View Full Version : Lee 6 cavity Mold help
Mr Peabody
04-27-2019, 11:51 PM
I'd like to put set screws against the sprue plate pivot bolt and sprue plate stop bolt. What size would you recommend for the set screws?
Larry Gibson
04-28-2019, 10:24 AM
8x4 or 8x36
Mr Peabody
04-28-2019, 11:06 AM
Thanks Larry
Conditor22
04-28-2019, 01:02 PM
http://www.castpics.net/subsite2/MoldMods/LeementingKitDocumentation.pdf
Dragonheart
04-28-2019, 01:16 PM
H&G molds used a #10X32 thread size for the sets and those have worked well for longer than I am old.
I would suggest a Socket Set Screw Cup Point 304 Stainless Steel - 10/32 x whatever length that fits, probably something in the neighborhood of 1/4" . A 3/32" hex wrench should fit. Inserting a small lead shot against the main screw will help in keeping the set tight and protect the threads. I would also suggest a little anti seize compound on all the threads. I use the stuff that has copper in it.
Mr Peabody
04-29-2019, 04:30 PM
Thanks for the good help guys
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.