PDA

View Full Version : ACTIVE: Rerun - Mihec 359 147/150 HiTek Heavy 9mm Competition bullet



Pages : [1] 2

Wasalmonslayer
05-02-2019, 11:07 PM
Hello Guys

We are going to run this one in Hollow Point 2 or 4 Cavity Brass and in 8 Cavity Aluminum Lee style or 6 Cavity Brass.
This is a very very good shooting bullet and has been very accurate for many shooters.
I have personally shot it in 9mm, 38 special, 357 mag and have been very very happy with it kind of my one does all bullet for general plinking and accuracy shooting. It fly's like a lazer beam, and it is very forgiving I have found many loads with different powders it likes - Clays, HP38, Unique, HS6, Red Dot.

Here is a pic of the design -
240975

Here are the specifics -

One of the best flat nose design 9mm 155/147gr competition bullet out there. This would be identical to the MP 359-135 (same ogive).

The as cast weight is 155 grain in Solid form it is designed with a small bevel base.
Can be cut for 147 SOLID in Flat base configurations
Can be cut for 155 SOLID in bevel base
Available diameter is .357


Weight can vary +/- 1-2 grains depending in alloy used. Available diameter is .357

Cost for molds is as follows -

2 Cavity Brass HP: 95 euros , all pins, top punch and allen keys
4 Cavity Brass HP: 135 euros , all pins, top punch and allen keys

6 Cavity Solid Brass 95 euros , top punch and allen keys
8 cavity aluminum Lee Style solid 95 euros , top punch and allen keys



These prices will be converted to us dollars when you get the PayPal invoice.

GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

This is a standard buy 10 to go active and when we get around 100 pins it will close.!


Trying to help Miha stream line mold making I want to set a one size for this buy lets say .359 as guys can add diameter with coating and it will still size well. Lets hear you thoughts??

Diameter will be cut at .359 on these molds as sizing down is easier that making them larger and the original design was spec'd to cast at .359

Wasalmonslayer
05-02-2019, 11:08 PM
Sign up Solid -

1) brunnerrene T gmailDOTcom - 6 Cav Brass .359 155 bb
2) middle earth sales and service at gmail dot com - 8 Cav Alum .359 155 bb
3)
4) TexasGunNut at outlook dot com - 8 Cav Aluminum
5) keith(dot)kohlruss(at)gmail(dot)com - 6 Cav Brass .359 155 bb
6) lws43athotmaildotcom - 6 Cav Brass 147 fb
7) lws43athotmaildotcom - 6 Cav Brass 147 fb
8) dpm308 at gmail dot com - Machine Mold 155 bb
9) trockroofingatgmaildotcom - 6 Cav Brass 155 bb
10) johns87 at comcast dot net - 8 Cav Alum 155 bb with handles
11) Williamss 159 at gee mail dot com - 8 Cav Alum 155 bb with handles
12) iliumconst at gmail dot com - 6 Cav Brass 147 FB with handles
13) dcasad(at)hotmail(dot)com - 6 Cav Brass 155 BB with handles
14) DPM308 dot @gmail dot com - 2 Cav Machine Mold 155 BB
15) drichardson40 at austin.rr dot com - 6 Cav Brass 147 FB
16) rebirney-gmail - 6 Cav Brass 155 BB
17) R f e u s t e l A T a t t DOT net - 8 Cav Alum 147 FB
18) SMSgtBulldog at G male dot comm - 8 Cav Alum 155 BB with handles
Pop
19) mvintx85 at yahoo dot com- 6 Cav Brass 147 FB with handles
20) toddtheplumberz at gmail.com - 8 Cav Alum 155 BB
21) badwolf dot db at gmail dot com - 8 Cav Alum 155 BB
22) rancher1913atyahoodotcom - 6 Cav Brass
23) boo-haaa at hot maildot com - 8 Cav Alum 155 BB
24) Zac alldredge at gmail dot com 8 Cav Alum 147 fb with handles
25)
26)

Sign Up HP -

1) middle earth sales and service at g mail dot com - 4 Cav Brass HP .359 155 bb
2) boomsticksfirearms at lowcountry dot com - 4 Cav Brass HP 147 HP fb
3) nelson390 at hotmail dot com - 4 Cav Brass HP 155 bb and handles
4) mgehlen mesa at aol dot com - 4 Cav Brass HP 147 fb
5) Vtech26ATyahooDOTcom - 4 Cav Brass HP 155 bb
6) driggert25atgmaildotcom - 4 Cav Brass HP 155 bb
7) Vtech26ATyahooDOTcom - 4 Cav Brass HP 155 bb
8) spr02que at gmail{DOT}com - 4 Cav Brass HP 155 bb
9) mopedmedic AT hotmail DOT com - 2 Cav Brass HP 155 bb
10) garrickg AT outlook DOT com - 4 Cav Brass HP 155 bb and handles
11) mpkunz AT ptd DOT net - 4 cav brass HP 155 bb
12) woodsroad AT comcast DOT net - 4 Cav Brass HP 155 bb
13) Peeeeebeeeslingeratprotonmaildotcom - 4 Cav HP 147 FB
14) ryulick at gmail dot com - 4 Cav Brass HP 147 FB
15) spharper at sbcglobal dot net - 4 Cav Brass HP 147 FB
16) camalone1 @ comcast DOT net - 2 Cav Brass HP 147 FB
17) Chad dot wansing at Gmail dot com - 4 Cav Brass HP 147 FB and handles
18) Ij2022 at proton m@1L dot com - 4 Cav Brass HP 155 BB
19) Sixshot@comcast.com - 4 Cav Brass HP 147 FB
20) ryanmattes@gmail.com - 4 Cav Brass HP 155 BB with handles
21)
22) bwongpd at Aol dot com - 4 Cav Brass HP 155 BB
23) starherz 199 at gee mail dot com - 4 Cav Brass HP 147 FB
24) mhammond4570 at gmail dot com - 4 Cav Brass HP 147 FB and handles
25) bhiggins @ bcahs (dot) com - 2 Cav Brass HP 155 BB
26) soflarick at bellsouth .net - 2 Cav Brass HP 147 FB
27) critt77matt at yahoo dot com - 4 Cav Brass HP 155 BB
28) boo-haaa at hot maildot com - 4 Cav Brass HP 155 BB
29) sheepdog8888@outlook dot com - 4 Cav Brass HP 155 BB with handles
30) dcasad(at)hotmail(dot)com - 4 Cav Brass 155 HP BB with handles
31) drichardson40 at austin.rr dot com - 4 Cav Brass 155 HP BB with handles
32) rboeser at at gmail dot dot com - 4 Cav Brass HP 155 BB with handles
33) markhames at me dot com - 2 Cav Brass HP
34) katy2kary at yahoo dot com - 4 Cav Brass HP 155 BB
35) archeryrob at gmail dot com - 4 Cav Brass HP 147 BB
36) Xp30br at g mail dot .com - 4 Cav Brass HP 147 FB
37) R f e u s t e l A T a t t DOT net - 2 Cav Brass HP 147 FB
38) klobbermeister at ameritech dot net - 4 Cav HP 155 BB with handles
39) jtedder at nctv dot com - 4 Cav Brass 147 FB
40) eebigredclifford at gmail dot comm - 4 Cav Brass HP 155 BB
41) ricky_taylor62ATyaHooodotcom - 4 Cav HP 155 BB
42) rancher1913atyahoodotcom - 4 Cav HP
43) btrcjAtCoxDOTnet - 2 Cav HP 147 FB
44)
45) kawacharles1973(at)gmail(dot)com - 4 Cav Brass HP 155 BB
46)
47)
48)

karlB
05-03-2019, 09:42 AM
Thanks @ Wasalmonslayer you made my day, thats exactly what I am waiting for.
I am in for 6 cavity brass in .356 with 155 grain bevel base

brunnerrene T gmailDOTcom

no Zip code needed, i live very close to Slovenia

jmort
05-03-2019, 11:04 AM
8 cavity aluminum. 356 155 grain
Please do a HP next time
Thank You
middle earth sales and service at gmail dot com

karlB
05-03-2019, 01:19 PM
8 cavity aluminum. 356 155 grain
Please do a HP next time
Thank You
middle earth sales and service at gmail dot com

A few years ago I got my hands on exactly that mold, but it is in .357, so I am happy to get it now in .356
241019

Wasalmonslayer
05-03-2019, 11:46 PM
Thanks @ Wasalmonslayer you made my day, thats exactly what I am waiting for.
I am in for 6 cavity brass in .356 with 155 grain bevel base

brunnerrene T gmailDOTcom

no Zip code needed, i live very close to Slovenia

Thank you sir you are added

Wasalmonslayer
05-03-2019, 11:48 PM
8 cavity aluminum. 356 155 grain
Please do a HP next time
Thank You
middle earth sales and service at gmail dot com


Got you added sir Thank you!

