mattw
05-09-2019, 09:04 AM
I have been using PC for awhile now, not on everything but on enough that I needed to change my tools a little and change my workflow. I am using PC on fast 22's, 30's 9mm's and 38 stuff. Some are gas checked and some are not. Sizing is something that one must change to make the process more efficient!
I have tried the Lee push thru dies and while they work they are not fast or convenient. I have been using the Lyman 450, again works well not not fast at all. The solution I think I have settle on is the NOE Star bushing adapter and the sizing bushings they make. Price for the bushings is pretty darn good and the size options are great! I have only used the Star for stuff that I do a lot of, meaning 38 caliber and 40 caliber, mainly due to the cost of the dies and required top punches if seating gas checks. I have lived for years with just a 38 top punch since I can run my 40's without a gas check using the 38 punch. But now with the NOE bushings, I have decide to get more top punches. I just got in a 22 and 30 top punch and lock nuts from Latesmith. I will have to order a 41 at some point as well.
My point... These guys do some excellent machine work and finishing and I am looking forward to picking up more from both as money allows.
I have tried the Lee push thru dies and while they work they are not fast or convenient. I have been using the Lyman 450, again works well not not fast at all. The solution I think I have settle on is the NOE Star bushing adapter and the sizing bushings they make. Price for the bushings is pretty darn good and the size options are great! I have only used the Star for stuff that I do a lot of, meaning 38 caliber and 40 caliber, mainly due to the cost of the dies and required top punches if seating gas checks. I have lived for years with just a 38 top punch since I can run my 40's without a gas check using the 38 punch. But now with the NOE bushings, I have decide to get more top punches. I just got in a 22 and 30 top punch and lock nuts from Latesmith. I will have to order a 41 at some point as well.
My point... These guys do some excellent machine work and finishing and I am looking forward to picking up more from both as money allows.