CFE Black?

[Texas by God]

Does anyone use this in the .300 Blackout? I've used W296, H110, and LilGun with success but I'm wondering about the CFE offering.

[Handloader109]

Way better in my opinion in an AR type. The gun will cycle as it is supposed to. Never have been able to make h110/296 work.

[Minerat]

Read some where it can be used for subsonic loads and was designed for the 300 blackout. But have not found any data. I got it for use in my 17HH but have not had a chance to try it.

[Texas by God]

I looked it up which it's what I should have done in the first place. Yes it is meant for subsonic loads; I don't use them.
Thanks, guys.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Loudy13]

I use CFE Black for 3 or 4 different black out loads and I like the powder, it fills the case nicely and have had good results with the chronograph and accuracy. I don't use if for sub loads though just supers.

[MT Chambers]

It is very close to AA1680 but with a copper fouling eraser, I plan to use it in my BO as well as my .218 Mashburn Bee, it is recommended for the hornet and the K-hornet and it was a hard powder to find in the stores.

[popper]

I use it, gets a little dirty if not full load. So far only tested in pistol with 185gr & 165gr. Close range I got a couple doubles, red dot..