The hp mold runs right now are very very hindered by lack of people having time to make hp pins for Miha.
So till that situation improves solids are our option if we want quicker turn times.

Wasalmonslayer
05-10-2019, 09:13 AM
Bump for Friday :)

Wasalmonslayer
05-15-2019, 10:54 AM
Bumpski

Wasalmonslayer
05-18-2019, 08:44 AM
Saturday Bump

Wasalmonslayer
05-24-2019, 09:54 AM
Friday bump

Wasalmonslayer
06-11-2019, 01:57 PM
Bump it up

475AR
06-11-2019, 09:50 PM
I will do an 8 cav aluminum .357 155gr bb.
sddeem AT hotmail DOT com

Wasalmonslayer
06-11-2019, 11:47 PM
Trying to help Miha stream line mold making I want to set a one size for this buy lets say .357 as guys can add diameter with coating and it will still size well. Lets hear you thoughts??

Wasalmonslayer
06-11-2019, 11:50 PM
I will do an 8 cav aluminum .358 155gr bb.
sddeem AT hotmail DOT com

You are added sir.

Thank you and see the notes I list about sizing.

Thank You

475AR
06-12-2019, 02:02 PM
You are added sir.

Thank you and see the notes I list about sizing.

Thank You
It would make it a little clearer if you remove the sections of the description "Available Diameters" just my .02.
.357 diameter is fine for me.

Wasalmonslayer
06-13-2019, 08:59 AM
It would make it a little clearer if you remove the sections of the description "Available Diameters" just my .02.
.357 diameter is fine for me.

Thank you!
I did forget to change that.

I was hoping the other buys would chime in on this as well so we were all on the same page and if the popular vote was for another size we could go that route.

Wasalmonslayer
06-23-2019, 09:43 AM
Bump for the weekend

Lakehouse2012
06-26-2019, 07:32 PM
This one has IDPA or USPSA written all over it!

Sent from my SM-G920V using Tapatalk

Wasalmonslayer
07-27-2019, 02:07 PM
Bump for Saturday

Wasalmonslayer
08-11-2019, 10:08 AM
Livin the dream [smilie=2:

I added a hollow point option for this one to help kick it along

misterzr
08-14-2019, 03:44 PM
OK, I'll play too keith(dot)kohlruss(at)gmail(dot)com - 6 Cav Brass .357 155 bb

jmort
08-14-2019, 04:20 PM
4 cavity HP 155 grain
middle earth sales and service at g mail dot com

475AR
08-17-2019, 05:21 PM
Just so I am clear, the HP option is 147gr?? Or is there also a 155gr HP option as well??

Wasalmonslayer
09-04-2019, 04:02 PM
Just so I am clear, the HP option is 147gr?? Or is there also a 155gr HP option as well??

147 gr is flat base 155 gr is bevel base these are solid weights hp takes out about 5 - 7 grains

The 155 bb casts out at 147 gr in hp form.

Wasalmonslayer
09-04-2019, 04:02 PM
Added the other guys to the list please verify all is correct

Thank You!

475AR
09-04-2019, 07:25 PM
147 gr is flat base 155 gr is bevel base these are solid weights hp takes out about 5 - 7 grains

The 155 bb casts out at 147 gr in hp form.
Thanks, got it.
155gr bb is correct for me.

Wasalmonslayer
09-29-2019, 11:06 AM
Sunday bump

mikey44
10-25-2019, 02:21 PM
if this is still open i would like 8 Cav Alum .357 155 bb

Wasalmonslayer
12-17-2019, 12:42 AM
Yes sir still open just need your disguised email addy

Wasalmonslayer
05-08-2020, 09:03 AM
Quick bump

Lloyd Smale
05-14-2020, 07:03 AM
6 cav brass 147 grain flat base.

Lloyd Smale
05-14-2020, 02:19 PM
ill take a second 6 cav brass 147 flat base. Email is lws43athotmaildotcom

Wasalmonslayer
05-15-2020, 12:15 PM
ill take a second 6 cav brass 147 flat base. Email is lws43athotmaildotcom

Got you fixed up sir

Thank you!

Lloyd Smale
05-20-2020, 05:36 AM
come on people. this is a great 9mm bullet. Ive got the old original one and my mold is actually getting tired because I casted so many of them.

Mozz
05-27-2020, 11:39 PM
Can I have the 155 SOLID in bevel base, in a machine mold - ive spoken to the guy.

dpm308 at gmail dot com

Wasalmonslayer
05-29-2020, 12:40 PM
Can I have the 155 SOLID in bevel base, in a machine mold - ive spoken to the guy.

dpm308 at gmail dot com

Bevel or flat base?

Mozz
06-01-2020, 03:43 AM
Bevel or flat base?

Bevel please

Wasalmonslayer
06-01-2020, 10:43 AM
Bevel please

Got it helps if I could read ;)

Wasalmonslayer
06-01-2020, 10:52 AM
Can I have the 155 SOLID in bevel base, in a machine mold - ive spoken to the guy.

dpm308 at gmail dot com

Got you added sir
Thank You

Lloyd Smale
06-21-2020, 05:13 AM
answer me a question. Why do you guys want bevel based cast bullets. I can see gas checked shanks but bevel base?? Seems your asking for gas cutting and I had such miserable luck with getting great accuracy out of bevel based cast bullets in the past that you couldn't give me a bevel based mold. The old 147 lyman bevel base was a dud in every gun ive ever shot it in. Even in rifle bullets a flat base will about allways outshoot a bevel base. Its not like your going to shoot a 9mm bullet at a 1000 yards.

dragon813gt
06-21-2020, 08:28 AM
Posted by accident

sukivel
08-02-2020, 04:03 AM
answer me a question. Why do you guys want bevel based cast bullets. I can see gas checked shanks but bevel base?? Seems your asking for gas cutting and I had such miserable luck with getting great accuracy out of bevel based cast bullets in the past that you couldn't give me a bevel based mold. The old 147 lyman bevel base was a dud in every gun ive ever shot it in. Even in rifle bullets a flat base will about allways outshoot a bevel base. Its not like your going to shoot a 9mm bullet at a 1000 yards.

I am wondering the same. I am on the fence with this one cause want 147 gr with the large HP...

Would this bevel base be ok for a 9mm carbine at 1-200 yards, accuracy wise?


Sent from my iPhone using Tapatalk

Wasalmonslayer
08-05-2020, 08:40 PM
Hello guys

The bevel base on this was never designed for more accuracy it was there to help with bullet seating.
The bevel base plain base argument has been going on for ever and I have found no real difference at pistol ranges to about 50 yards if you develop a load for accuracy for your gun, alloy, intended velocity you would be very happy with this heavy 9mm/38-357 bullet.

Boomsticks Firearms
08-08-2020, 01:34 PM
4 cavity 147gr HP FB
boomsticksfirearms at lowcountry dot com

Wasalmonslayer
08-11-2020, 02:26 PM
4 cavity 147gr HP FB
boomsticksfirearms at lowcountry dot com

You are added.

Thank you!

