PDA

View Full Version : Help finding parts for a Pacific Multi Power



ScatterBrain
01-21-2019, 01:09 PM
I just purchased a Pacific Multi Power the ram has been converted to universal shell holders but it has no priming parts other then the catch tray, it looks a lot like the RCBS and Lyman will any of those primer parts work? or does anyone know where i could get it?

Kevin

Pressman
01-21-2019, 07:33 PM
The primer arm is universal in that different brands all interchange. Get an RCBS as finding the correct Pacific will be more about luck than anything. And Pacific does not have their name on the arm.
Ken

avogunner
05-05-2019, 08:59 AM
.....And Pacific does not have their name on the arm....

Mine does... https://uploads.tapatalk-cdn.com/20190505/beb7303719408599fb62de27c7b47ac3.jpg

Sent from my LG-H820 using Tapatalk

Pressman
05-07-2019, 06:14 AM
Good catch, avogunner.
Someday, when I get time, I should make a photo ID of all the primer arms.

gwpercle
05-07-2019, 01:36 PM
CH4D makes some universal rams and priming arms . Not sure what all they have or what you need but they might be of help.
They helped me get a Eagle Cobra 300 reloading press up and running again...parts for those aern't exactly every day finds but a phone call was all it took. Nice folks too .
Gary

avogunner
05-13-2019, 04:43 PM
Good catch, avogunner.
Someday, when I get time, I should make a photo ID of all the primer arms.That would be interesting. Just let me know if you would like one of mine off the press.
Semper Fi.

Sent from my LG-H820 using Tapatalk