Love Life
11-09-2018, 04:03 PM
I have the following stuff for sale:
2000 copper 8mm Gas checks. I bought these from Blammer a few years back. Included with the gas checks is a box of 32 caliber Ideal brass gas checks. $60.00 shipped:
230161
RCBS 9mm-124-RN mould. This is the gas checked version. I've shot it with and without the gas checks. It is more accurate with gas checks. Has a fat gas check shank so 35 caliber gas checks are a tight fit. I used this boolit for my moms 9mm AR $45.00 Shipped.
230162
RCBS 10mm-200-SWC. A nice 200 grain bevel base SWC for the 10mm. This is a quality casting mould that will please any 10mm shooter. $57.00 shipped:
230163
Lyman 35891 (not a typo). Also "U5" is stamped on the mould. Casts large at .361, and the seam is visible but sizes nicely. Good wadcutter bullet for the 38 special and 357 magnum. DOES NOT have handle pins. $30.00 shipped.:
230164
NOE 325365GC 8mm mould. This is a single cavity mould I ordered for maximum consistency. I've cast 100 boolits from this mould and it is a very good mould. $50.00 shipped:
230165
NOE 358-124-TC GC. A good mould for 9mm. Very accurate in all of my 9mm pistols. This is a gas check mould and rains out good bullets quickly. The staining on the mould is metal preservative. I will clean it all off before it ships. $75.00 shipped:
230166
NOE 452-200 SWC. The classic H&G clone profile for 45 ACP pistols. Casts a very nice 200 gr SWC at .453 out of 95/2.5/2.5 alloy. Staining is metal preservative and I will clean it off before it ships. $70.00 shipped:
230167
NOE 360477 GC HP. This is the NOE 358477 clone. This is a gas checked mould with hollow and flat point pins. Casts a very nice .360 boolit. Metal preservative will be cleaned off before shipping. $50.00 shipped:
230168
Payment by Paypal G&S. I'm in Beaufort, SC if anyone wants to pick up in person.
2000 copper 8mm Gas checks. I bought these from Blammer a few years back. Included with the gas checks is a box of 32 caliber Ideal brass gas checks. $60.00 shipped:
230161
RCBS 9mm-124-RN mould. This is the gas checked version. I've shot it with and without the gas checks. It is more accurate with gas checks. Has a fat gas check shank so 35 caliber gas checks are a tight fit. I used this boolit for my moms 9mm AR $45.00 Shipped.
230162
RCBS 10mm-200-SWC. A nice 200 grain bevel base SWC for the 10mm. This is a quality casting mould that will please any 10mm shooter. $57.00 shipped:
230163
Lyman 35891 (not a typo). Also "U5" is stamped on the mould. Casts large at .361, and the seam is visible but sizes nicely. Good wadcutter bullet for the 38 special and 357 magnum. DOES NOT have handle pins. $30.00 shipped.:
230164
NOE 325365GC 8mm mould. This is a single cavity mould I ordered for maximum consistency. I've cast 100 boolits from this mould and it is a very good mould. $50.00 shipped:
230165
NOE 358-124-TC GC. A good mould for 9mm. Very accurate in all of my 9mm pistols. This is a gas check mould and rains out good bullets quickly. The staining on the mould is metal preservative. I will clean it all off before it ships. $75.00 shipped:
230166
NOE 452-200 SWC. The classic H&G clone profile for 45 ACP pistols. Casts a very nice 200 gr SWC at .453 out of 95/2.5/2.5 alloy. Staining is metal preservative and I will clean it off before it ships. $70.00 shipped:
230167
NOE 360477 GC HP. This is the NOE 358477 clone. This is a gas checked mould with hollow and flat point pins. Casts a very nice .360 boolit. Metal preservative will be cleaned off before shipping. $50.00 shipped:
230168
Payment by Paypal G&S. I'm in Beaufort, SC if anyone wants to pick up in person.