Steve390Gold
08-28-2020, 01:44 AM
Im a little confused, but is the option of a 147 HP with a bevel base available? If so, 4 cavity brass please. :)

nelson390 at hotmail dot com

Wasalmonslayer
08-29-2020, 09:55 AM
Im a little confused, but is the option of a 147 HP with a bevel base available? If so, 4 cavity brass please. :)

nelson390 at hotmail dot com

Hello

147 is a flat base design 155 is bevel in solid form.
Hp weight less the bb in hp form is around 148ish with my alloy of range scrap.
Miha adjusts his cherry a to run a bevel or flat base.
To get a bevel the cherry is ran deeper in the cavity thus making a bullet a little longer which is a few grains heavier.

Let me know which way 147 fb or 155 bb.

Thank you
WS

Steve390Gold
09-01-2020, 12:14 PM
Oh yay!! Ok ill take a BB 155 with the HP option please.

BigHoss74
09-03-2020, 01:31 PM
I will take
1 4 cavity hollow point 147 grain bb
1 set mold handles
Bri2906 at aol dot com

Steve390Gold
09-22-2020, 12:26 PM
Oh and a set of handles for mine too.

Burnt Fingers
09-25-2020, 03:27 PM
A question about size.

Why not go with 358 or even 359?

It's easy to make them smaller, not so easy to make them larger.

I need 358 for a couple of my pistols.

Brick85
09-25-2020, 06:34 PM
So I'm finding some interest in this mould since the GC one seems to be going nowhere. But I have never triedbanybkind of alternative coating, and don't see a "convince me to give up lube grooves" thread in that section. Or a basic primer on coatings. Even the Hi-Tek thread seems to be most showing the stuff off. Is there a basic info thread to convince me to do all this extra work to coat my boolits?

Lakehouse2012
09-26-2020, 12:06 AM
Hey Guys, Sorry Im late to the party on this one. I designed this profile with the intent that you could get to max power factor with IPDA or USPSA (competition) and at the same time, easily load it in mass quantity for weekly matches.

1) the bevel base is specifically for those of you who know how to do the SMALLEST of flare on your brass and still want quick production style characteristics on your progressive loader. If you are using a single-stage and dont have a problem with 50/rounds per hour, then choose the FB.

2) Your powder charge is EVERYTHING to the success of the load. If you are trying to push this boolit at 1400fps, then you will have leading. Period, end of story. If you recognize that for PF on the IPDA game, you only need 850-950fps then you will adjust your powder to that level, and this boolit will rock-n-roll for you.

3) Cast size is important. But you have to determine what is right for you. Slug your barrel to determine whats best. I've slugged HK's that wouldnt like anything over .357. Conversely my Sigs and CZ's love casting at .360 and sizing to .3585. You need to know your equipment, and not expect the boolit to be silver-magic.

Late Add... 4) Coating IS worth the time, but you will have to practive how to put it on correctly. Whether you use PC or Hitek, it wont help at all if you havent baked it for the correct time. Hitek has been a blessing for me for years now, Pros' use it at all their matches. If applied correctly, it will gain you 100+ FPS without leading. Practice, practice, practice..... :)

Ok- Sorry Max, I'm off my soapbox now. Hopefully this helps some and not hinders...

Lakehouse2012


So I'm finding some interest in this mould since the GC one seems to be going nowhere. But I have never triedbanybkind of alternative coating, and don't see a "convince me to give up lube grooves" thread in that section. Or a basic primer on coatings. Even the Hi-Tek thread seems to be most showing the stuff off. Is there a basic info thread to convince me to do all this extra work to coat my boolits?


A question about size.

Why not go with 358 or even 359?

It's easy to make them smaller, not so easy to make them larger.

I need 358 for a couple of my pistols.


I am wondering the same. I am on the fence with this one cause want 147 gr with the large HP...

Would this bevel base be ok for a 9mm carbine at 1-200 yards, accuracy wise?


Sent from my iPhone using Tapatalk


answer me a question. Why do you guys want bevel based cast bullets. I can see gas checked shanks but bevel base?? Seems your asking for gas cutting and I had such miserable luck with getting great accuracy out of bevel based cast bullets in the past that you couldn't give me a bevel based mold. The old 147 lyman bevel base was a dud in every gun ive ever shot it in. Even in rifle bullets a flat base will about allways outshoot a bevel base. Its not like your going to shoot a 9mm bullet at a 1000 yards.

monkey wrangler
09-26-2020, 01:05 AM
Put me down for the 4 cavity brass HP with all pins 147 grain FB thanks
mgehlen mesa at aol dot com

Brick85
09-26-2020, 09:52 AM
So if I wanted to be able to put together loads which I wouldn't mind using for self-defense if the need arose, or at least boolits I could use for that purpose, it sounds like this is not the mould for that application? Particularly from a "carbine" with a 10.5" barrel? Sounds like velocity is not a friend to these boolits.

Lakehouse2012
09-26-2020, 01:11 PM
So if I wanted to be able to put together loads which I wouldn't mind using for self-defense if the need arose, or at least boolits I could use for that purpose, it sounds like this is not the mould for that application? Particularly from a "carbine" with a 10.5" barrel? Sounds like velocity is not a friend to these boolits.For a defense round, I'd GC them so I could turn up the speed. For plinking out of a 10.5, if you have lead at least 13brn and was running them below 1000fps, you should also like the boolit.

Sent from my SM-A102U using Tapatalk

Burnt Fingers
09-26-2020, 01:47 PM
Hey Guys, Sorry Im late to the party on this one. I designed this profile with the intent that you could get to max power factor with IPDA or USPSA (competition) and at the same time, easily load it in mass quantity for weekly matches.

1) the bevel base is specifically for those of you who know how to do the SMALLEST of flare on your brass and still want quick production style characteristics on your progressive loader. If you are using a single-stage and dont have a problem with 50/rounds per hour, then choose the FB.

2) Your powder charge is EVERYTHING to the success of the load. If you are trying to push this boolit at 1400fps, then you will have leading. Period, end of story. If you recognize that for PF on the IPDA game, you only need 850-950fps then you will adjust your powder to that level, and this boolit will rock-n-roll for you.

3) Cast size is important. But you have to determine what is right for you. Slug your barrel to determine whats best. I've slugged HK's that wouldnt like anything over .357. Conversely my Sigs and CZ's love casting at .360 and sizing to .3585. You need to know your equipment, and not expect the boolit to be silver-magic.

Late Add... 4) Coating IS worth the time, but you will have to practive how to put it on correctly. Whether you use PC or Hitek, it wont help at all if you havent baked it for the correct time. Hitek has been a blessing for me for years now, Pros' use it at all their matches. If applied correctly, it will gain you 100+ FPS without leading. Practice, practice, practice..... :)

Ok- Sorry Max, I'm off my soapbox now. Hopefully this helps some and not hinders...

Lakehouse2012


I'm really interested in this boolit. I know what it's for. However with an as cast size of 357 it's worthless to me. It would also be a great 38 spl boolit. But not at 357.

Lakehouse2012
09-26-2020, 03:02 PM
I'm really interested in this boolit. I know what it's for. However with an as cast size of 357 it's worthless to me. It would also be a great 38 spl boolit. But not at 357.I'll talk with max about updating that, cause this mold was designed to cast at .359...

Sent from my SM-A102U using Tapatalk

Wasalmonslayer
09-26-2020, 03:40 PM
Hello Guys,

I have been buried at work and not able to spend any time on these buys....
Again very sorry.

Early on in this buy Miha wanted to standardize his buys so he did not have so many "custom" molds.
I did a quick poll and the majority wanted .357.

If everyone wants to go to another size I am a ok with it but it has to be among the group in the buy.

Chris hit the nail on the head with his details and I could not have said it better myself!

Thank You Chris for chiming in and helping out :)

Wasalmonslayer
09-26-2020, 03:50 PM
Oh yay!! Ok ill take a BB 155 with the HP option please.

You are added

Thank You!
WS

Wasalmonslayer
09-26-2020, 03:51 PM
I will take
1 4 cavity hollow point 147 grain bb
1 set mold handles
Bri2906 at aol dot com

Only way to get bb is 155 grain.
Is this ok? Cherry is cut for 155 bb and to make a 147 he shallows the cut and that gives us a 147 gr bullet.

