need a lyman sizer rachet

[mto7464]

just bought a bunch of stuff and included was a 450 sizer but the rachet is missing. Where can I get one? I don't see it in the grafs catalog.

[fatnhappy]

it's a chapman ratchet, google it. about a million places sell chapman tools, proudly made in the USA btw

[hornsurgeon]

i prefer made in the usa, but if you find that hard to get, checkout harbor freight. they sell a set of wratcheting wrenches for $6-8, i think the one you need is 1/4" if i remember correctly.

[beemer]

I bought one of the reversable Champion ratchet screwdrivers from Sears. Any 1/4 ratchet will do, I just checked it to see if we remembered the size.

beemer

[mto7464]

thanks

[MtGun44]

I picked up a couple of inexpensive stamped and riveted 1/4" drive
rachets at a airshow a couple of years ago, switch for reversing instead
of flipping it over. They only cost about $2 each., Harbor freight quality,
kinda OK, nothing fancy and not junk. My Chapman broke down, was
why I was looking.

Bill

[imashooter2]

Any old 1/4 inch socket set will do the trick. You probably already have what you need.

[bruce drake]

A 1/4 inch socket has been what I've been using for 5 years on my Lyman 45 Sizer. Works for me.

Bruce

[monadnock#5]

If you don't already own a gunsmith screwdriver set, buy the Chapman kit that comes with the ratchet. Kill two birds with one stone.

[buster]

I just got one from lyman last week when I ordered some other parts for my 450, it was 7.00 bucks,part no. #2745804.

[straight-shooter]

Just yesterday I purchased a 1/4" craftsman rachet wrench from Sears. It was only $5.99