Winchester 94 Angle Eject

[terrytm]

Hi:

The LGS has a Winchester 94 Angle Eject in excellent shape.

He is asking $450.00.

I have never owner one and would know if there were any problums with them?

Thanks,

Terryt

[maxreloader]

I owned one for a brief period of time in 44 mag and it was a fine rifle. It went on down the road pretty quick because I'm not a huge fan of rifles chambered in pistol calibers. I never had any issues to speak of and I shot cast boolits and commercial ammo without a problem.

[GhostHawk]

I have one in .30-30, no issues with it at all.

Some don't like the safety. If you don't it is very easy to remove if you like.
Does not bother me at all.

[modified5]

I have an AE from 1982 so no safety, but I love the thing.
I am going to scope it for my son for his first deer season this year. It is the one he wants to take his first deer with. He loves lever guns.
I have had no problems since I bought mine 10 years ago from a guy for $200.

[Bazoo]

The later models had issues with light hammer strikes. It can be solved by modifying the hammer strut or using an older ae's strut.

If it's a safety model and you don't like the safety, you can do like I did, remove it, grind the left side off so it sets flush when "off". You can still put the safety on with a bullet nose, key, or similar, but no chance of it being bumped on accidentally.

[robg]

I've a 357 mag with cross bolt safety .ejectors are breakable otherwise no problems .a lighter hammer spring and a bit of polishing and the rebounding trigger is much improved ,bought mine new in 98 has had thousands of rounds through it .

[ShooterAZ]

I have a 30-30 pre-safety as well. It's a great shooter with cast boolits.

[15meter]

I had a pre-safety Trapper AE in 45 Colt I used to use for cowboy shooting. I used 45 Schofield in it because the magazine only held 9. I could get 10 Schofields in it. Traded it to a buddy for a Remington 700 Classic in 221 Fireball. He wanted the Trapper for his grandson's first deer rifle. He passed away before the grandson was old enough to use it. Always wondered where that rifle ended up at. I'm pretty sure Mom dumped it as soon as she could just to get the cash.

Always liked that rifle.

[Walks]

I have a pre safety model in .44Mag, 20" bbl. A special run for Big 5 Sporting Goods in 1987. Just in time for my start in Cowboy Shooting.

Never had it worked on, never had to. Did change the sights to a 3/32" brass bead & full Buckhorn rear.

Very few folks use them around here for Cowboy Shooting. Most have switched to Italian 1873's or 1866's. Some still use the 1892 copies, Italian or Brazilian. And the lucky have old Marlins.

There are a few you-tube videos on maintenance disassembly/reassembly.

The American made 94 is a great gun. Regardless of Pre-64, Post-64 or USRAC.

[Greg S]

Pre-safety fetches alittle more money as well as a trapper (16"). The rifles handle pistol calibers OK but not as smoothly as 92s which are also stronger. Had a 94ae Trapper in 45 Colt which was pretty smooth after some work but it went down the road when I upgraded to an 1892 take down octagonal trapper in 45 for use ith Buffalo Bore's 325 rocks n dynomite loads.

[AllanD]

Contrary to some that claim differently the 94 AE's marked the return of all forged milled receivers.

Some idiot on the 30-30 Winchester group( on FB) tried to tell me that they returned to milled steel receivers around 1972, but the freckled bluing and the reddish undertone of the receiver of my 1973 production rifle says he is full of night soil.

The ONLY top eject post-64 Winchester 94's that had real STEEL receivers were the early "Big Bores".
And those were only sold chambered in 307Win, 356Win and 375Win...

Generally speaking the post 64 Top-Eject rifles aren't "bad" rifles, but the pre-64's and the angle eject are BETTER rifles

And you will be pleased to discover it already drilled for scope mounts...

[Longknife]

Yeah I am having problems with my "like new" 94ae, 357 mag. see other thread,,,,,,

[FergusonTO35]

$450.00 is high unless it is NIB or a rare model. Many of these rifles left the factory with irritating defects such as canted sights, loose actions, and terrible wood to metal fit. I would look at it closely and if you observe any of these, bargain for a much lower price.

[Bazoo]

300 is bout what they bring round here. Bout what a post 64 with finish wear goes for too. That's what I gave for my 1970 model atleast.

[FergusonTO35]

Yes, $300.00 is about right for average condition. I gave $375.00 for one in very nice shape made the year I was born, $200.00 for another that was perfectly functional but looked like it spent it's life sliding around in a truck bed.

[Bazoo]

My 70 made 94 has the finish problems associated with the receiver. The rest is in pretty good shape though. I like a little character, but always have in the back of my mind the picture I seen of a 94 from that era that had the receiver hard chromed and it was a nice looking rifle.

[EVR]

Can't comment on the price but I've owned three. 2 .30-30's and the .44 Paratrooper 94. One of the .30-30's had a feeding problem. The other 2 were/are good.

I've had the .44 for many years. Has been with me on many adventures.

https://i.postimg.cc/G2K1tPDk/2-Yote-Snared-F.jpg

https://i.postimg.cc/nhcCjnvJ/2-Yote-Snared-D.jpg

https://i.postimg.cc/c1zbm5dv/para2.jpg

[Bazoo]

Evr, that's an unusual stock. Could you give some details on it.

[EVR]

Evr, that's an unusual stock. Could you give some details on it.

Special run by Winchester commissioned by the 101st Airborne back in the mid-90's. Needed something with a little more oomph than the 5.56 carbines.

:-P

Actually, I made it. Folds and/or can be rigidly attached with addition of one bolt. Works great. Shaped flat iron with a walnut cheekpiece.

https://i.postimg.cc/zGCYrhLD/DBear-Huntv.jpg

https://i.postimg.cc/2660dnJd/para6.jpg

https://i.postimg.cc/7ZHRBFmx/2-Yote-Snared-B.jpg

[FergusonTO35]

Very nice!!

[Bazoo]

Paratrooper 30-30 model eh?

Thanks for sharing. How do you use the double sling swivel studs? I see you have a saddle ring. Is it just so you have a different option or do you have a specific purpose.

[EVR]

Paratrooper 30-30 model eh?

Thanks for sharing. How do you use the double sling swivel studs? I see you have a saddle ring. Is it just so you have a different option or do you have a specific purpose.

You got it. Extra slinging options. I carry it on the horse in a scabbard and also between my shoulder blades while skiing "biathlon" style in a sling adapter I made that handles all standard sling swivels mounted under the fore-arem/barrel. I removed the ring.

[terrytm]

Thanks to all of you.

I got it for #325.00 and it is in great shape.

Terryt

[Bazoo]

Terryt, awesome man. Sounds like a good price. Love to see some pictures.