Thanks
WS

Wasalmonslayer
09-26-2020, 03:56 PM
Oh and a set of handles for mine too.

Got you fixed up

Thank You

Wasalmonslayer
09-26-2020, 03:57 PM
Put me down for the 4 cavity brass HP with all pins 147 grain FB thanks
mgehlen mesa at aol dot com

Got you fixed up

Thank You
WS

Wasalmonslayer
09-26-2020, 04:01 PM
If everyone is ok with this lets go back to the .359 diameter original cutting i am ok with that and as burn't fingers states it is easy to shrink them but making them bigger is a pain in the butt!!

Please everyone think about it and report back please.

Brick85
09-26-2020, 11:02 PM
For a defense round, I'd GC them so I could turn up the speed. For plinking out of a 10.5, if you have lead at least 13brn and was running them below 1000fps, you should also like the boolit.

Sent from my SM-A102U using Tapatalk

Thanks. Is it possible to GC these, however, without the GC base? Or any way to pay Miha a bit more to run the GC cherry in there? Maybe I should ask him directly?

Burnt Fingers
09-27-2020, 01:19 PM
If everyone is ok with this lets go back to the .359 diameter original cutting i am ok with that and as burn't fingers states it is easy to shrink them but making them bigger is a pain in the butt!!

Please everyone think about it and report back please.

:drinks:

Burnt Fingers
09-27-2020, 01:22 PM
I've run the NOE TELCO through a both a 10.5" and a 16" barrel and had no problems with leading. These heavy boolits don't need to run fast.

My alloy is a 11-12 BHN. Some of my loads show a book velocity of around 950 fps through a 5" barrel.

Bullet fit is always king!

Wasalmonslayer
09-29-2020, 08:44 AM
Thanks. Is it possible to GC these, however, without the GC base? Or any way to pay Miha a bit more to run the GC cherry in there? Maybe I should ask him directly?

Would require another group buy this one he already has the cherry and it is a non gas check design.

Wasalmonslayer
09-29-2020, 08:45 AM
I've run the NOE TELCO through a both a 10.5" and a 16" barrel and had no problems with leading. These heavy boolits don't need to run fast.

My alloy is a 11-12 BHN. Some of my loads show a book velocity of around 950 fps through a 5" barrel.

Bullet fit is always king!


I agree 100% fit is everything!

hlvabeach
09-29-2020, 03:05 PM
Ok ill take a brass 4 cavity BB with the HP option.

Sent from my SM-G975U1 using Tapatalk

Wasalmonslayer
09-30-2020, 01:15 AM
Ok ill take a brass 4 cavity BB with the HP option.

Sent from my SM-G975U1 using Tapatalk

Need email addy to add you to the list.

Thanks

hlvabeach
09-30-2020, 06:26 AM
Need email addy to add you to the list.

ThanksVtech26ATyahooDOTcom

Sent from my SM-G975U1 using Tapatalk

D-RIG
10-02-2020, 11:12 PM
I'd like a 4 cav brass HP - BB with handles

driggert25atgmaildotcom

Brick85
10-03-2020, 07:47 AM
I'd like a PB 6 cav brass mould with HP, please and thank you.

house of tang at yahoo dotcom

I figure I can do PB gas checks.

Wasalmonslayer
10-08-2020, 10:23 AM
I'd like a PB 6 cav brass mould with HP, please and thank you.

house of tang at yahoo dotcom

I figure I can do PB gas checks.

Sorry no 6 cavity hollow points only 4 if that is ok I will get you on the list.

Thanks
WS

Wasalmonslayer
10-08-2020, 10:24 AM
Everyone is updated and added to this buy.

With the exception of brick85 just need feed back from him.

Burnt Fingers
10-08-2020, 12:51 PM
Now that we have the sizing issue down I'll take an eight cavity solid.

TexasGunNut at outlook dot com

Brick85
10-08-2020, 02:06 PM
Sorry no 6 cavity hollow points only 4 if that is ok I will get you on the list.

Thanks
WS

4 cav will work for me. Thanks!

Wasalmonslayer
10-09-2020, 10:32 AM
4 cav will work for me. Thanks!

Got you added

Thank You
WS

Wasalmonslayer
10-09-2020, 10:34 AM
Now that we have the sizing issue down I'll take an eight cavity solid.

TexasGunNut at outlook dot com

Have you listed Texasgunnut what configuration do you want and I will add it 147 fb or 155 bb??

Brick85
10-09-2020, 10:41 PM
So I just realized maybe the .359 MP mould in the active buy section with the lube groove would likely make more sense for me. That way I can shoot it lubed in .38 special or .357 magnum, and it would wind up sizing down the same as this one in 9mm at .356 anyway, right? That one is almost ready to ship. Is there any benefit to this design that I'm missing, not having tried either of them in any of my guns to develop a preference?

Lakehouse2012
10-10-2020, 01:02 AM
So I just realized maybe the .359 MP mould in the active buy section with the lube groove would likely make more sense for me. That way I can shoot it lubed in .38 special or .357 magnum, and it would wind up sizing down the same as this one in 9mm at .356 anyway, right? That one is almost ready to ship. Is there any benefit to this design that I'm missing, not having tried either of them in any of my guns to develop a preference?

you are right on the money Brick. That mold gets you 3 different loads. I do light magnum 357 with it and use it as cast, no sizing. For 9mm and maybe 38 special I will size to .3575 on my barrels. Slug yours to determine best fit.

Brick85
10-10-2020, 06:49 AM
Please remove me from this list since I will get the other one. Thanks!

475AR
10-11-2020, 12:09 AM
Please remove me from this buy, changing to the 359-640 active mold GB.
Thanks.

Wasalmonslayer
10-24-2020, 01:45 PM
Just an fyi the other 640 design is quite a bit heavier than this one.
I have it and shoot it a lot but in solid form it is 170 and the bullet sits very very deep in the 9mm case if you are wanting a heavy 9mm mold this one will work out better for you.

Not trying to sway you just want to inform you they are very different designs.
The 360 640 is a 155 solid 140 ish large hp and it will work very well in 9mm it has a single lube groove and a single crimp groove.

This one is not far from hitting our rerun #'s as it is not a new design.

Everyone is updated to my knowledge but please verify that.

Thank You!

Kelz213
10-27-2020, 09:38 PM
Hello,

Please include me on the buy for the 4 Cavity Brass HP: 135 euros including shipping, all pins, top punch and allen keys. spr02que at gmail{DOT}com.

hlvabeach
10-28-2020, 12:46 PM
I am on the list twice (vtech26atyahoo.com ). I only need one mold.

Thanks

Sent from my SM-G975U1 using Tapatalk

Wasalmonslayer
11-02-2020, 12:56 AM
Hello,

Please include me on the buy for the 4 Cavity Brass HP: 135 euros including shipping, all pins, top punch and allen keys. spr02que at gmail{DOT}com.

Which configuration?
147 FB or 155 BB

Kelz213
11-02-2020, 12:28 PM
Hello. The 155 BB. Thank you

Sent from my SM-N960U using Tapatalk

NYBushBro
11-10-2020, 11:31 AM
Please sign me up for a 2-cavity 155 BB HP with all pins.

mopedmedic AT hotmail DOT com

GarrickG
11-15-2020, 12:59 PM
Please include me for a 4-cavity brass HP 155 bb and a set of handles

garrickg AT outlook DOT com

Wasalmonslayer
11-17-2020, 12:48 AM
Got you guys added please verify all is good your options are correct.

Thank You
WS

45-70 shoooter
12-07-2020, 05:42 AM
I am interested in this mold but would like the final word on as cast diameter I am seeing .357 or .359
Weston

Burnt Fingers
12-08-2020, 02:22 PM
I am interested in this mold but would like the final word on as cast diameter I am seeing .357 or .359
Weston

.359, just like it says in the OP in big red letters.

