872
08-30-2020, 05:07 AM
Due to unforseen circumstances. I must withdraw from this group buy.
I am number 24 in the four cavity que.
Thanks.

Lakehouse2012
08-30-2020, 11:55 PM
Due to unforseen circumstances. I must withdraw from this group buy.
I am number 24 in the four cavity que.
Thanks.

No Problem, life happens, I'll take you off right now.

Hope all is well.

FLYCUTTER
09-03-2020, 11:48 AM
Put me down for a 6 cavity solid brass. Thank you.
RunderscoreKARKatATTdotNET

Lakehouse2012
09-05-2020, 12:08 AM
Put me down for a 6 cavity solid brass. Thank you.
RunderscoreKARKatATTdotNET

Very good, you are on the list, thanks!!

Lakehouse2012
09-11-2020, 01:09 AM
Morning, talked with Miha tonight. This GB is still moving forward. I expect to see in the next few weeks we start getting deliveries.

Cosmic_Charlie
09-11-2020, 09:31 AM
if it is not too late; 4 cav brass all pins.
ecj at charter dot net

Lakehouse2012
09-11-2020, 10:37 AM
You are just in time! I've got you on the list.

Thanks,


if it is not too late; 4 cav brass all pins.
ecj at charter dot net

monkey wrangler
09-16-2020, 12:55 AM
If not to late put me down for the 4 cavity brass HP with all pins
mgehlen mesa At aol dot com

Lakehouse2012
09-16-2020, 09:54 PM
Hi Monkey wrangler, You are added to the list, Thanks!


If not to late put me down for the 4 cavity brass HP with all pins
mgehlen mesa At aol dot com

rototerrier
09-22-2020, 05:33 AM
Add me to the list. I have this mold already and would like another. It's an excellent design.

p d a n 2 9 9 3 over at the g mail

4 cav brass all pins

Lakehouse2012
09-22-2020, 04:20 PM
Add me to the list. I have this mold already and would like another. It's an excellent design.

p d a n 2 9 9 3 over at the g mail

4 cav brass all pins

Thanks Sir, I've added you to the list.

Duke3026
10-09-2020, 09:10 PM
4cav brass all pins

Duke3026 at gmail

Brick85
10-09-2020, 10:38 PM
Is the top punch included? I just realized this would make more sense for me than the NLG Hi-Tek design in discussion especially if it's basically ready to ship soon. If I'm not too late to get in.

Lakehouse2012
10-10-2020, 12:52 AM
Thanks Duke, you are on the list!


4cav brass all pins

Duke3026 at gmail

Lakehouse2012
10-10-2020, 12:54 AM
Yes Sir, there is a top punch included. Do you want to change to the grooved mold instead?


Is the top punch included? I just realized this would make more sense for me than the NLG Hi-Tek design in discussion especially if it's basically ready to ship soon. If I'm not too late to get in.

Brick85
10-10-2020, 06:44 AM
Yes Sir, there is a top punch included. Do you want to change to the grooved mold instead?

Yes, I would like to change, please and thank you. I'll cross post over on the other thread about the switch just for consistency.

4 cav HP, all the pins, please add a mould handle (I would rather have it here, sooner, than wait for it with the .223 mould). h o u s e o f t a n g at y a h o o dotcom

475AR
10-11-2020, 12:07 AM
I would like a 4 cavity brass with all pins.
sddeem AT hotmail Dot com

ChuckJaxFL
10-11-2020, 12:02 PM
I’m in - 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)

chuck dot falls at gmail dot com


Also, would it be possible to purchase a complete pin set for a 2 cav, without ordering the mold? I already have a 2 cav HP Mold, but some missing/damaged pins.


Sent from my iPad using Tapatalk


Hi Chuck,

I've added you to the 8-cav and also added you under the 4-cav HP for pins only. hopefully Miha understands my note. Thanks


Thank you kindly. However, I'd only need enough pins for a 2 cavity mold.

I just wanted to clear this up. I was hoping for a new pin set for my existing 2 cavity mould. I wouldn't need a set for a 4-cav. Sorry for any confusion.

DanInCt
10-19-2020, 08:01 AM
4cav brass all pins Dan Eschner at Gm Ail dOT Com

Lakehouse2012
10-19-2020, 03:38 PM
4cav brass all pins Dan Eschner at Gm Ail dOT Com

I've added you onto the list!

