View Full Version : Want to try Lee 429-240-2R or Lee 429-200-RF
Lostinidaho
01-04-2019, 11:11 PM
I want to try Lee 429-240-2R or Lee 429-200-RF. Preferably the 429-240-2R.
Is there anyone who could cast me about 20 bullets
Thanks in Advance
Lost
sghart3578
01-05-2019, 04:29 PM
I have both of those molds. I can send you 50 of each if you like.
Do you want them as cast and unsized?
On my molds I "beagle" them to get them up to the diameter (.432") that I need for my rifle.
I can send them enlarged or I can cast them the regular size.
Let me know me if you want them lubed or bare.
Steve in N CA
Conditor22
01-05-2019, 08:23 PM
I also have both, cast and powder coated. I quit using lube years ago.
PM me if you decide to go this way.
sghart3578
01-06-2019, 10:15 AM
Sounds like Conditor22 has you taken care of.
At this point I will pull out and leave it to you guys.
Best of luck.
Ohio Rusty
01-08-2019, 04:10 PM
I have the 429-240 2R cast up also. I have some you can have that are sized at .430 and lubed. or I have them unsized and unlubed. I cast quite a few of these as my nephew likes to shoot his .44 pistol and these he can shoot alot of cheaply. I typically will load 16.5 grains of 2400 for a 'playing around' load for the nephew.
Ohio Rusty ><>
Conditor22
01-08-2019, 06:52 PM
:oops:After an extensive search, my 429-240 2R must have decided to go on vacation or? I don't remember loaning it... **** guess It's time to do a deeeeeep clean [smilie=b:
I sent the 429-200-RF plus something else yesterday. OP still needs 429-240 2R.
Lostinidaho
01-10-2019, 12:03 PM
Thanks to all that have helped me get some bullets to try. This site has a lot of good people.
Thanks again
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.