View Full Version : RCBS benchtop Primer tube anti bounce mod
Conditor22
03-27-2019, 08:56 PM
Got tired of the primer tube bouncing so much so I drilled in 2 dowels and rubberbanded a piece of foam rubber to deaden the bounce
https://i.imgur.com/ETZoduj.jpg
https://i.imgur.com/13Qyjk0.jpg
Rattlesnake Charlie
03-27-2019, 08:59 PM
Did it fix the problem?
I like simple fixes. This looks like one that might work.
Conditor22
03-27-2019, 09:15 PM
It really helps, I would recommend larger dowels because the dowels "bounce" a little :groner:
slughammer
03-28-2019, 12:55 AM
I have large and small tubes that hold a little over 50 primers. 50 is plenty of primers for my rifle batches and there is a lot less flopping. Pleasure to use.
OS OK
03-28-2019, 11:41 AM
Jim, you must'a missed your calling...your a...re-engineer-er...good fix for an annoying problem!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.