Hard to find

[vrh]

Lost the double trigger set screw out of my CVA Mountain rifle. Went to the local hardware store. No luck. Didn't have one that fits.
Where can I find one at ?

[pietro]

.

I would think that CVA uses the same screws for all their DST's, regardless of "model".

I would suggest that you telephone CVA Customer Service & tell them the screw you need.

CVA Customer Service Department
1270 Progress Center Ave. Suite 100
Lawrenceville, GA 30043
(770) 449-4687


.

[arcticap]

AFAIK Deer Creek Products has more CVA parts than anyone else:--->>> https://www.deercreekproducts.net

Or possibly Dixie Gun Works, Track of the Wolf or eBay if they don't have it.

Another long shot would be to see if a Traditions screw would fit.

Try to at least get the thread spec's for the screw.

[country gent]

Its easier to match up the screw with the screw it self on hand. measuring the tapped holes id and looking at a tap drill chart will give an idea of size. most gun screw s are nef ( National extra fine) or metric extra fine pitches. You might try a screw from a scope ring if it fits its either 8 48 or 6 48. Matching a internal thread up is tricky at times

[John Taylor]

probably metric.

[1Hawkeye]

Try either Log cabin shop or Deer creek products they both have a lot of CVA spare parts.

[indian joe]

lost the double trigger set screw out of my cva mountain rifle. Went to the local hardware store. No luck. Didn't have one that fits.
Where can i find one at ?

metric m3 x 0.5