686
10-03-2008, 01:35 PM
does any one have pictures of adding a screw on the rt side of the block for the spru handel to press against when open the mold. it is to keep from wearing out the side of the mold. i fave 2 new molds and thought i would add this. i already put a screw in the handles to keep them from slipping off and add a set screw to the spru screw to keep it from working out. after messing up 2 lee molds from lead smear and digging in to the block i found the best thing to doo to the mold. BULL PLATE LUBE... it goes on all my moulds alum and steel. if you are not using this stuf you are missing the boat. thanks for any help on the screw.