PDA

View Full Version : Herter's Model 27 Press



Pressman
03-16-2019, 08:27 PM
Introduced in 1955 as a companion press for the Lyman 310 “Nutcracker” tool, the Model 27 is a neat little press with some innovative features. I say little press because it is literally a 1/3 scale model of the famous Model 3. Shipping weight is only 6 pounds while the Model 3 shipped at 23 pounds.

The size and strength of the Model 27 is near perfect when used with Lyman 310 dies or Herter’s Universal Neck Sizing Die. According to Herter’s literature it makes the “Nutcracker” completely obsolete. There is also a caution in the Herter’s catalog about not using the Model 27 for full length resizing. The press is all aluminum with the handle being the weakest point. It will break before the leg does. Of course owners of the Model 27 payed no attention to Herter's instructions and used the press for everyday reloading resulting in a lot of broken handles and the bottom leg. After all the press is threaded for 7/8-14 dies. It also uses the threaded shellholder and ram prime system of the Model 3A and the Model 9A.

I really like this smaller press for neck sizing and seating; it just seems the press is a lot easier to use, plus it provides better feel than the larger, full size presses. I wish someone still made a press like this one, it is nearly ideal for loading at the range.

The press is tapped for 7/8-14 dies and requires an adapter, available from Herter’s, to use 310 dies. It uses a unique shellholder that threads both onto the ram and into the die station. When inserted into the die station a primer post is threaded into the end of the ram for priming cases. This is the first ram prime system that I an aware of and it is a good one. The ram is smaller in diameter than the Pacific-type and therefore not interchangeable.

There are two versions of the Model 27, the original model with a green anodized finish and all aluminum construction was made until 1959 when it was replaced with the Model 27A, a stronger version of cast iron wearing the traditional Herter's brown paint. Notice the longer and strongly reinforced handle. This one is cast iron and is in new condition. Finding an aluminum 27 that has not suffered a broken frame or has a cast iron replacement handle is difficult today.

Price new in 1955 was $8.75. It was dropped from the catalog after 1961.

238124

238125

380AUTO
03-16-2019, 08:57 PM
That’s cool I love old things

.50bmg
03-16-2019, 09:36 PM
Awsome bit of Herters history. Thanks Ken!

LUBEDUDE
03-16-2019, 11:42 PM
Great information, thanks Ken!

jimkim
03-17-2019, 06:50 PM
I love it! Thanks!

Sent from my VS880 using Tapatalk

Green Frog
03-20-2019, 10:03 AM
Ken,

I’d love to see an image of the press with some item of known size next to it. The design is so perfectly scaled that without such size reference, it just looks like any other C type press!

BTW, what was the weight of the later, cast iron version? At the reduced size, I’m guessing it would still be reasonable. Now I’ve got to start looking for one for myself. You know how I love my 310 stuff!

Froggie

danomano
03-20-2019, 10:55 AM
That's a Dandy! Thanks for sharing

Pressman
03-20-2019, 09:27 PM
Mr Frog Person Sir, I don't have access to the presses right now, still hiding in Texas waiting for the start of mosquito season to return to Minnesota.

The cast iron press is light and should be very handy to load on. I really need to set it up and try it.

Ken

.50bmg
03-20-2019, 10:47 PM
https://uploads.tapatalk-cdn.com/20190321/9e547176d77f8f4bb9789d8ff04c0bcb.jpghttps://uploads.tapatalk-cdn.com/20190321/804e830533e729cc58226c8d703cb12a.jpghttps://uploads.tapatalk-cdn.com/20190321/6f58be5068b227765622be11c1d14cb8.jpg

Here’s mine and some pics for size comparison.


Sent from my iPhone using Tapatalk

Pressman
03-20-2019, 10:58 PM
Great comparison, thank you.

Green Frog
05-09-2019, 12:07 PM
I've gotta check this page more often! Nice pix, .50bmg! That really is a cute little thing, isn't it? The word "petite" even comes to mind.

Froggie

Bazoo
05-09-2019, 04:43 PM
How did the cast iron version hold up to full size reloading? Pretty neat, thanks for sharing.

MT Chambers
05-15-2019, 04:43 PM
I believe it was the "finest press ever made".

Green Frog
06-02-2019, 02:28 PM
I’ve come back and looked at this press again and the wait did me no good. I STILL WANT ONE!!! :killingpc

There is absolutely no logical or practical reason to have one of those presses today except for the fact that they are just so darn cute!!. I don’t suppose anyone knows of an orphan lurking around somewhere unloved, do they? It could snuggle up next to it’s bigger sibling the Super U and have a happy home. :D

That’s the problem with this forum, all the esoterica that shows up and catches my Froggie eye like so many flies. It’s getting to be time for an intervention (or a bigger loading bench. [smilie=l: )

Froggie

3006guns
06-03-2019, 11:02 PM
I have a small C press that I bought used back around 1971. The throat is too small for anything but pistol rounds or the .30 carbine. I was baffled as to who the maker was, since the only identification were the raised letters "P R" cast into the frame. It's a beautifully made thing and processed hundreds (thousands?) of .38 special rounds when I first began reloading.

Pressman came to my rescue, identifying it as a "Precision Reloader" made in a small garage sized shop in Oroville, California. Ironically, RCBS is just down the road and RCBS owner Fred Huntington had never heard of it!

Thanks again Pressman for some entertaining education!

Bazoo
06-03-2019, 11:18 PM
I have a small C press that I bought used back around 1971. The throat is too small for anything but pistol rounds or the .30 carbine. I was baffled as to who the maker was, since the only identification were the raised letters "P R" cast into the frame. It's a beautifully made thing and processed hundreds (thousands?) of .38 special rounds when I first began reloading.

Pressman came to my rescue, identifying it as a "Precision Reloader" made in a small garage sized shop in Oroville, California. Ironically, RCBS is just down the road and RCBS owner Fred Huntington had never heard of it!

Thanks again Pressman for some entertaining education!

I'd love to see pictures of it.