475AR
10-20-2020, 06:02 PM
I would like a 4 cavity aluminum with all pins.
sddeem AT hotmail Dot com
I want to verify you saw my request for one of these molds?

Lakehouse2012
10-20-2020, 07:09 PM
I want to verify you saw my request for one of these molds?

Hi 475,
I just saw your post and thanks for reminding me. Will you modify your post please, If you want the HP version it only comes in brass 4-cav. If you want the aluminum it only comes in 8-cav as a solid. Just edit your post to let me know which you want, and I will get you added.

Thanks,

Lakehouse2012

Lakehouse2012
10-21-2020, 04:18 PM
I would like a 4 cavity brass with all pins.
sddeem AT hotmail Dot com

Hi 475AR, I've added you to the list, thanks for the patience with me.

Trimjoe
10-24-2020, 10:13 AM
May I be added to the list? 4cav brass all pins. Is there a choice of penta?
joeolin13@gmail.com

Lakehouse2012
10-24-2020, 04:43 PM
Thanks I have added you to the list, the pin types I'll have to get from Miha, he usually gives a good assortment of pins.


May I be added to the list? 4cav brass all pins. Is there a choice of penta?
joeolin13@gmail.com

Trimjoe
10-24-2020, 05:30 PM
Thank you

Cosmic_Charlie
11-10-2020, 04:20 PM
I'm gonna pass, please remove me from the list.

Thanks

Lakehouse2012
11-11-2020, 06:57 PM
I'm gonna pass, please remove me from the list.

Thanks

No Problem, I've removed you.

Bigbore5
11-13-2020, 12:28 PM
Put me in 4 cavity brass, all pins. Email waynehager5atgmaildotcom

rototerrier
11-13-2020, 12:35 PM
Any word on whether any mold are being produced? Seems the group buys haven't been moving. Just curious what the word is. They used to move along fairly well.

Eddie17
11-13-2020, 04:48 PM
Again, is this closed?
Waiting for my mold! What’s going on?
Ed

Lakehouse2012
11-13-2020, 06:30 PM
Put me in 4 cavity brass, all pins

Hi Bigbore, I need you to edit this post and put in a disguised email please.

Lakehouse2012
11-13-2020, 06:32 PM
Again, is this closed?
Waiting for my mold! What’s going on?
Ed


Any word on whether any mold are being produced? Seems the group buys haven't been moving. Just curious what the word is. They used to move along fairly well.

Hi Guys, I've been pinging Miha alot lately and I'm not getting much response. I'll try and call him tomorrow in his morning or afternoon for an update.

historicfirearms
11-15-2020, 06:53 PM
Any chance for a gas checked boolit?

Lakehouse2012
11-15-2020, 08:54 PM
Any chance for a gas checked boolit?

I'm sorry but this boolit design doesnt have a GC option. I wish it did also, but Miha would have to create a new Cherry for a GC.

Bigbore5
11-20-2020, 07:12 AM
Ok email added

rototerrier
11-20-2020, 07:19 AM
Hi Guys, I've been pinging Miha alot lately and I'm not getting much response. I'll try and call him tomorrow in his morning or afternoon for an update.

Any news?

Bigbore5
11-20-2020, 07:58 AM
I heard Miha has been having trouble getting the pins. Just checked MP site. He has some molds in stock, but only with the solid and large hp pins. I would like to have all 4. Probably going to go ahead and get a 2 cavity for now and just get this 4 cavity when the gb goes through.

rototerrier
11-20-2020, 08:59 AM
Seems this has been ongoing for year(s).

Last GB I was in was delayed for the same reason.

It's been so long that I can't keep up. I've been a part of several GB's and have many MP molds in my collection so I can't keep up with what happened with which ones.

IIRC the last long wait was for a 45/70 mold with all pins that took a long time due to pins and that one I received. But I thought the pin issue was resolved.

Lakehouse2012
11-21-2020, 08:20 PM
Hi Guys,

Thanks for the reminder to update you... It's not good news though. I spoke with him last Thursday.

Slovenia is under strict lockdown. No employees are allowed to work unless it is essential. Miha is the only person in his building, he is way behind because of this. He is trying to keep his doors open shipping the molds that are in stock, but the whole economy is upside down.

