BPCR Separated Case Extractors

[texasmac]

Guys,

If you’re interested, here’s a link to short article just published in The Single Shot Exchange Magazine titled, BPCR Broken Shell or Separated Case Extractors.

http://www.texas-mac.com/BPCR_Broken_Shell_or_Separated_Case_Extractors.htm l

Wayne

[John in PA]

Great post!

[texasmac]

Great post!

Thanks John,

The one method I failed to include is to use a bronze bore brush slightly larger than the bore diameter. With the brush screwed into a cleaning rod, push the brush it into the remaining case and pull it back. The bristles will should catch inside the separated case and it pull it out.

Wayne

[country gent]

The chamber brush on Gi tools did and excellent job pulling separated cases from m 1as and garands. I have used bore brushes in the past to pull them also. Another way s to wrap a patch around the brush and push thru from muzzle the brush patch will catch the case and push it out.