Shell holder adapter?

[nvreloader]

Guys

Does anyone have an Idea where to find a standard shell adapter that will fit a reloading press (major common styles),
that has a female shell holder dimensions on one end and male standard shell holder dimensions on the other end.

I have one, I bought a long time ago, but don't want to cut it down to fit the Lyman 45 sizer,
I am converting over, to use NOE bullet pushing rods etc.

Tia,
Don

[skeettx]

This?

https://ads.midwayusa.com/product/225116/hornady-universal-extended-shellholder?utm_medium=shopping&utm_source=google&utm_campaign=Reloading+-+Dies+%26+Shellholders&utm_content=225116&cm_mmc=pf_ci_google-_-Reloading+-+Dies+%26+Shellholders-_-Hornady-_-225116&gclid=EAIaIQobChMIuKzY_4eA4AIVl__jBx1y7gpJEAQYASAB EgJ3M_D_BwE

[jaguarxk120]

Hornady makes a shell holder extension, please note it is heat treated.
The shell holder is held in place by a set screw.

[targetfreak]

Tough to figure out what the OP is looking for. Perhaps a bit more description?

[nvreloader]

Thanks

Skeettx and Jaguarxk120
You have hit the nail on the head, just what I am looking for......

Tia,
Don

[ulav8r]

https://www.midwayusa.com/product/225116/hornady-universal-extended-shellholder Skeettx's link did not work for me, so I found it from Midway's home page. It is much like one I made when I started loading 380 on my Texan c press. Shortened the stroke needed and speeded the processing. Made mine the same diameter as the press ram. It is packed away somewhere, don't remember the length but about 1 to 1 1/4 inch long.

[nvreloader]

These extenders are helpful for very short case use etc. RCBS also make one, I just found etc.
They are called Universal Shell Holder Extension.
https://www.huntingtons.com/store/product.php?productid=19668&cat=250&page=1

I use mine all the time, when forming my wildcat 17/20/22 caliber cases, reformed from the 22 hornet, 223 and 5.7 mm cases,
that has a total overall case length of .600", sure makes life easier.

Waiting for the Pony Express to run by here.

Tia,
Don