On the positive side- he found a company that has a lathe for sale, which would allow him to start machining his own pins. He was supposed to go look at the lathe on Friday but I havent gotten an update on if he was able to buy it.

Stay tuned, he's trying to get through the GB's....


I heard Miha has been having trouble getting the pins. Just checked MP site. He has some molds in stock, but only with the solid and large hp pins. I would like to have all 4. Probably going to go ahead and get a 2 cavity for now and just get this 4 cavity when the gb goes through.


Seems this has been ongoing for year(s).

Last GB I was in was delayed for the same reason.

It's been so long that I can't keep up. I've been a part of several GB's and have many MP molds in my collection so I can't keep up with what happened with which ones.

IIRC the last long wait was for a 45/70 mold with all pins that took a long time due to pins and that one I received. But I thought the pin issue was resolved.

Michael J. Spangler
11-21-2020, 08:59 PM
Send him our best. Sounds like he’s in a tough spot and making the best of it.

I for one don’t care how long it takes, this mould is going to be worth the wait!

rickiesrevenge
11-29-2020, 01:15 AM
He shows this mold as in stock with 4 cavities

Lakehouse2012
11-29-2020, 11:08 AM
@MiHec is it true that you have this GB mold in your stock? If so, you should start distributing to all the guys that requested it.

Thanks,
Lakehouse2012

Sent from my SM-A102U using Tapatalk

Buck Butcher
11-29-2020, 02:34 PM
Please remove me from this buy.

Thanks,

Mark

Lakehouse2012
11-29-2020, 11:49 PM
Please remove me from this buy.

Thanks,

Mark

No problem, I've removed you from the buy.

Olsmoky
12-03-2020, 07:30 PM
I would be interested in the hi-tec or NLG. 2- 8 cavity aluminum molds

olsmoky95@gmail.com

Lakehouse2012
12-03-2020, 08:43 PM
Thank you again, I've added you to the 8-cav's with a NLG


I would be interested in the hi-tec or NLG. 2- 8 cavity aluminum molds

olsmoky95@gmail.com

Billwnr
12-08-2020, 11:46 AM
while I'm not thrilled with the delay it is nice to know the reason. Makes the wait easier.

super6
12-09-2020, 03:43 PM
Lakehouse2012, Please remove me from this group buy.

Lakehouse2012
12-09-2020, 08:17 PM
Lakehouse2012, Please remove me from this group buy.

I've removed you from the GB

ryan
12-12-2020, 01:54 PM
You can add me to the list, if it's still possible? Thank you!

4 cav HP Brass
dearborn416 AT yahoo DOT com

Lakehouse2012
12-12-2020, 08:35 PM
Hello Ryan,

I have added you into slot #5 of the GB. You are all set.

Thanks,


You can add me to the list, if it's still possible? Thank you!

4 cav HP Brass
dearborn416 AT yahoo DOT com

Bigbore5
12-13-2020, 12:06 AM
I don't see my name on the list. 4 cav brass hp with handles. Waynehager5 AT gmail DOT com

Lakehouse2012
12-13-2020, 12:20 AM
Hi Bigbore, I'm sorry if I missed you on an earlier post.

I have added you on slot #20 for your order,

Thanks very much!!


I don't see my name on the list. 4 cav brass hp with handles. Waynehager5 AT gmail DOT com

Greg S
12-13-2020, 11:20 AM
Please update my email to gp spero 64 @ g mail dot com. Oversight on my part.

dalek
12-15-2020, 02:14 PM
I am interested in being added to the list for

- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)

email is raubvogel, possibly on gee-mail

Lakehouse2012
12-15-2020, 11:37 PM
Please update my email to gp spero 64 @ g mail dot com. Oversight on my part.

Thanks, I've updated you on the list!

Lakehouse2012
12-15-2020, 11:39 PM
Welcome Dalek, I've added you in slot #24. Thank you!


I am interested in being added to the list for

- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)

email is raubvogel, possibly on gee-mail

dg31872
12-19-2020, 11:16 AM
I will take a six cavity solid in brass. DgDdot72dOt2011AtgMaildOtcOm.

Lakehouse2012
12-19-2020, 06:30 PM
I will take a six cavity solid in brass. DgDdot72dOt2011AtgMaildOtcOm.

Thanks, I've added you to the list!

KVO
12-22-2020, 06:08 PM
Please put me down for an 8 cavity solid aluminum, no lube groove.