Wasalmonslayer
12-12-2020, 10:30 AM
Thanks burntfingers yes this one is spec’d to cast at .359

historicfirearms
12-12-2020, 01:54 PM
I will take an 8 cavity 147 grain mold. nomadpilot77 at gmail dot COM.

mpkunz607
12-13-2020, 09:16 PM
mpkunz AT ptd DOT net - 4 cav brass HP 155 bb

Woodsroad
12-13-2020, 10:10 PM
woodsroad AT comcast DOT net - 4 cav brass HP 155 beveled base

Wasalmonslayer
12-15-2020, 11:00 PM
Got you guys added

Thank you!

sukivel
12-15-2020, 11:11 PM
Ok Ive watched long enough...

2 cav brass hp 155 bb

Inkgardener at gmail dot com

How close is this by the way?


Sent from my iPhone using Tapatalk

Wasalmonslayer
12-21-2020, 01:41 AM
Got you added

Not sure on timing this pandemic has really messed things up!
Hopefully Miha will chime in on it sooner than later.

Thank you
WS

MrWolf
12-21-2020, 07:19 AM
I'll bite. 4 Cav Brass HP 147 fb with handles. ryulick at gmail dot com.
Thanks,
Ron

475/480
12-21-2020, 01:28 PM
Sign me up
4 cavity Brass HP .359- 147 PB.- spharper at sbcglobal dot net

Thanks
Sean

historicfirearms
12-25-2020, 10:23 PM
Please take me off. I'm currently #9. Nomadpilot77
Miha has these in stock and I just ordered one. Not sure what's going on with these group buys but I've noticed this same thing a few other times.

Burnt Fingers
12-28-2020, 04:12 PM
Please take me off. I'm currently #9. Nomadpilot77
Miha has these in stock and I just ordered one. Not sure what's going on with these group buys but I've noticed this same thing a few other times.

I'm not finding this boolit mold in stock on his site.

sukivel
12-28-2020, 07:05 PM
I'm not finding this boolit mold in stock on his site.

Me neither, nor did I last week when I looked through his entire inventory.


Sent from my iPhone using Tapatalk

Wasalmonslayer
12-29-2020, 12:39 PM
All updated guys.

Thank you!
WS

historicfirearms
12-29-2020, 09:54 PM
Me neither, nor did I last week when I looked through his entire inventory.


Sent from my iPhone using Tapatalk

https://www.mp-molds.com/product/357-147-flat-round-nose-flat-base-6cavity-mold-no-lube-groove/

Might not be the exact one because no drawing is available but it's close enough for me. Shows 9 in stock.

Burnt Fingers
12-30-2020, 01:05 PM
https://www.mp-molds.com/product/357-147-flat-round-nose-flat-base-6cavity-mold-no-lube-groove/

Might not be the exact one because no drawing is available but it's close enough for me. Shows 9 in stock.

That's a different boolit. I have that mold in an 8 cavity aluminum.

sukivel
12-30-2020, 08:49 PM
That's a different boolit. I have that mold in an 8 cavity aluminum.

Yeah its not a HP either, which is what Im going after.


Sent from my iPhone using Tapatalk

historicfirearms
12-31-2020, 07:41 AM
That's a different boolit. I have that mold in an 8 cavity aluminum.

How does it shoot? I am curious about the measurements of it. Is it close to the drawing of this group buy? Just wondering if it is worth getting both.

blasternank
12-31-2020, 08:00 PM
I will take the following:

155 HP 6 cav Brass

trockroofingatgmaildotcom

Burnt Fingers
01-01-2021, 12:25 PM
I will take the following:

155 HP 6 cav Brass

trockroofingatgmaildotcom

Hollow point will only come in a 4 cavity.

Wasalmonslayer
01-02-2021, 11:11 AM
As burnt fingers stated most cavities in hp config is 4 are you ok with that?

Thanks
WS

Rescue1008
01-15-2021, 08:51 PM
2 cav HP 147 FB.

camalone1 @ comcast DOT net

Wasalmonslayer
01-19-2021, 04:41 PM
2 cav HP 147 FB.

camalone1 @ comcast DOT net

Got you added.

Thanks
WS

Wansingct
01-24-2021, 11:49 PM
4 cavity Brass HP .359- 147 PB.- Chad dot wansing at Gmail dot com with handles please.

blasternank
01-27-2021, 01:04 PM
I will take the following:

155 HP 6 cav Brass

trockroofingatgmaildotcom

Sorry, instead the 155 gr solid 6 cavity brass beveled base.

mrmachinist
02-01-2021, 10:13 PM
Please put me down for a brass 2 cavity 155 hp with handles. Kylesavoie at Gmail dot com

Edit:

Id be willing to buy different style pins if available.


Sent from my iPhone using Tapatalk

hlvabeach
02-02-2021, 06:39 PM
I am on the list twice (vtech26atyahoo.com ). I only need one mold.

Thanks

Sent from my SM-G975U1 using TapatalkCan we get penta pins for this mold?

Sent from my SM-G975U1 using Tapatalk

Burnt Fingers
02-03-2021, 01:08 PM
Can we get penta pins for this mold?

Sent from my SM-G975U1 using Tapatalk

I believe that "all pins" means it's coming with penta pins.

Johns87
02-04-2021, 08:16 PM
If I may ask a question? I haven't starting casting yet, simply because I can't find molds. Will I be able to size these cast boolits with a Lee sizer bottom punch? I don't quite understand the top punch issue. Thanks, John

mrmachinist
02-04-2021, 08:21 PM
If I may ask a question? I haven't starting casting yet, simply because I can't find molds. Will I be able to size these cast boolits with a Lee sizer bottom punch? I don't quite understand the top punch issue. Thanks, John

I hope so, thats what Im planning to do.

From my research, the different top punches are needed for different bullet styles that size base first (pushing from the nose). Lee dies push from the base which is almost always flat.

I casted my first Bullets last weekend so I am by no means an expert.


Sent from my iPhone using Tapatalk

Burnt Fingers
02-05-2021, 06:08 PM
The top punch is for a traditional lube-sizer. The Lee system is totally different.

You will be able to size them with the Lee push through system.

Johns87
02-06-2021, 09:02 PM
mrmachinist and Burnt Fingers, thanks for the clarification.

Wasalmonslayer, If it's not too late, put be down for an 8 cavity aluminum .359 155g BB + MP handles.

johns87 at comcast dot net Thanks

sixshot
02-07-2021, 04:44 PM
Sixshot@comcast.com, 4 cavity brass HP, 147 gr FB.

Dick

ryanmattes
02-11-2021, 12:48 AM
Please sign me up for a 4 Cavity Brass .359 HP 147g bevel base with handles

ryanmattes@gmail.com

135 euros is about $165 or thereabouts, right?

jmcghee
02-11-2021, 07:36 PM
Please sign me up for a 4 Cavity Brass .359 HP 147g bevel base thank jim jamesallen1954@gmail.com

PSGCLTS
02-12-2021, 08:56 PM
Newbie question. is there a performance difference flat base and bevel base. I compete in USPSA and Steel Challenge

Thanks for your response

Wasalmonslayer
02-13-2021, 09:51 AM
Newbie question. is there a performance difference flat base and bevel base. I compete in USPSA and Steel Challenge

Thanks for your response

Thru all my testing they are just easier to load.
I have never noticed and accuracy difference that some talk about. I shoot the same groups with or without bevel base.

Wasalmonslayer
02-13-2021, 09:52 AM
Been swamped at work and home will get this updated hopefully today.

Thanks!

PSGCLTS
02-13-2021, 05:59 PM
Thanks for the input

PSGCLTS
02-13-2021, 06:25 PM
Please sign me up. 4 cavity brass HP 155 bb bwongpd at Aol dot com

Thanks

Beetmagnet
02-16-2021, 09:13 AM
Sign me up
4 cav brass HP 147 fb .357,
Are we not disguising our email anymore?
Mine is starherz 199 at gee mail dot com

WilliamSS159
02-16-2021, 10:22 AM
8 cavity aluminum 357 if available otherwise 359 155 grain bevel base
Williamss 159 at gee mail dot com

Area Man
02-21-2021, 09:40 AM
Been looking for an excuse to try powder coating. Looks like this is it.

