PDA

View Full Version : 44-40 Uberti Revolver powder?



barnabus
02-23-2019, 07:52 PM
I have a Uberti 44-40 Smokewagon that will be here Monday.I have ordered Starline brass,RCBS Cowboy dies and RCBS 200 grain cowboy bullet mould. what powders are would you recommend or have experience with? Anybody use Trail boss?

Love Life
02-23-2019, 07:57 PM
Holy black!!

barnabus
02-23-2019, 08:08 PM
Holy black!!

thanks but i have enough black powder stuff to clean.

Gray Fox
02-23-2019, 08:14 PM
Win 231 with that boolit or Universal Clays have worked well for me. The latter shoots much cleaner. GF

rintinglen
02-24-2019, 10:30 AM
Red Dot, 5.5 grains, 200 grain boolit equals much good.

Froogal
02-24-2019, 10:56 AM
Unique works very well in my.45 Colt, 200 grain LRNFP.

Outpost75
02-24-2019, 11:35 AM
6 grains of Bullseye or TiteGroup also shoot well. Both are also safe in the 1873 Winchester as long as you exercise care to avoid inadvertent double-charges. I charge cases a block of 50 at a time and check with a penlight. If unable to so this, the Red Dot suggestion above is best IF you have a powder measure able to meter its larger particle size uniformly and accurately.

Baltimoreed
02-24-2019, 11:44 AM
5.2 gr of clay dot with a 200 gr works in my original .44-40 1873 musket. Don’t have a .44-40 revolver so I can’t help you there. Start low and work up until the load, the way you sight, shoot and hold your revolver put the poa and the poi at the same spot. Have fun.

Texas by God
02-24-2019, 11:49 AM
Unique.

Beagle333
02-24-2019, 11:51 AM
I vote for Unique too. I use that in mine and am happy with it.

bob208
02-24-2019, 12:09 PM
I use unique in my .45colt,.44-40 and .38-40. unique is also my go to powder in lite .44 mag .41mag .38 spl. .357 9mm 9mm largo and many more.

StrawHat
02-24-2019, 12:23 PM
...I have a Uberti 44-40 Smokewagon...

Smokewagon needs smoke not smokeless. However, if you insist, I would recommend Unique for that cartridge.

Kevin

TNsailorman
02-24-2019, 12:41 PM
I used Unique also. Trail Boss is one also to consider. Your gonna love that ol .44. james

Cast_outlaw
02-24-2019, 12:43 PM
Vectan A1 has about the same burn rate as unique but much cleaner burning could try that if you can get it

TNsailorman
02-24-2019, 12:51 PM
I have never tried any of the Vectan powder but I might give it a try. And yes, Unique does burn dirty. Very useful but dirty. james

Cast_outlaw
02-24-2019, 02:15 PM
I have never tried any of the Vectan powder but I might give it a try. And yes, Unique does burn dirty. Very useful but dirty. james

I got a can 1.1lb of the faster vectan AS a while back it burn rate is in the infield ballpark range of tight group but much cleaner as the cases are brass collared and almost look like they were wire brushed after fireing in my 9mm just started using A1 for some 158gr swc in the 9mm very clean to also use a light loading around 5gr of AS in 44mag with 128gr 440 round ball sized 430 for a nice slow 750fps light plinker but clean