db2
12-05-2005, 11:51 PM
Chargar, I want to thank you first for taking on this group buy.
These are my results:
This is my goto mix 75% range 25% lino
nose dia body dia
1) .299-.2988 .3143-.3152
2) .300-.3004 .3145-.3154
3) .300-.300 .3143-.3155
4) .3005-.3009 .315-.3165
5) .2985-.300 .3145-.3159
6) * *
* I hate to admit this, I dropped that one as I was measureing.
wt 169.5, 169.5, 169.6, 170.6, 169.3
Lino (used)
1) .2994-.3003 .3147-.3146
2) .299-.3001 .3144-315
3) .2994-.2999 .3136-.3144
4) .3003-.300 .3138-.3146
5) .300-.2998 .3139-.3143
6) .2994-.2998 .3146-.3145
wt 163.5, 163.4, 163.3, 163.5, 163.5, 163.7
My thoughts on this, Over all I am very pleased with is mold. This is the first time I have ever messed with a Loverin style. When the mold reached temp, the bullets were kinda hard to leave the mold (it took a few raps). Hornaday gas check is a snug slip on fit. Next week I hope to have time to work on some loads.
db2
These are my results:
This is my goto mix 75% range 25% lino
nose dia body dia
1) .299-.2988 .3143-.3152
2) .300-.3004 .3145-.3154
3) .300-.300 .3143-.3155
4) .3005-.3009 .315-.3165
5) .2985-.300 .3145-.3159
6) * *
* I hate to admit this, I dropped that one as I was measureing.
wt 169.5, 169.5, 169.6, 170.6, 169.3
Lino (used)
1) .2994-.3003 .3147-.3146
2) .299-.3001 .3144-315
3) .2994-.2999 .3136-.3144
4) .3003-.300 .3138-.3146
5) .300-.2998 .3139-.3143
6) .2994-.2998 .3146-.3145
wt 163.5, 163.4, 163.3, 163.5, 163.5, 163.7
My thoughts on this, Over all I am very pleased with is mold. This is the first time I have ever messed with a Loverin style. When the mold reached temp, the bullets were kinda hard to leave the mold (it took a few raps). Hornaday gas check is a snug slip on fit. Next week I hope to have time to work on some loads.
db2