View Full Version : Alliant 2400?
Longhunter7
10-04-2018, 10:20 PM
I came across a good deal on reloads with 23 gr. of 2400 and hard cast 450 gr. flat point bullets. I can't find any data to help me determine the velocity and if that is a safe load using pistol powder? :?:
JonB_in_Glencoe
10-04-2018, 10:35 PM
for 500 S&W Mag?
zymguy
10-04-2018, 10:38 PM
Dont shoot mystery reloads. Its not safe. Why risk your gun or more to save money? my over valued two cents
Time Killer
10-04-2018, 10:38 PM
First do you know who reloaded these and how much do you trust them. Second I would pull a bullet and verify the powder weight before I did anything else. Third more info is needed such as caliber, over all length etc. I only shoot reloaded ammo from a know source that I trust. Since I reload myself that does not happen often but occasionally I will try out a friends gun that he reloads for.
Longhunter7
10-04-2018, 10:39 PM
Sorry about that! I meant to mention the loads are for a .45/70 Marlin lever action!
JonB_in_Glencoe
10-04-2018, 10:55 PM
45-70 in a Marlin, eh. ...If I was gonna shoot those in my gun, I'd look up some data in a few different manuals.
BUT...judging by these two threads, you are 'Probably' OK with 23gr under a hard cast 450 gr. flat point bullet.
http://castboolits.gunloads.com/showthread.php?174000-Published-data-for-45-70-with-A2400
http://castboolits.gunloads.com/showthread.php?340968-2400-45-70-trapdoors
JonB_in_Glencoe
10-04-2018, 10:57 PM
You threw a curveball by me, when you mentioned pistol powder.
technically, 2400 was designed for 22 hornet ...um, ur, maybe that was 22 Hornet was designed for 2400? :veryconfu
JonB_in_Glencoe
10-04-2018, 11:06 PM
http://castpics.net/dpl/index.php/reloaders-reference/reloading-manuals/190-ideal-handbook-38
There is some published data in this manual for a 340gr cast boolit.
PS, I took the time to post this, mostly because they list a duplex load for 405gr boolit...a small dab of pistol powder under 60+ gr (enough for compressed load) of wholly Black (FFg) :shock:
Longhunter7
10-04-2018, 11:19 PM
JonB,
thank you for the links! It appears that A2400 is a popular powder even for Trapdoor rifles!
Longhunter7
10-04-2018, 11:23 PM
JonB,
The reason I mentioned A2400 as a pistol powder, is when I looked up load data, all I saw was pistol data. It was't listed as a rifle powder!
Char-Gar
10-04-2018, 11:33 PM
The load would be a good and fairly low presure load for the 45-70. That said, never shoot somebody elses reloads..never. If you don't load em, don't shoot em.
I will never use anyone's reloads unless I personally know the person well enough to trust their ability to reload good ammo. Unknown to me and it's a no-go. That being said, I use 2400 in the 45-70 quite a bit. In fact, some of my best loads are shot with that powder. I don't condone using those shells, but the load's not "hot" at all.
fatelk
10-05-2018, 01:09 AM
It sounds like 23gr is a safe enough load, so long at there's not a couple in there with 46gr instead, by accident (or even one).
Wayne Smith
10-05-2018, 12:45 PM
Pull them down, save the components, and reload to your hearts content. That's what I would do with someone else's reloads unless it was Erv, my best friend, engineer, whom I taught to reload.
fredj338
10-05-2018, 03:32 PM
Yeah the golden rule of shooting is you do NOT shoot other peoples reloads, unless they are lic & bonded for your protection. Sure it is supposed to be 23gr of 2400, but???
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.