Bullet for Danish Rolling Block 12.7 x 44r

[Buzzard II]

Hi,
Does anyone know if the RCBS bullet mold 50-340 swc 50 action express .(500 diameter) 340 grain semi wad cutter will drop a bullet for the Danish Rolling Block 12.7 x 44r. Also, which brass works best. Thanks , Bob

[Mr Hanssen]

Are you sure it is danish? As far as i know, they used a 45 cal cartridge.
Norway and Sweden used the 12 mm Remington

[Tom Herman]

Try this thread here: http://castboolits.gunloads.com/showthread.php?131610-Swedish-Roller-12-7-x-44mm
Best of luck! I would like to play with a 12.7 Swede someday myself...

-Tom

[vagrantviking]

I'm pretty sure that you want something .510-.515 for the 12.7mm.
Slug the gun and it will tell you.

[enfield]

I size mine to .510

[Ed in North Texas]

For my Swede I use a Lyman 509134 RN 360 grain mould which drops at .511 with soft lead.

[salpal48]

I have several RB in 12.7x44R I found .509/ 510 work well . . i have also use .515 /50/70 50 Alaskan works well. although the Rim size vary. 2 of Mine Take the case without problem The other 2 the rims are tight or will not close. But again a Good choice