Brass 4 cavity 147 grain HP FB

I'll take handles, too if they're available.

mhammond4570 at gmail dot com

ilium
02-22-2021, 08:16 PM
6 Cavity Solid Brass Flat base with handles.
iliumconst at gmail dot com

Wasalmonslayer
02-27-2021, 09:15 PM
Sorry guys work had not slowed and I am finally getting a guy up to speed to help me out so I can have a life :)

Everyone is updated and please let me know if I made a mistake!

Buy is wide open and ready for more buyers ;)

Area Man
02-28-2021, 04:57 PM
Sorry guys work had not slowed and I am finally getting a guy up to speed to help me out so I can have a life :)

Everyone is updated and please let me know if I made a mistake!

Buy is wide open and ready for more buyers ;)

How many more need to sign up before we pull the trigger?

Wasalmonslayer
03-01-2021, 02:17 AM
How many more need to sign up before we pull the trigger?

Trigger pull is up to Miha he pulls it when he has everything ready.
It is not when we hit an exact #

He usually lets us know when we are close.

Thanks
WS

tbpollard
03-02-2021, 09:18 AM
Tempting

BHiggins
03-02-2021, 03:50 PM
Is this group buy still going on? If so I would like to sign up for a 2 Cav Brass HP 155 bb. My email is bhiggins @ bcahs (dot) com

Wasalmonslayer
03-04-2021, 09:36 AM
Is this group buy still going on? If so I would like to sign up for a 2 Cav Brass HP 155 bb. My email is bhiggins @ bcahs (dot) com

Your added

Thank you
WS

PSGCLTS
03-05-2021, 12:51 AM
Wasalmonslayer
you have my order down as 4 Cav Brass HP 147 FB. My original order thread #134 was 4 Cav Brass HP 155 BB can that be changed? or is that the same mold?

Thanks Bryan

soflarick
03-05-2021, 09:03 AM
Add me for 2 Cavity Brass HP: 95 euros , all pins, top punch and allen keys, 147 FB. soflarick at bellsouth .net

Wasalmonslayer
03-08-2021, 04:41 PM
Add me for 2 Cavity Brass HP: 95 euros , all pins, top punch and allen keys, 147 FB. soflarick at bellsouth .net

Added

Thank You
WS

Wasalmonslayer
03-08-2021, 04:43 PM
Wasalmonslayer
you have my order down as 4 Cav Brass HP 147 FB. My original order thread #134 was 4 Cav Brass HP 155 BB can that be changed? or is that the same mold?

Thanks Bryan

MY bad thanks for catching it!

Fixed up now have a good day!
WS

critt77matt
03-09-2021, 11:26 AM
put me down for one: 4 Cavity Brass HP: 135 euros , all pins, top punch and allen keys

critt77matt at yahoo dot com

Wasalmonslayer
03-12-2021, 12:21 AM
put me down for one: 4 Cavity Brass HP: 135 euros , all pins, top punch and allen keys

critt77matt at yahoo dot com

Have you listed down what base configurtion bb or fb??

Thanks
WS

critt77matt
03-12-2021, 06:30 PM
Have you listed down what base configurtion bb or fb??

Thanks
WS

sorry, bevel base 155 grain

Wasalmonslayer
03-14-2021, 01:58 AM
Got ya fixed up

Thanks
WS

ilium
03-18-2021, 04:11 AM
Please add with handles to my order. Thanks

DAFzipper
03-18-2021, 08:07 AM
1x 4 Cavity Brass HP, 155 bevel base
bad22inc at gmail dot com

Sent from my SM-T713 using Tapatalk

Wasalmonslayer
03-18-2021, 11:58 PM
Fixed up sorry for missing this
WS

Wasalmonslayer
03-18-2021, 11:59 PM
1x 4 Cavity Brass HP, 155 bevel base
bad22inc at gmail dot com

Sent from my SM-T713 using Tapatalk

Got you added Thanks
WS

jimmer
03-21-2021, 07:45 PM
1 X 4 Cav Brass HP 155 BB all pins, top punch & handles sheepdog8888@outlook dot com

Wasalmonslayer
03-22-2021, 12:20 AM
1 X 4 Cav Brass HP 155 BB all pins, top punch & handles sheepdog8888@outlook dot com

You are added

Thank you
WS

pack3480
03-24-2021, 01:11 AM
pack3480, dcasad(at)hotmail(dot)com, 1. one 4cav brass HP, BB with Handles
2. one 6 cav brass solid BB with Handles

DAFzipper
03-24-2021, 05:17 PM
If I saved a dollar a day since this started I could pay for 4 moulds and have change left over. LOL [emoji23]

Sent from my SM-T713 using Tapatalk

Wasalmonslayer
03-24-2021, 09:24 PM
Everybody knows going into these they take time.
For the value in hp molds it can’t be beat.
As dcasad(at)hotmail(dot)com the old saying goes Cheap, Fast, Quality you can pick any two at one time.
If it is cheap and fast it is not quality
If it is quality and fast it is not cheap
If it is cheap and quality it is not fast.

Let’s keep it rollin :drinks:

Mozz
03-26-2021, 05:10 AM
Could i order 2 Cavity Brass solid, machines mold, 155bb. DPM308 dot @gmail dot com

propwashp47
03-26-2021, 11:51 AM
please add me for 1 brass hp 4 cav 155 bb +all pins+handles and 1 brass 6 cav 147 fb +handles drichardson@austin.rr.com

Wasalmonslayer
03-28-2021, 11:07 AM
Got you guys added prop wash I had to modify your email so you dont get pfished and spammed

Thank You
WS

propwashp47
03-28-2021, 01:20 PM
thank you

rboeser
03-28-2021, 09:08 PM
I'm in for 1 of the 4 Cavity Brass HP: 135 euros , all pins, top punch and allen keys, and the handles. Email rboeser at at gmail dot dot com. Thank You, Ron

Wasalmonslayer
03-29-2021, 09:01 AM
I'm in for 1 of the 4 Cavity Brass HP: 135 euros , all pins, top punch and allen keys, and the handles. Email rboeser at at gmail dot dot com. Thank You, Ron

Got you added you did not specify 147 fb or 155 bb so I chose the more popular 155 bb let me know if this is not correct.

Thanks
WS

mhames
03-30-2021, 11:29 PM
Please sign me up for
markhames at me dot com - 155 BB, 2 Cavity Brass HP: 95 euros , all pins, top punch and allen keys

Wasalmonslayer
03-31-2021, 09:08 PM
You are added

Thanks
WS

starbits
04-02-2021, 07:29 PM
Sign me up for 4 Cavity Brass HP 155 BB: 135 euros , all pins, top punch and allen keys katy2kary at yahoo dot com

Explorer1
04-03-2021, 05:33 PM
Please add me for (1) 6 Cavity Solid Brass 95 euros , top punch and allen keys, 155bb.

rebirney-gmail

Wasalmonslayer
04-05-2021, 11:49 PM
Sign me up for 4 Cavity Brass HP 155 BB: 135 euros , all pins, top punch and allen keys katy2kary at yahoo dot com

You are added sir

Thank You
WS

Wasalmonslayer
04-05-2021, 11:52 PM
Please add me for (1) 6 Cavity Solid Brass 95 euros , top punch and allen keys, 155bb.

rebirney-gmail

I have you added please verify your email addy is does not look quite right.

Thanks
WS

sukivel
04-06-2021, 02:02 AM
I count over 120 pins on this buy, how far away are we on this one?


Sent from my iPhone using Tapatalk

Wasalmonslayer
04-06-2021, 01:12 PM
I count over 120 pins on this buy, how far away are we on this one?


Sent from my iPhone using Tapatalk

When the man that makes em says close it that’s what we do till then we just keep sippin coffee!

sukivel
04-06-2021, 01:49 PM
When the man that makes em says close it thats what we do till then we just keep sippin coffee!

