View Full Version : Does anyone make?
cabezaverde
02-10-2019, 05:15 PM
I need a custom spud for my Lyman M die. My cylinder throats are .454" in my 45 colt, and the spud I have doesn't open the case enough and the bullet gets sized down.
I seem to remember that someone on the board made these?
Minerat
02-10-2019, 05:33 PM
Check out NOE. They may have what you need.
http://noebulletmolds.com/NV/index.php?cPath=565_89&sort=2a&page=2&osCsid=b2q0k38hlgh3vh741p2kq4gh86
cabezaverde
02-10-2019, 05:57 PM
Check out NOE. They may have what you need.
http://noebulletmolds.com/NV/index.php?cPath=565_89&sort=2a&page=2&osCsid=b2q0k38hlgh3vh741p2kq4gh86
So how many thousands under boolit size would I want?
Outpost75
02-10-2019, 07:15 PM
If you plan to roll crimp 0.001" smaller is OK. In cartridges which are taper crmiped only go 0.002"
Dieselhorses
02-11-2019, 12:42 AM
Wouldn't a universal expanding die work?
Walks
02-11-2019, 12:48 AM
The Universal expanding die only opens the case mouth wider. It does nothing to expand the case body below the mouth of the case.
cabezaverde
02-11-2019, 03:30 PM
Check out NOE. They may have what you need.
http://noebulletmolds.com/NV/index.php?cPath=565_89&sort=2a&page=2&osCsid=b2q0k38hlgh3vh741p2kq4gh86
Thanks, this worked out great.
Minerat
02-11-2019, 08:32 PM
Thanks, this worked out great.
Glad to help. You'll be happy with them too.
Dieselhorses
02-11-2019, 08:38 PM
The Universal expanding die only opens the case mouth wider. It does nothing to expand the case body below the mouth of the case.
Thanks, I misread the post concerning "spud".
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.