Bulls (underscore) Eye (underscore) 264 at hotmail dot com

Lakehouse2012
12-22-2020, 10:53 PM
Yes Sir, I've added you to the list!

Thanks!


Please put me down for an 8 cavity solid aluminum, no lube groove.

Bulls (underscore) Eye (underscore) 264 at hotmail dot com

MrWolf
12-23-2020, 07:29 AM
Please put me down for an 8 cavity solid aluminum, no lube groove also.

ryulick at Gmail dot com

Bucko
12-23-2020, 12:06 PM
I would like a brass 4 cavity, with all the pins, if still available,please.
laedco58@gmail.com

Lakehouse2012
12-23-2020, 01:52 PM
Thanks to you both, I have you on the list!

Merry Christmas!


I would like a brass 4 cavity, with all the pins, if still available,please.
laedco58@gmail.com


Please put me down for an 8 cavity solid aluminum, no lube groove also.

ryulick at Gmail dot com

AZBrian
12-31-2020, 01:44 AM
If still open, I’d like an 8 cavity solid aluminum with no lube groove plus handles. Thank you!

brian.dinse at yahoo dot com.

DW475
12-31-2020, 02:46 AM
I'm in for the brass 6 cavity solid. dcw038 at msn dot com.

Lakehouse2012
12-31-2020, 11:26 AM
If still open, I’d like an 8 cavity solid aluminum with no lube groove plus handles. Thank you!

brian.dinse at yahoo dot com.


I'm in for the brass 6 cavity solid. dcw038 at msn dot com.

I've added you both onto the list.

Happy New Year!

ShootNSteel
01-01-2021, 10:12 PM
If possible please add me to: brass - 4 Cavity HP all pins included 135 Euro's (114,75 with discount) - thanks!
jmakosky16 at g mail dot com

1I-Jack
01-02-2021, 01:41 PM
Please add me to the list for "brass - 4 Cavity HP all pins included + handles"
email: nw_trader at hotmail

Lakehouse2012
01-03-2021, 01:25 AM
Thank you Gentlemen, I've added you both to the list!




Please add me to the list for "brass - 4 Cavity HP all pins included + handles"
email: nw_trader at hotmail


If possible please add me to: brass - 4 Cavity HP all pins included 135 Euro's (114,75 with discount) - thanks!
jmakosky16 at g mail dot com

AZBrian
01-10-2021, 03:40 AM
Please add another for me - the 4 cavity HP, all pins, no lube groove. brian.dinse at yahoo dot com. Thank you!!

Lakehouse2012
01-11-2021, 12:35 AM
Hi Brian, I've added you, thanks!


Please add another for me - the 4 cavity HP, all pins, no lube groove. brian.dinse at yahoo dot com. Thank you!!

CoolHandMoss
01-11-2021, 03:10 AM
I'll take one too. 4 cavity brass, all pins, with handles.

Atobwill at gmail

Lakehouse2012
01-11-2021, 12:24 PM
Awesome, I've added you to the list!


I'll take one too. 4 cavity brass, all pins, with handles.

Atobwill at gmail

saturn
01-12-2021, 04:52 PM
Put me down for a 2 cavity, all pins

saharahg@yahooDOTcom

Lakehouse2012
01-13-2021, 01:50 AM
Put me down for a 2 cavity, all pins

saharahg@yahooDOTcom

Yes Sir, I've got you on the list!

dimaprok
01-13-2021, 05:26 AM
Please add me for 2 Cavity HP all pins included dimaprok at gmail dot com

Lakehouse2012
01-13-2021, 02:22 PM
Please add me for 2 Cavity HP all pins included dimaprok at gmail dot com

Yes Sir, Ive added you to the list.

RT4406
01-14-2021, 09:47 AM
Please add one for me - the 4 cavity HP, all pins, no lube groove. Thank you Scott.
RT4406 at aol dot com

Lakehouse2012
01-14-2021, 12:59 PM
Thank you, I've got you on the list!


Please add one for me - the 4 cavity HP, all pins, no lube groove. Thank you Scott.
RT4406 at aol dot com

rcn11thacr
01-17-2021, 12:11 PM
I’m in.
4 Cavity HP, All pins included with no lube grove, plus handles.
Redoldspot at gmail dot com

Lakehouse2012
01-18-2021, 01:41 AM
Thanks again, I've got you on the list!


