PDA

View Full Version : Need a load for VV N310 for 230 RNL .45



Aeolus
10-19-2008, 04:50 PM
I have 12 lbs of Vihta Vuori N310 and a Master Caster set up for RNL 230 .45 so it will take weeks to swap out molds to a 200 SWCL. Any ideas? It feels like it should be safe in the 4.5 to 5.0 range but I'm a newbie. For Wilson 1911.

felix
10-19-2008, 05:09 PM
Use circa 4.0 grains instead. Your loads shown are about right for N320, not N310. ... felix

Aeolus
10-19-2008, 07:01 PM
Thank you!