PDA

View Full Version : Getting my son's rifle ready for his hunt.



idahoron
10-19-2008, 08:37 PM
Today I took my son and his TC Renegade out to shoot. His load is a bullet I make for paper patching. It is a Lee C-501-440-RF. When I pour them out of pure lead they are 456 grains, and I call them the Moose Maulers. I load them Paper Patched with 80 grains of Pyrodex P, and a home made wool over powder wad lubed with Hornady Great plains lube. This load has proved to shoot Sub 2” groups at 100 yards.
His sights are Lyman 57 SML peep sights. I took off the scale off the side that is used to set the sight. I heavily scribed the settings for 50, 100, 150, and 200 yards. I painted them white and left the marks between them black. So if I want to set it to 75 yards it is the black line between the white 50 and the white 100 yard marks. This picture was before I painted the hash marks for my yardage.

http://i223.photobucket.com/albums/dd294/idahoron/Rearsight2.jpg


Well I loaded the rife and shot the first round. The target was a milk jug at 150 yards. I had about a 10 MPH wind from about the 8:00 position. I held about 4” to 5” to the left Shooting from my home made Cross sticks.

http://i223.photobucket.com/albums/dd294/idahoron/150yard1.jpg


After that I cleaned it and gave it to my son Jacob. He loaded it and took on the 75 yard jug and it died. The impact was so violent I could not get a good picture of the bullet entrance. His next shot was at 100 yards and this hit just grazed the jug and dumped out the water. He was also shooting off of my cross sticks.
He has a any weapon doe hunt that opens next month. His goal is to shoot one with this rifle. We have a few more weekends to practice but I think he will be ready, I know the rifle is. Ron