Has anyone had any experience With NO 1 Remmingon rolling Block

[gcollins]

I bought a barreled acton from a guy, when it got here, everything was okay except he didn't send the extractor for, when we made the deal he sent me lots of pic's and one of them was of the extractor he said I had to fit, know he has lost it? I can't make a new one with out something to go buy!
If any of you guys a working on a R.R.B. and have it tore a part, a picture with some sizes would be nice,or I would pay someone to make me one.The slot is allready cut into the barrel.
Thanks for your time
Greg

[missionary5155]

Greetings You can go to Google and type in Rolling Block parts. You can go to Single Shot Rifle thread (here) and find the Rolling Block parts lists.
The Rolling Block had two types of extractors... a sliding lever type and a rolling type that rolled with the block. If you barrel has on the left chamber sdie a slot that is cut into the chanber wall then you need the sliding type...

[John Taylor]

There are several kinds of extractors for the RRB. http://www.wisnersinc.com/rifles/remington/roll_block.html has the rotating type. There are 2 sliding type that I know of, might be more. I have made the sliding type but would need your gun to fit it.

[dukers65]

what caliber were you going build? i got a buffalo hunter built on rem. rb action,
i'd like to sell or possibly trade. it has a numrich 28" barrel made from 4140 chrome moly steel, a pedersoli tang sight(less expensive one) and a globe front sight with inserts. email drd5050@aol.com

[hiram]

http://www.e-gunparts.com/

http://www.ssfirearms.com/

[Dutchman]

http://rollingblockparts.com/

Tell Ken Womak the Swedish rolling block Dutchman sent you.
http://dutchman.rebooty.com/rb.html


While you're at it, go over this page:
http://dutchman.rebooty.com/RBfailure.html
Catastrophic Failures of Rolling Block Rifles

Dutch