mdevlin53
04-08-2019, 01:58 PM
I need a Lee 311-93-1R mold. I really jut need the mold blocks and the sprue plate and only one cavity. I am trying to make a hollow base jig for my 32 colt rifle. Cant find a mold or cast bullets so i an going to try making some myself. I can size down the 311-93-1R to .299 and it will load and cycle in my Marlin 1892 but i suspect that with the flat base it is not going to perform well. I think i could drill out the base and get better bump up. If anyone has said mold with a least one cavity in good shape please let me know. If all else fails i could just spend the 21 bucks on a new one.
Thanks for looking
Michael
ps
I did buy a heeled mold form accurate but the nose is to flat to cycle in the lever gun. woks fine in the falling block.
Thanks for looking
Michael
ps
I did buy a heeled mold form accurate but the nose is to flat to cycle in the lever gun. woks fine in the falling block.