WTB/WTT FOR 32ACP Dies/Mold

[sigep1764]

Would like to trade for 32ACP dies and a mold in the 70-78 grain range.
Items for trade:
2 Glock brand G19 mags
Lyman 280413? Spire Point mold
Small quantities of 45ACP, 50AE, and 308 brass
Cast Boolits-358 Elco hollowpoint sized to 358
Lee 356-105 swc sized 358
Lee 356-95RF sized 357
MP 227-75 NATO sized 225 and checked
Lyman 280468 sized 280 and checked
Lee 277-135 sized 280 and checked

[RED BEAR]

You might try ebay for a cheap set. Midway has the lee carbide for $33 . I bought an older rcbs set off ebay for $16.

[sigep1764]

This is true, but I would rather give money or these things I am not using to someone here on the forum first before I try ebay.

[RogerDat]

NOE has a tumble lube ranch dog 32 ACP mold in that weight range. Nice mold and bullet design (RFN) only downside is COAL has to be found that will feed reliably from magazine without too much slop that allows the stacked case heads to lock due to excessive front to back free space. Once one has that dimension it is smooth sailing.

[sigep1764]

Friday bump

[sigep1764]

One more bump