I’m in.
4 Cavity HP, All pins included with no lube grove, plus handles.
Redoldspot at gmail dot com

CoolHandMoss
01-18-2021, 09:26 AM
Are these coming gas check or plain base as default?

Can I request one gc cavity and 3 plain base?

MrWolf
01-18-2021, 12:34 PM
Lakehouse please put some handles with mine also. 8 cav aluminum #5 in that section.

Thanks,
Ron

Lakehouse2012
01-18-2021, 01:32 PM
Sorry coolhands, because this is an existing Cherry, and Miha only made it for the FB, that is the only option on this GB. If there is enough interest we could start a seperate thread and have a new cherry made for the GC option.



Are these coming gas check or plain base as default?

Can I request one gc cavity and 3 plain base?

Lakehouse2012
01-18-2021, 01:33 PM
I updated for you. Stay safe!


Lakehouse please put some handles with mine also. 8 cav aluminum #5 in that section.

Thanks,
Ron

smokedog2
01-21-2021, 07:26 AM
(Smokedog2) - 4 cav HP brass -- pins, and handle - jeffm004 at gmail dot com - Zip 45042

If gas checked becomes an option, I'm interested in that as well.

Lakehouse2012
01-21-2021, 11:13 AM
(Smokedog2) - 4 cav HP brass -- pins, and handle - jeffm004 at gmail dot com - Zip 45042

If gas checked becomes an option, I'm interested in that as well.

Thank you Sir, you are on the list!

Onebad06vtx
01-24-2021, 02:05 AM
Take me off the list please.
#11 onebad06vtx 4 cavity mold
Sold my 357's,down sizing calibers.
Thanks!

MrWolf
01-24-2021, 07:16 AM
Lakehouse take me off also please. I found my original that I thought got lost in the move.
8 cav aluminum plus handles (#5)
Thanks,
Ron

Lakehouse2012
01-24-2021, 09:20 PM
Ok, No problem guys. I've removed you both from the list.


Take me off the list please.
#11 onebad06vtx 4 cavity mold
Sold my 357's,down sizing calibers.
Thanks!


Lakehouse take me off also please. I found my original that I thought got lost in the move.
8 cav aluminum plus handles (#5)
Thanks,
Ron

CoolHandMoss
01-24-2021, 09:32 PM
I feel like the list has reached maturity. It has leveled off. Time to go to production!

AZBrian
01-27-2021, 04:22 PM
Lakehouse, would you please add a set of handles to my order for the brass 4 cavity hp - I am #36 there. Thank you very much! -Brian

Michael J. Spangler
02-01-2021, 09:34 AM
Lake house could you please mark me down for a second 4 cavity HP brass mould? Thank you!

dg31872
02-01-2021, 10:38 AM
Lake house, please remove me from the group buy.
I cleaned my mould locker and found that I already have one from a previous buy.
Six cavity solid.
Much obliged.

Lakehouse2012
02-01-2021, 04:30 PM
Lakehouse, would you please add a set of handles to my order for the brass 4 cavity hp - I am #36 there. Thank you very much! -Brian

Hi Brian, I made your update.

Lakehouse2012
02-01-2021, 04:31 PM
Lake house could you please mark me down for a second 4 cavity HP brass mould? Thank you!

Yes Sir, I put the 2nd mold in slot #11. Thanks

Lakehouse2012
02-01-2021, 04:33 PM
Lake house, please remove me from the group buy.
I cleaned my mould locker and found that I already have one from a previous buy.
Six cavity solid.
Much obliged.

No problem Sir, I've removed your request. Thanks

bronte454
02-04-2021, 03:15 PM
If possible can you add me for a 2 cavity lube groove , gas checked , HP . Email is thadd3220 at yahoo dot com.

Edit : if this is plain base only that is fine as well.

Lakehouse2012
02-04-2021, 07:56 PM
Yes Sir, I have added you to the list. This is PB only.


If possible can you add me for a 2 cavity lube groove , gas checked , HP . Email is thadd3220 at yahoo dot com.

Edit : if this is plain base only that is fine as well.

dperk
02-12-2021, 07:56 PM
Lakehouse, I'd like a 4 cavity HP please with all pins. fuelinjected -at -gmail Thank you!

