Michael J. Spangler
01-22-2019, 09:33 PM
I was hoping someone could suggest a solution for me.
I have a tang sight to install on my 1873.
The instructions state to sight the rifle in at 100 yards and then set the tang sight to the middle of its adjustment (85 clicks) and line up with your front and rear sights. Now drill and tap.
This gives you about 42 clicks up or down. Each click being about 1/4” at 100 yards per their website.
42 clicks is about 10 MOA which seems ok for 100 yard work but I really like reaching out with this rifle.
I like to shoot 200, 300 and I would like to try for the 500 yard steel at my club.
Would I be better served setting the tang sight at its lowest (or close to) setting with my irons set to 100 yards?
Giving myself say 70 or so clicks to play with?
Also I really like mixing it up with 38s and 357s.
Looking at some ballistic charts with a 100 yard zero seems like this small post doesn’t give me much room to get beyond 200 yards or so with 357 and less for 38 special.
Maybe I’ve answered my own question.
What would you do? Switch to a taller post? Use the peep for close up detail work with the 38 special and use the buckhorn for the long range steel plinking? Vice versa?
I can hit he 200 yard steel regularly with the buckhorns so putting a peep on for that close work doesn’t seem to make sense
I can only hunt coyote with that rifle in my state and if I hunter deer in a local state I wouldn’t be taking shots past 100 yards with a 357 at which distance I’m comfortable using the buckhorns.
What would you do?
I have a tang sight to install on my 1873.
The instructions state to sight the rifle in at 100 yards and then set the tang sight to the middle of its adjustment (85 clicks) and line up with your front and rear sights. Now drill and tap.
This gives you about 42 clicks up or down. Each click being about 1/4” at 100 yards per their website.
42 clicks is about 10 MOA which seems ok for 100 yard work but I really like reaching out with this rifle.
I like to shoot 200, 300 and I would like to try for the 500 yard steel at my club.
Would I be better served setting the tang sight at its lowest (or close to) setting with my irons set to 100 yards?
Giving myself say 70 or so clicks to play with?
Also I really like mixing it up with 38s and 357s.
Looking at some ballistic charts with a 100 yard zero seems like this small post doesn’t give me much room to get beyond 200 yards or so with 357 and less for 38 special.
Maybe I’ve answered my own question.
What would you do? Switch to a taller post? Use the peep for close up detail work with the 38 special and use the buckhorn for the long range steel plinking? Vice versa?
I can hit he 200 yard steel regularly with the buckhorns so putting a peep on for that close work doesn’t seem to make sense
I can only hunt coyote with that rifle in my state and if I hunter deer in a local state I wouldn’t be taking shots past 100 yards with a 357 at which distance I’m comfortable using the buckhorns.
What would you do?