[emoji15][emoji15][emoji15]☕️☕️☕️[emoji1689][emoji1303][emoji1689]


Sent from my iPhone using Tapatalk

Wasalmonslayer
04-06-2021, 02:16 PM
I count over 120 pins on this buy, how far away are we on this one?


Sent from my iPhone using Tapatalk

When the man that makes em says close it that’s what we do till then we just keep sippin coffee!

zymguy
04-06-2021, 11:21 PM
When the man that makes em says close it that’s what we do till then we just keep sippin coffee!

I havent participated in a buy for a while, will there be a last call?

archeryrob
04-07-2021, 09:33 AM
This has been running since 5/19? I'd gladly sign up for the 155 Hp 4 cavity BB if I know it would move to production any time soon. I signed up for notifications for the one below on his site and this might be the same mold if it comes with flat point and HP pins.



9 or 38, 147-154, Bevel base,HP, NO lube groove mold (multi choice) (11097-11099)Caliber (As cast): .357, Material: Brass, Number of cavities: 4 cavities at MP-molds

Wasalmonslayer
04-08-2021, 10:44 PM
I havent participated in a buy for a while, will there be a last call?

Yes sir there will be a last call.

WS

Wasalmonslayer
04-08-2021, 10:46 PM
This has been running since 5/19? I'd gladly sign up for the 155 Hp 4 cavity BB if I know it would move to production any time soon. I signed up for notifications for the one below on his site and this might be the same mold if it comes with flat point and HP pins.

Only place to get one is here and you will need to throw your name in the hat.
If you want to wait for an over run that is an option but if your name is in the hat you get exactly what you want no if ands or buts...

Have a good night! :)

archeryrob
04-09-2021, 04:44 AM
Ok, I am in, hope it goes soon, momma wants a larger mold and she aint got the patience I got.

archeryrob at gmail dot com - 4 Cav Brass HP 155 BB

kirb
04-09-2021, 08:57 PM
I am in 4 cavity brass hp flat base
Xp30br at g mail dot .com

Thanks
Kirb

Wasalmonslayer
04-12-2021, 11:41 PM
Got you guys added.

Thank you!
WS

archeryrob
04-14-2021, 07:46 AM
Actually can you edit mine to 147 as i plan to use in in 9mm and 155 is probably just a bit much

Burnt Fingers
04-14-2021, 11:24 AM
Actually can you edit mine to 147 as i plan to use in in 9mm and 155 is probably just a bit much

Not at all.

I use the NOE ELCO all the time in the solid version.

I just noticed I didn't say which I wanted. I'll take the heavy guy!

Rfeustel
04-16-2021, 09:28 PM
Hi
147 Solid Base FP
2 Cavity Brass
8 Cavity lee Aluminum
R f e u s t e l A T a t t DOT net
Thanks!

Wasalmonslayer
04-18-2021, 09:56 AM
Actually can you edit mine to 147 as i plan to use in in 9mm and 155 is probably just a bit much

Sure Thing will get you fixed up.

WS

Wasalmonslayer
04-18-2021, 10:33 AM
Website has a couple glitches and the mods are working on it.
Until they are fixed group buy changes are on a temporary stall.

Stand by it should not take to long to get us and rolling again.

Thank you
WS

NYBushBro
04-19-2021, 06:28 PM
Are we THERE yet???

Wasalmonslayer
04-21-2021, 01:04 AM
Not yet Miha has not called it.
You guys will be the first to know when he does :)

Wasalmonslayer
04-25-2021, 11:14 AM
Got you guys all fixed up please verify all is good.

Thanks
WS

klobbermeister
04-26-2021, 09:19 AM
In for one 4 cavity brass 155 bevel hp with handles please!

klobbermeister at ameritech dot net

Thanks kindly!

SMSgtBulldog
04-26-2021, 01:52 PM
8 cavity 155 bb w/handles
SMSgtBulldog at G male dot comm

Wasalmonslayer
04-27-2021, 03:36 PM
Got you guys added.

Thanks
WS

mvintx
04-28-2021, 07:59 PM
I'll get in on this if the 359,125/130 rerun is dead. Sent you a PM about it.

OK, I've thought about it. Can you switch me from the 359 125/130 over to this one?

6 cav brass, 147 FB, solid with handles. mvintx85 at yahoo dot com

jt1
05-02-2021, 08:31 AM
I'd like to get in on this one.

4 cav brass 147 hp

jtedder at nctv dot com

Thanks!

sewerman68
05-03-2021, 10:12 PM
8 cavity 155 solid please
toddtheplumberz at gmail.com

Burnt Fingers
05-04-2021, 12:50 PM
I'm starting to think that Miha is so busy that he doesn't have the time to cut the group buy molds.

He's hardly got anything in stock on his web page.

Wasalmonslayer
05-04-2021, 03:29 PM
I'm starting to think that Miha is so busy that he doesn't have the time to cut the group buy molds.

He's hardly got anything in stock on his web page.

He is just like everyone else in the gun world right now as soon as he makes it people buy it.
No one is immune to this stupid time we are in right now.

I am in the boat world and it is just as bad if not worse for hard parts and accessories.
I have boats down all over that we cannot get parts to fix and our manufactures are running three shifts!

Wasalmonslayer
05-04-2021, 03:38 PM
Got you guys all added.

Thanks
WS

badwolf
05-09-2021, 05:57 AM
6 cavity brass solid bb 155 gr .357 badwolf dot db at gmail dot com

Wasalmonslayer
05-12-2021, 06:26 PM
6 cavity brass solid bb 155 gr .357 badwolf dot db at gmail dot com

Got you added sir the only way it will be cut is at .359

Thanks
Max

GlocksareGood
05-16-2021, 07:22 PM
Put me down for a 4 cavity brass hp with all pins.
eebigredclifford at gmail dot comm

Wasalmonslayer
05-17-2021, 03:45 PM
Put me down for a 4 cavity brass hp with all pins.
eebigredclifford at gmail dot comm

Got you added on this one.
You did not specify fb or bb.
I added you as bb if that’s not right please let me know.

Thanks
WS

Burnt Fingers
05-18-2021, 12:11 PM
Got you added on this one.
You did not specify fb or bb.
I added you as bb if that’s not right please let me know.

Thanks
WS

BB is what I wanted.

Thanks!

Hey Miha!!!!! I'm ready for this mold!

archeryrob
06-01-2021, 07:16 AM
I couldn't wait anymore. I got so many empty 9mm cases I just ordered the RP BB in 147 gr from his site to make some heavy target rounds. I'll use this one for defense rounds.

[EDIT] Damn, Miha's fast. I got an Order confirmation e-mail at 7:13AM and a Order complete e-mail at 7:26 and Fedex Label created at 7:29

Txcowboy52
06-05-2021, 03:21 PM
Put me down for a 4 cavity bevel base brass hollow point mold , please sir! ricky_taylor62ATyaHooodotcom

rancher1913
06-05-2021, 06:01 PM
put me down for two

4 Cavity Brass HP: 135 euros , all pins, top punch and allen keys

6 Cavity Solid Brass 95 euros , top punch and allen keys

rancher1913atyahoodotcom

DAFzipper
06-13-2021, 08:34 PM
Please remove me from your list.
28) bad22inc at gmail dot com - 4 Cav Brass HP 155 BB

Sent from my SM-T713 using Tapatalk

bushog
06-21-2021, 07:26 PM
Please add me for:

One 4 Cavity Brass HP 150gn

and

One 8 cavity aluminum Lee Style solid 150gn

Thanks!

boo-haaa at hot maildot com

Wasalmonslayer
06-24-2021, 11:39 PM
Got all list mods done please inspect for errors please

Thanks
WS

Wasalmonslayer
06-24-2021, 11:40 PM
put me down for two

4 Cavity Brass HP: 135 euros , all pins, top punch and allen keys

6 Cavity Solid Brass 95 euros , top punch and allen keys

rancher1913atyahoodotcom

Rancher what design do you want 147 flat base or 155 bevel

Thanks
WS

ryanmattes
06-26-2021, 05:52 PM
Please sign me up for a 4 Cavity Brass .359 HP 147g bevel base with handles

ryanmattes@gmail.com

135 euros is about $165 or thereabouts, right?I asked for the BB w/ handles, but I'm listed as FB without handles.

