View Full Version : need a lyman sizer rachet
mto7464
10-09-2008, 08:53 PM
just bought a bunch of stuff and included was a 450 sizer but the rachet is missing. Where can I get one? I don't see it in the grafs catalog.
fatnhappy
10-09-2008, 08:57 PM
it's a chapman ratchet, google it. about a million places sell chapman tools, proudly made in the USA btw
hornsurgeon
10-09-2008, 08:59 PM
i prefer made in the usa, but if you find that hard to get, checkout harbor freight. they sell a set of wratcheting wrenches for $6-8, i think the one you need is 1/4" if i remember correctly.
beemer
10-09-2008, 10:13 PM
I bought one of the reversable Champion ratchet screwdrivers from Sears. Any 1/4 ratchet will do, I just checked it to see if we remembered the size.
beemer
mto7464
10-09-2008, 11:10 PM
thanks
MtGun44
10-09-2008, 11:55 PM
I picked up a couple of inexpensive stamped and riveted 1/4" drive
rachets at a airshow a couple of years ago, switch for reversing instead
of flipping it over. They only cost about $2 each., Harbor freight quality,
kinda OK, nothing fancy and not junk. My Chapman broke down, was
why I was looking.
Bill
imashooter2
10-10-2008, 07:33 AM
Any old 1/4 inch socket set will do the trick. You probably already have what you need.
bruce drake
10-10-2008, 08:18 AM
A 1/4 inch socket has been what I've been using for 5 years on my Lyman 45 Sizer. Works for me.
Bruce
monadnock#5
10-10-2008, 10:47 AM
If you don't already own a gunsmith screwdriver set, buy the Chapman kit that comes with the ratchet. Kill two birds with one stone.
buster
10-10-2008, 02:16 PM
I just got one from lyman last week when I ordered some other parts for my 450, it was 7.00 bucks,part no. #2745804.
straight-shooter
10-10-2008, 10:58 PM
Just yesterday I purchased a 1/4" craftsman rachet wrench from Sears. It was only $5.99
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.