Lakehouse2012
02-15-2021, 06:42 PM
Lakehouse, I'd like a 4 cavity HP please with all pins. fuelinjected -at -gmail Thank you!

Yes Sir, I've got you added

Joel Chavez
02-26-2021, 07:59 PM
so if i was to add myself to the list approximately how long before the moulds get shipped out? Just don’t want to wait a year before seeming the mould is all.

Lakehouse2012
02-27-2021, 01:25 AM
Hi Joel,

I'm sorry but I can't promise a date. Its in Miha's hands when he can line them up. But I can say that there are ALOT of people wanting this and it's a big order, I would "guess" that this should be 1-2 months and delivered. But I'm only guessing. Hope this helps.


so if i was to add myself to the list approximately how long before the moulds get shipped out? Just don’t want to wait a year before seeming the mould is all.

JAMESGR
03-01-2021, 10:24 PM
Lakehouse, I'll take an 8 cavity alum solid with lube groove and a set of handles.
bri1590@charter dot net.
Thanks
JAMESGR

Lakehouse2012
03-01-2021, 11:14 PM
You are good James, I've got you on the list!


Lakehouse, I'll take an 8 cavity alum solid with lube groove and a set of handles.
bri1590@charter dot net.
Thanks
JAMESGR

BHiggins
03-02-2021, 04:17 PM
Hi Lakehouse, can you put me down for the 2 Cavity HP? My email is bhiggins @ bcahs(dot)com

Lakehouse2012
03-02-2021, 05:34 PM
Yes Sir, I've added you into the list. Thanks,


Hi Lakehouse, can you put me down for the 2 Cavity HP? My email is bhiggins @ bcahs(dot)com

Hardtail
03-03-2021, 09:41 PM
Hi Lakehouse, can you put me down for the two cavity hp with pins and handles? My email is phett1958@gmailDOTcom

Lakehouse2012
03-04-2021, 01:44 AM
Yes Sir, I've got you on the list!

Thanks,


Hi Lakehouse, can you put me down for the two cavity hp with pins and handles? My email is phett1958@gmailDOTcom

Michael J. Spangler
03-04-2021, 09:21 AM
278944278945

I’m sure no one wants to see this picture right? �� I have this mould in a 2 cavity and last week I checked in on performance with some ballistic gel.

Unfired. Shot from a 1 7/8” barrel. 4” barrel. 18” barrel. All with 3 grains of clays not so nothing special or hot.

This design delivers.

johnfl
03-04-2021, 11:51 AM
4 cavity brass all pins please wind 28631 AT gmail dot com

Lakehouse2012
03-04-2021, 01:21 PM
Thanks Michael, those pics tell a great story, the pedals open so perfectly on the penta pins...

Johnfl - Thanks, I've added you to the list.


278944278945

I’m sure no one wants to see this picture right? �� I have this mould in a 2 cavity and last week I checked in on performance with some ballistic gel.

Unfired. Shot from a 1 7/8” barrel. 4” barrel. 18” barrel. All with 3 grains of clays not so nothing special or hot.

This design delivers.


4 cavity brass all pins please wind 28631 AT gmail dot com

johnfl
03-04-2021, 07:59 PM
Thanks.... the pictures pushed me over the edge ;)

soflarick
03-04-2021, 11:56 PM
Add me to the list for a 2 cavity HP mold with all the pins. soflarick at bellsouth . net

Thank you.

Yea, the photos were quite telling.

Lakehouse2012
03-08-2021, 12:36 AM
Thank you Sir, I've added you to this GB.


Add me to the list for a 2 cavity HP mold with all the pins. soflarick at bellsouth . net

Thank you.

Yea, the photos were quite telling.

Double D
03-13-2021, 11:45 PM
Please sign me up for a 4 cavity HP mold with all the pins.

Many thanks!!

l t c d u g g i n s (AT) gmail dot com

NYBushBro
03-14-2021, 03:14 PM
LAST Call on 03AUG2020..... ? Where are we with this one...

Lakehouse2012
03-14-2021, 08:32 PM
Please sign me up for a 4 cavity HP mold with all the pins.

Many thanks!!

l t c d u g g i n s (AT) gmail dot com

Yes sir, I've got you on the list!

Lakehouse2012
03-14-2021, 08:33 PM
LAST Call on 03AUG2020..... ? Where are we with this one...

