View Full Version : Need a RB N frame S&W grip frame template
oldhenry
02-11-2019, 12:13 PM
I had one years ago that I made from cardboard when I was fortunate enough to copy it from a friend's gun. I've looked everywhere & can't find it. I tried Cylinder & Slide & Brownells with no luck.
Anyone out there have one that I could copy or know of a source for one.
Thanks,
Henry
Dan Cash
02-11-2019, 02:07 PM
It is the same as a K or L frame.
NoZombies
02-11-2019, 02:25 PM
It is the same as a K or L frame.
It's close, but not the same.
I'm afraid I don't have much help for the OP though.
oldhenry
02-11-2019, 08:26 PM
It's close, but not the same.
I'm afraid I don't have much help for the OP though.
Zombies,
Your input was enough. I had ordered a set of RB "N" from Altamont & expected more of a change & therefore had doubts...…..once I remove the metal, I can't put it back.
Here are those grips on a #64 RB. The big difference is @ the upper end (image #1...... area marked with a MM) and very minor difference on the underside about midway.
Thanks for your help.
Henry
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.