Lee ABLP mounting bolt pattern

[C.F.Plinker]

I am thinking of getting an ABLP to go along with my Lee Classic Cast single stage press. I am wondering if the pattern of the mounting bolts is the same for both presses so I can use the same holes in the bench for both. Can someone measure the pattern for their ABLP? FYI the pattern on the Classic Cast has the holes closest to the edge of the bench 4" apart with the third hole centered between them and 2 - 13/16" further away from the edge of the bench. Thanks.

[onelight]

The bolt patterns are not the same the ABLP has a smaller footprint.
Have you considered a lee bench plate? It holds the press securely Easy to switch presses.

[Black Jaque Janaviac]

Just go here. Print off the sheet as "actual size", do not select "fit to paper".

In STEP 1 you'll see a dotted line and bolt-hole pattern for the Breech Lock Pro.

https://leeprecision.com/cgi-data/instruct/PR2679.pdf

[onelight]

I
Just go here. Print off the sheet as "actual size", do not select "fit to paper".

In STEP 1 you'll see a dotted line and bolt-hole pattern for the Breech Lock Pro.


https://leeprecision.com/cgi-data/instruct/PR2679.pdf
Nice , I didn’t know that was there.