Any kind of guess at an ETA on this one?

Ryan

Sent from my Pixel 3a using Tapatalk

Wasalmonslayer
07-02-2021, 12:26 AM
I asked for the BB w/ handles, but I'm listed as FB without handles.

Any kind of guess at an ETA on this one?

Ryan

Sent from my Pixel 3a using Tapatalk

Got you fixed up thanks for catching it!

WS

propwashp47
07-15-2021, 11:12 AM
please remove me from this buy

NYBushBro
07-20-2021, 04:32 PM
Thanks!

Hey Miha!!!!! I'm ready for this mold!


+1 What HE said...!

btr-cj
07-26-2021, 02:02 PM
I'm in.
2 Cav HP, NLG, 147 FB

btrDASHcjAtCoxDOTnet

Wasalmonslayer
07-27-2021, 08:42 PM
I'm in.
2 Cav HP, NLG, 147 FB

btrDASHcjAtCoxDOTnet

Got you added.

Thanks
WS

Wasalmonslayer
07-27-2021, 08:42 PM
please remove me from this buy

What is your email addy so I do not have to search 10 pages for it.

Thanks
WS

Burnt Fingers
08-01-2021, 12:46 PM
Is Miha doing any group buy molds????

This group buy is now over two years old. We have plenty of people wanting the mold. Hollowpoint pin numbers are covered.

What's it going to take to get this done?

btr-cj
08-01-2021, 05:52 PM
I'm in.
2 Cav HP, NLG, 147 FB

btrDASHcjAtCoxDOTnet

Need to take the DASH out off my Email addy. new one does not have it.
Thanks,

jayjay1
08-02-2021, 06:07 PM
I would like a 155 BB 6 cav. brass, but what is the diameter?

359, 357, one writes he is happy to get it in 356.
For a coated bullet .356 would be gtg for a 9mm.

Can I choose or is the diameter set now?

Burnt Fingers
08-03-2021, 12:45 PM
I would like a 155 BB 6 cav. brass, but what is the diameter?

359, 357, one writes he is happy to get it in 356.
For a coated bullet .356 would be gtg for a 9mm.

Can I choose or is the diameter set now?

Diameter is set. You can always size them down. It's pretty hard to size them up.

jayjay1
08-06-2021, 07:35 AM
Well, you can squeeze bullets until they are square, but that dont help the accuracy.

So it is .359, right?

archeryrob
08-06-2021, 10:28 AM
Is this not the same mold and already in stock?
https://www.mp-molds.com/product/9mm-38-147-154-bevel-basehollow-point-no-lube-groove-multi-choice/

So 66 people signed up and we need to wait for another 34 so sign up for this to go hot? It took over a year to get 66 and demand is going to diminish as most interested are signed up already.

Burnt Fingers
08-06-2021, 12:25 PM
Well, you can squeeze bullets until they are square, but that dont help the accuracy.

So it is .359, right?

Just as the original post states. It's .359

zeljohn
08-12-2021, 03:44 PM
Please add me to this group buy.

zeljohnatcenturylinkdotnet 8 Cav Aluminum .359 155 bb

Wasalmonslayer
08-14-2021, 02:39 PM
Is Miha doing any group buy molds????

This group buy is now over two years old. We have plenty of people wanting the mold. Hollowpoint pin numbers are covered.

What's it going to take to get this done?

Miha having time to process them just like everything else in this world that is back ordered.........

If you are in business you know what I am talking about everything is hard to get and taking way longer to aquire than usual

Wasalmonslayer
08-14-2021, 02:40 PM
Please add me to this group buy.

zeljohnatcenturylinkdotnet 8 Cav Aluminum .359 155 bb

You are added

Thanks
WS

Wasalmonslayer
08-14-2021, 02:42 PM
I would like a 155 BB 6 cav. brass, but what is the diameter?

359, 357, one writes he is happy to get it in 356.
For a coated bullet .356 would be gtg for a 9mm.

Can I choose or is the diameter set now?

Bullet diameter is set now you just pick hp or solid and how many cavities.
The last few runs with multiple dimensions added a lot of headaches for Miha and orders were difficult to keep straight.
Most everyone sizes so you pic a little large and squeeze them to the right diameter easy peezy.

Thanks
WS

Valley-Shooter
09-05-2021, 02:04 AM
Diameter is set. You can always size them down. It's pretty hard to size them up.Actually, since they are getting powder coated/ Hi-Tek coated it can be coated up.

It would better to pick the middle size rather than the maximum size for everyone to use. You also might get more to join this group buy.


Maybe this discussion will get more people involved and un-stall this group buy.

Sent from my Pixel 4 XL using Tapatalk

Burnt Fingers
09-28-2021, 11:15 AM
Actually, since they are getting powder coated/ Hi-Tek coated it can be coated up.

It would better to pick the middle size rather than the maximum size for everyone to use. You also might get more to join this group buy.


Maybe this discussion will get more people involved and un-stall this group buy.

Sent from my Pixel 4 XL using Tapatalk

The only thing that's stalled about this buy is on the supply end.

archeryrob
02-15-2022, 12:40 PM
Remove me from this. I was able to order what I needed from MP and was not worried about this discount.

justindad
02-21-2022, 09:43 PM
I’ll get in.

4 Cav Brass HP 155 BB with handles

justindad (at) protonmail (dot) com

sukivel
02-27-2022, 07:58 AM
I need removed from this as well. I bought a different mold already in stock.

Kawacharles
03-12-2022, 10:05 AM
I'm in:

kawacharles1973(at)gmail(dot)com

4 Cav Brass HP 155 BB

mpkunz607
03-15-2022, 03:23 PM
I'm in on that. I can always resize down. Its been ~months~ and I would really like to get a mould.

Wasalmonslayer
03-15-2022, 03:37 PM
Everyone one that wanted added is done guys that want to bow our please supply me with your email address so I do not have to search 11 pages of the buy to find your address.

Thank You
WS

sukivel
03-16-2022, 12:43 AM
I need removed from this as well. I bought a different mold already in stock.

Inkgardener at gmail


Sent from my iPhone using Tapatalk

jmcghee
03-16-2022, 11:27 PM
Please remove me thanks Jim jamesallen1954@gmail.com

justindad
04-05-2022, 09:00 PM
Please remove me. I’m #44 on the HP list.

mrmachinist
04-06-2022, 12:05 AM
I want this mold but Im tired of waiting for the Gb. Any idea if this will ever go through?

Wasalmonslayer


Sent from my iPhone using Tapatalk

Wasalmonslayer
04-10-2022, 01:26 AM
Got you guys removed and sent a PM to mrmachinist.

Thanks
WS

Shua
04-15-2022, 11:10 AM
4 cav brass HP please. Peeeeebeeeslingeratprotonmaildotcom

Wasalmonslayer
04-17-2022, 01:18 AM
4 cav brass HP please. Peeeeebeeeslingeratprotonmaildotcom

Got you added in spot 13 on the hp list.

You did not call out fb or bb so I did fb let me know if you want something different.

Thanks
WS

Wasalmonslayer
04-30-2022, 10:46 AM
Hello Guys

I have a spare one of these molds in 359 154 4 Cav bevel base Hollow point I just put up for sale if anyone wants to beat the wait.

WS

mrmachinist
04-30-2022, 05:26 PM
Wasalmonslayer

Please remove me from the lis #18 on the hp list. I picked up a similar mold already.


Sent from my iPhone using Tapatalk

johnsonian09
05-01-2022, 03:17 PM
Still can sign up?

Brass 4 cavity HP/ BB @ .359

Ij2022@ proton m@1L dot com


Sent from my iPhone using Tapatalk

Wasalmonslayer
06-12-2022, 09:53 AM
Got you guys fixed up johnsonian you are in the 18 spot now.

Thanks
WS