44 Super Redhawk forcing cone angle

[Animal]

Hello folks,

I rented an 11deg forcing cone cutter to cut 3 of my 44 revolvers. I cut the forcing cone of 2 44 revolvers to 11 degrees. However, when I got to my Super Redhawk, it appeard to already be at, or close to 11 degree. Does Ruger make an 11degree cut on the 44 SRH?

[Outpost75]

After about 1985 most new Rugers were cut 11 degrees, but in .357 some were cut originally at 7-1/2 degrees and may also in other calibers if they went through Customer Service repair.

[Animal]

Okay. Good to know. Thank you