Question about using Titegroup in 12 gauge loads

[blazing lead]

I was looking at the Hodgon load data website and they have loads listed using Titegroup powder, This peeked my interest as I have lots of it on hand for pistol calibers I load for. the lightest load I see they have listed is for one ounce. My question is would it be okay to use this data for a Lee 7/8 oz slug.Or would anyone know of a source of load data for 7/8 oz loads.The loads listed below are starting and middle of the road so I assume I would be ok.


Hodgdon Titegroup Rem. 209P Rem. TGT 12 17.3 8,900 PSI 1,235 fps
Hodgdon Titegroup Rem. 209P Rem. TGT 12 18.6 10,100 PSI 1,290 fps

[megasupermagnum]

I've shot titegroup before with 1 ounce shot loads. I liked it better than titewad. I don't use either anymore, as I found 700x to be a better powder. Those loads are fine to use with the Lee slugs.

[blazing lead]

thanks for the reply, I figured since it was lighter it should be OK.