I know, Miha is working on catching up. You guys know I can't say what date this runs, but I think it's getting close.

FLYCUTTER
03-15-2021, 12:34 PM
Lakehouse, I would be obliged if you take me off the list for a 6 cavity solid and put me on the list for a 4 cavity hp, pb w/pins

Lakehouse2012
03-15-2021, 01:24 PM
Lakehouse, I would be obliged if you take me off the list for a 6 cavity solid and put me on the list for a 4 cavity hp, pb w/pins

Yes Sir, I've moved you over

xiholdtruex
03-15-2021, 01:41 PM
Wow those pictures are beautiful if possible could you add me on for a

2 cavity hp with all pins

xiholdtruex at gmail dot com

Michael J. Spangler
03-15-2021, 02:12 PM
Wow those pictures are beautiful if possible could you add me on for a

2 cavity hp with all pins

xiholdtruex at gmail dot com


Thank you.

I’ll note that I shot another dozen or so from the rifle into that block and they all performed exactly the same. Not one failed.

The next melt of the ballistic gel with be set up to run some denim with the same bullets.

I have shot a bunch of respected factory J word bullets into gel and I can say that this design is extremely impressive compared to the factory fodder out there. Only the highest end defensive loads perform consistently. Anything below that is a hit or miss.

Lakehouse2012
03-15-2021, 02:57 PM
Wow those pictures are beautiful if possible could you add me on for a

2 cavity hp with all pins

xiholdtruex at gmail dot com

I've got you on the list!

TimD
03-15-2021, 05:18 PM
Please add me to the list for a 4 cavity Brass HP, all pins, + HANDLES if possible.

kc2skg AT gmail DOT com

Thanks,
Tim

Lakehouse2012
03-15-2021, 08:32 PM
Please add me to the list for a 4 cavity Brass HP, all pins, + HANDLES if possible.

kc2skg AT gmail DOT com

Thanks,
Tim

Ok, I've got you on the list!

Jlw6636
03-20-2021, 09:19 AM
Please add me to your list. 4 Cav HP, all pins, NLG,

Jlw6636 @ sc Dot rr Dot com

Lakehouse2012
03-20-2021, 12:18 PM
Please add me to your list. 4 Cav HP, all pins, NLG,

Jlw6636 @ sc Dot rr Dot com

You are on the list! Thank you!!

cephas53
03-22-2021, 09:43 AM
Still open?
If so, 2 Cavity HP all pins included please.
cephas53 at windstream.net

Lakehouse2012
03-22-2021, 02:02 PM
Still open?
If so, 2 Cavity HP all pins included please.
cephas53 at windstream.net

You are on the list! Thanks

NYBushBro
03-22-2021, 05:59 PM
Please remove me from this group buy.

1) (NYBushBro) - 2-cavity HP all pins (including penta) - mopedmedic AT hotmail DOT com

Lakehouse2012
03-22-2021, 09:52 PM
Please remove me from this group buy.

1) (NYBushBro) - 2-cavity HP all pins (including penta) - mopedmedic AT hotmail DOT com

Ok, no problem, I've removed you.

osteodoc08
03-23-2021, 08:26 AM
Don’t know how I missed this. If still open I’ll take 4c brass all pins

t om ga rcia 15 at yahooo Dot CoM

Lakehouse2012
03-23-2021, 06:19 PM
Don’t know how I missed this. If still open I’ll take 4c brass all pins

t om ga rcia 15 at yahooo Dot CoM

Thank you Sir, I've got you on the list!

dg31872
03-24-2021, 03:31 PM
I would like to have a four cavity, brass all pins mould. dgd dot 72 dot 2011 At g mail dot Com.

Lakehouse2012
03-24-2021, 04:47 PM
I would like to have a four cavity, brass all pins mould. dgd dot 72 dot 2011 At g mail dot Com.

Yes Sir, welcome back, I've got you on the list!

Thanks!

dalek
03-31-2021, 07:49 AM
Am I still on the list?

Lakehouse2012
04-01-2021, 09:16 AM
Am I still on the list?

Dalek, You need to make a post on this thread and I will add you in. Include what you want and the email and I'll get you added.

Lakehouse2012
04-04-2021, 05:18 PM
Am I still on the list?

Another member helped me here, Yes you are on the list already.

24) (dalek) - 4 Cavity HP all pins - raubvogel on gee-mail